問題集を購入するなら最新の2025年03月11日 301a試験問題と解答PDFで一年間無料更新 [Q10-Q30]

Share

問題集を購入するなら最新の2025年03月11日 301a試験問題と解答PDFで一年間無料更新

時間限定無料ダウンロード!最新の301a問題集で2025年最新の301a試験問題


F5 301a試験は、F5 BIG-IP LTMソリューションを展開し管理するスキルを向上させ、キャリアを進めたいネットワーク専門家にとって優れた認定資格です。この認定資格は業界の専門家によって認められており、競争力のある就職市場で個人を際立たせることができます。この認定資格は、F5のオンラインコミュニティへのアクセスを提供し、そこで他のF5専門家とつながり、知識やベストプラクティスを共有することができます。


F5 301A試験に合格するには、F5 LTMとその知識を実際のシナリオに適用する能力を深く理解する必要があります。成功した候補者は、複雑なF5 LTM環境を設計および展開し、一般的な問題をトラブルシューティングし、パフォーマンスを最適化する能力を示します。

 

質問 # 10
An ITM Specialist has the configuration shown:

The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?

  • A. 10.120.0.1 only
  • B. 10.90.0.1 and 10.100.0.1
  • C. 10.90.0.1 and 10.12.0.1
  • D. 10.100.0.1 and.10.120.0.1

正解:D


質問 # 11
Exhibit.

Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?

  • A. LTM1 Standby / LTM2 Active
  • B. LTM1 Active /LTM2 Active
  • C. LTM1 Active / LTM2 Standby
  • D. LTM1 Standby / LTM2 Standby

正解:C


質問 # 12
A web server's default gateway is the network router. The LTM Specialist needs to introduce an LTM device to load balance to the web servers without changing the server's default gateway.
Which deployment method and settings should the LTM Specialist use to ensure correct traffic flow and that the web servers can obtain the actual con IP addresses?

  • A. SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers
  • B. SNAT deployment with automap configured
  • C. route deployment with Automap configured and X-Forwarded-For inserted in HTTP headers
  • D. route deployment without SNAT configuration

正解:A


質問 # 13
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?

  • A. Standard
  • B. Stateless
  • C. Forwarding (Layer 2)
  • D. Forwarding (IP)
  • E. DHCP relay

正解:D


質問 # 14
A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.
Which of the following two tasks must be completed to meet the requirements? (Choose two)

  • A. configure the client SSL profile with "Client Certificate" set to require
  • B. configure the client SSL profile with the Trusted .Certificate Authorities
  • C. generate a CSR to register a certificate with the CA
  • D. instruct the desktop team to update the web browser to the most recent release
  • E. configure the server SSL profile with "Client Certificate" Set to require

正解:A、B


質問 # 15
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?

  • A. HTTP monitor and Receive String "error'' ... flag is up
  • B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
  • C. HTTP monitor and Receive Disable String "error'' .... flag is disable
  • D. HTTP monitor, Receive String "error", and set the Reverse option to Yes

正解:D


質問 # 16
A virtual server is configured to handle https traffic. The clientssl profile is configured to use a2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.
What two effects will this change have on the BIG-IP device? (Choose two)

  • A. Increase of TLS Renegotiation
  • B. Decrease to 90% of licensed TPS
  • C. Increase of CPU usage on the BIG-IP device
  • D. Decrease to 20% of licensed TPS
  • E. Increased of concurrent connection on client-side

正解:C、D


質問 # 17
An organization's development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team's load balancing method needs to select a pool after taking into account the pool member's response over the time to avoid landing on a busy pool member.
Which of the following load balancing methods meets this requirement?

