[2024年10月21日]301a試験問題集で100%合格率301a試験！
試験問題集リアルLTM Specialist問題集150解答を試そう！
F5 301A試験は、F5 LTMアーキテクチャ、展開、および管理に関連する幅広いトピックをカバーする包括的な試験です。ネットワーク設計、ネットワークプロトコル、ロードバランス、SSLオフロードなどのトピックに関する質問が含まれています。また、高可用性、セキュリティ、パフォーマンスチューニングなどの高度なトピックについてもカバーしています。
F5 301A試験は、F5認定VIG-IP管理者（F5-CA）認定プログラムの一部です。認定プログラムは、F5 BIG-IPソリューションの使用におけるIT専門家のスキルと知識を検証するように設計されています。 F5-CA認定はグローバルに認識されており、IT雇用主によって高く評価されています。
質問 # 55
A VCMP guest has the following characteristics:
* Resources allocated for CPU memory, network interfaces, and disk space
* Virtual disk created
* The guest is NOT running
The guest is NOT running in which state is the VCMP guest
- A. Provisioned
- B. Deployed
- C. Configured
- D. Offline
正解：A
質問 # 56
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
正解：A
質問 # 57
Refer to the exhibit.
The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?
- A. LTM1: Traffic Group C
LTM2: Traffic Groups A, B, and 0 - B. LTM1: Traffic Groups B and C
LTM2: Traffic Groups A and 0 - C. LTM1: No Traffic Groups
LTM2: Traffic Groups A, B, C, and D - D. LTM1: Traffic Groups A, B, C, and D
LTM2: No Traffic Groups
正解：C
解説：
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.
質問 # 58
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.90.0.1 and 10.100.0.1
- B. 10.90.0.1 and 10.12.0.1
- C. 10.120.0.1 only
- D. 10.100.0.1 and.10.120.0.1
正解：D
質問 # 59
While working with a web developer, it is determined that additional logic is required to assess the pool member availability.
Which two monitor types should be used in this scenario? (Choose two)
- A. Gateway ICMP
- B. TCP Echo
- C. TCP
- D. External
- E. Scripted
正解：D、E
質問 # 60
An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:
tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages) No DoS attacks arc occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue?
- A. use a OneConnect profile
- B. change the Adaptive Reaping High watermark
- C. change the Adaptive Reaping Low watermark
- D. allocate less memory to the RAM cache feature
正解：C
質問 # 61
AN LIM Specialist must upgrade the VCMP Guest active/standby LTM pair from version 11.3 to 11.5.3 on two VCMP Hosts.
where should the LTM Specialist import the latest 11.5.3 ISO images?
- A. to both VCMP Hosts
- B. to the secondary vCMP Host and the standby Guest instance
- C. to the VCMP Guest instances
- D. to the primary VCMP Host and the active Guest instance
正解：C
質問 # 62
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?
- A. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
- B. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
- C. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
- D. TCP monitor, change transparent option to Yes, and sot the alias to port 80
正解：A
質問 # 63
An LTM Specialist configures a new HTTPS virtual server that contains a valid example.com ssl certificate. The LTM Special receives an error in the browser when connecting.
What must be added to the SSL Client profile to fix this issue?
- A. An intermediate certificate
- B. A sell-sign certificate
- C. A public root certificate
- D. A new example com certificate
正解：A
質問 # 64
Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?
- A. Leas Connections
- B. Least Sessions
- C. Observed
- D. Dynamic Ratio
正解：B
解説：
Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.
質問 # 65
The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.
* The following requirements are provided:
* http proxy setup for security
persistence information available to the HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.
Which persistence profile should be used?
- A. Cookie insert
- B. Source Address Affinity
- C. Universal
- D. Destination Address Affinity
正解：A
質問 # 66
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Standby / LTM2 Standby
- B. LTM1 Standby / LTM2 Active
- C. LTM1 Active /LTM2 Active
- D. LTM1 Active / LTM2 Standby
正解：D
質問 # 67
Where does a LTM Specialist view all of the objects that are part of a deployed iApp?
- A. Local Traffic . Virtual Servers > Applications
- B. IAP > Application Service > Components
- C. iAPP> Application Policy > Objects
- D. Local Traffic > Network Map > View Map
正解：B
質問 # 68
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Performance HTTP
- B. Stateless
- C. Standard
- D. Internal
- E. Forwarding IP
正解：C、D
質問 # 69
A virtual server configuration for traffic destined to a server is as shown:
FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?
- A. MyV53
- B. MyVS2
- C. MyVS4
- D. MyVS1
正解：B
質問 # 70
An LTM Specialist needs to terminate client SSL traffic and based on the cookie presented by client.
Which set of profiles should the LTM Specialist use?
- A. HTTP, Server SSL, SSL Cookie Profile
- B. HTTPS, Server SSL, SSL Cookie Profile
- C. HTTPS, Client SSL, Cookie Persistence Profile
- D. HTTP, Client SSL, Cookie Persistence Profile,
正解：D
質問 # 71
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
- B. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- C. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
- D. a custom TCP monitor that works on port 9080,
- E. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- F. a custom TCP monitor that works on port 8080
正解：C、F
質問 # 72
An LTM specialist needs to create a new account with the admin role called "newadmin' and access to all partitions.
Which tmsh command should be executed?
- A. create /users newadmin partition-access add {all-partitions {role admin JJ prompt for-password.
- B. create /auth user newadmin partition-access add {all-partitions {role admin }} prompt for-password.
- C. create / sys user newadmin partition-access add (all-partitions {role admin )} prompt-for-password.
- D. create /user newadmin partition-access add (all-partitions {role admin }} prompt- for-password.
正解：B
解説：
Examining the use of commands, the creation of user is subordinate to auth
質問 # 73
......
あなたを余裕で301a試験合格させます！100%高合格率保証：https://jp.fast2test.com/301a-premium-file.html
301a問題集本日限定！無料アクセス可能に！：https://drive.google.com/open?id=1GWgcY1QNmX33PF7Hm6wRrFyD5MeTFIII