  • A. Observed (member)
  • B. Dynamic (node)
  • C. Fastest (application)
  • D. Predictive (member)

正解:D


質問 # 18
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

  • A. configure a OneConnect profile to mirror connections
  • B. configure a VLAN and primary mirroring address for mirror traffic
  • C. enable Clone Pools for a virtual server and a persistence profile
  • D. enable Mirroring for a virtual server and persistence profile
  • E. configure a serial failover cable for mirror traffic

正解:B、D


質問 # 19
An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.
What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:A

解説:
Both vs share the same snat pool, and both use the same pool member. Then the concurrent number of snatpool will be added. For each VS, there is a maximum of 35,000 users, and those two VSs have a maximum of 70,000 users. The stem did not mention how many connections each user would have concurrently. Calculated with a minimum of 1 connection, then 70,000 connections would be concurrent. One IP can support 65,535 connection. Therefore, at least 2 or more snaptips are required


質問 # 20
An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests.
What is the maximum number of guests that the LTM Specialist should upgrade at once?

  • A. Eight
  • B. TWO
  • C. Four
    Explanation
    Each guest is independent, just like hardware upgrades. Can only upgrade one by one, there is no way to upgrade at the same time.
  • D. One

正解:D


質問 # 21
Exhibit.

The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?

  • A. ConfigSync does NOT work. Connection Mirroring floes NOT work.
  • B. ConfigSync does NOT work; Connection Mirroring works
  • C. ConfigSync works Connection Mirroring works
  • D. ConfigSync works. Connection Mirroring docs NOT work

正解:B


質問 # 22
In an iApp, which configuration protects against accidental changes to an application Services configuration?

  • A. Components
  • B. Template
  • C. Strict Updates
  • D. Name

正解:C


質問 # 23
Consider the monitor configuration displayed below.

What is the status of a pool member that responds with ''200 OK''?

  • A. down
  • B. disabled
  • C. unknown
  • D. available

正解:A


質問 # 24
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)

  • A. webacceleration
  • B. http-transparent
  • C. http
  • D. stream
  • E. http compression

正解:A、C


質問 # 25
An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up The HTTP server sends the following response:

What is the resulting pool status?

  • A. Unavailable (Enabled)
    Available (Enabled)
  • B. Unknown (Disabled)
  • C. Offline (Enabled)

正解:A


質問 # 26
A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?

  • A. Disable Slow Start
  • B. Disable Nagle's Algorithm
  • C. Disable Selective ACKs
  • D. Disable Reset on Timeout

正解:A


質問 # 27
A virtual server configuration for traffic destined to a server is as shown:

FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?

  • A. MyVS2
  • B. MyV53
  • C. MyVS4
  • D. MyVS1

正解:A


質問 # 28
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?

  • A. TCP monitor, change transparent option to Yes, and sot the alias to port 80
  • B. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
  • C. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
  • D. HTTP monitor alias address 192 168.10 10. and set the alias to port 80

正解:C


質問 # 29
A customer wants to select the pool for an application based on information found in the path of the URL.
For example:
http://www.example.com/app 1 should be sent to the app 1 pool
http.//www.exampie.com/app 2 should be sent to the app2 pool
Which two profiles need to be assigned to the virtual server? (Choose two.)

  • A. TTP Compression
  • B. TCP
  • C. Persistence
  • D. HTTP
  • E. Client SSL

正解:B、D


質問 # 30
......


F5 301a試験は、BIG-IP LTMスペシャリストとして認定されたいITプロフェッショナルにとって重要な認定資格です。この試験では、BIG-IP LTMアーキテクチャ、セットアップ、展開の基本的なコンセプトがカバーされます。F5 301a試験に合格するためには、ネットワークコンセプトとプロトコルに関する強力な理解力が必要であり、F5プラットフォームに精通していることが望ましいです。F5は、試験に備えて候補者が準備するためのさまざまなトレーニングコースとリソースを提供しています。

 

検証済みの301a問題集と解答で一年間無料最速更新:https://jp.fast2test.com/301a-premium-file.html

最新のF5 301a認定の練習テスト問題:https://drive.google.com/open?id=1GWgcY1QNmX33PF7Hm6wRrFyD5MeTFIII


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어