[2024年01月最新リリース]1Y0-241問題集でCCA-AppDS認証
最新の完璧な1Y0-241問題集問題と解答で100%パスさせます
Citrix 1Y0-241試験は、トラフィック管理を備えたCitrix ADC 13を展開および管理する責任を持つITプロフェッショナルを対象としています。この認定試験は、Citrix ADC 13での作業経験がある個人を対象としており、この分野での知識とスキルを証明したい人を対象としています。試験では、インストールと設定、ロードバランシング、SSLオフロード、およびコンテンツスイッチングなど、さまざまなトピックがカバーされています。
Citrix 1Y0-241試験は、ITネットワーキングと交通管理の分野で高く評価されている認定です。 Citrix ADC 13との仕事の経験があり、このテクノロジーの展開と管理に関する専門知識を実証したい専門家を対象としています。この試験では、展開と構成、交通管理、セキュリティ、トラブルシューティング、監視など、幅広いトピックをカバーしています。
質問 # 60
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?
- A. Policy-based routes for each department in the nsroot partition
- B. Admin partitions that use dedicated VLANs
- C. A SNIP in each partition, and bind a VLAN for the department
- D. Dedicated routes in the admin partitions for each department
正解：B
解説：
Explanation
answer: A. Admin partitions that use dedicated VLANs
Short Explanation with reference: Admin partitions are a feature of Citrix ADC that allow administrators to create multiple logical partitions on a single physical appliance. Each partition is independent and isolated from the others, and has its own configuration, resources, and management. This enables administrators to delegate administration tasks to different departments or customers, while maintaining security and operational consistency1. Admin partitions can use dedicated VLANs to isolate the network traffic of each partition from the others2. A SNIP in each partition, and bind a VLAN for the department (option B) is also a valid way to isolate network traffic, but it does not provide configuration and management isolation. Policy-based routes for each department in the nsroot partition (option C) and dedicated routes in the admin partitions for each department (option D) are not relevant for isolating department-level administration, as they are used for routing traffic based on policies or routes3. Therefore, the correct answer is A. Admin partitions that use dedicated VLANs.
質問 # 61
Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing, attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?
- A. Enable the content switching feature
- B. Disable the spillover redirect URL.
- C. Check the priorities of the existing policies
- D. Bind a certificate
正解：C
質問 # 62
Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1
"!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\"Admin_group\"))"
RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?
- A. Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.
- B. All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.
- C. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.
- D. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.
正解：D
質問 # 63
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A private key
- B. A certificate revocation list (CRL)
- C. A certificate key-pair
- D. A certificate signing request (CSR)
正解：A
質問 # 64
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Two-arm
- B. One-arm
- C. Transparent
- D. Forward proxy
正解：A
解説：
Explanation
answer: B. Two-arm
Short Explanation with reference:
A two-arm deployment is a common scenario where the Citrix ADC appliance has two network interfaces, one connected to the DMZ network and the other connected to the internal network1. This allows the appliance to act as a gateway between the two networks and provide load balancing, security, and optimization features for the applications hosted on the internal servers2. A two-arm deployment also provides better isolation and protection for the internal network than a one-arm deployment, where the appliance has only one network interface connected to a switch or router that spans both networks3. A transparent mode is a packet forwarding mode that enables the appliance to act as a Layer 2 device and bridge packets that are not destined for it4. A forward proxy mode is a feature that enables the appliance to act as an intermediary between clients and servers on the internet, caching web content and applying policies. Neither of these modes are relevant for the scenario described in the question.
1: Citrix ADC at a Glance 2: Tech Paper: Best practices for NetScaler ADC Deployments 3: Configure a Citrix ADC BLX appliance with a network mode 4: Packet forwarding modes | NetScaler 14.1 : Configuring Forward Proxy | NetScaler 14.1
質問 # 65
Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?
- A. NSIP
- B. SNIP
- C. VIP
- D. MIP
正解：C
質問 # 66
Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair with an existing primary Citrix ADC with all resources configured. The administrator adds the secondary Citrix ADC in HA and discovers that the configuration on the existing primary was removed and is now the secondary Citrix ADC in the HA pair.
Which two configurations could the administrator have used to prevent this from happening? (Choose two.)
- A. Enable HA monitoring on all primary device interfaces.
- B. Set the primary Citrix ADC to stay primary in the Configure HA Node settings.
- C. Set the secondary Citrix ADC to stay secondary in the Configure HA Node settings.
- D. Enable HA monitoring on all secondary device interfaces.
正解：C、D
解説：
Forcing the node to stay secondary works on both standalone and secondary nodes. On a standalone node, you must use this option before you can add a node to create an HA pair. When you add the new node, the existing node stops processing traffic and becomes the secondary node. The new node becomes the primary node.
https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/forcing-a-secondary-node-to-stay-secondary.html On a standalone node, you must use this option before you can add a node to create an HA pair. When you add the new node, the existing node continues to function as the primary node, and the new node becomes the secondary node.
https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/forcing-the-primary-node-stay-primary.html
質問 # 67
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. Users to the group on the Citrix ADC
- B. A nested group to the new group
- C. An authentication, authorization, and auditing (AAA) action to the group
- D. A command policy to the group
正解：D
質問 # 68
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL bridge
- B. SSL profile
- C. SSL policy
- D. SSL multiplexing
- E. SSL policy
正解：B
解説：
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles.html
質問 # 69
Which setting is responsible for reducing the server load, improving response time, and increasing the number of SSL transactions per second on an SSL vServer?
- A. Session reuse
- B. Session timeout
- C. SSLv3
- D. SSLv2 redirect
正解：A
質問 # 70
A Citrix Administrator needs to block all DNS requests from subnet 10.107.149.0/24.
Which expressions can the administrator use to match the required traffic?
- A. CLIENT.IP.SRC(10.107.149.0) && client UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53)
- B. CLIENT.IP.SRC IN_SUBNET(10 107.149.0/24) && client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53)
- C. CLIENT.IP.SRC IN_SUBNET(10.107.149.0/24) && (client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53))
- D. CLIENT.IP.SRC(10.107.149.0) && (client.UDP.DSTPORT.EQ(53) || client TCP DSTPORT.EQ(53))
正解：C
解説：
Explanation
answer: D. CLIENT.IP.SRC IN_SUBNET(10.107.149.0/24) && (client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53)) Short Explanation with reference:
An expression is a logical statement that evaluates to true or false, and can be used to match the required traffic for various purposes, such as filtering, rewriting, or load balancing. An expression can use different operators, functions, and values to specify the criteria for matching the traffic. Some of the common elements of an expression are:
CLIENT.IP.SRC: This function returns the source IP address of the client request.
IN_SUBNET: This operator checks whether an IP address belongs to a specified subnet.
&&: This operator performs a logical AND operation between two expressions.
||: This operator performs a logical OR operation between two expressions.
client.UDP.DSTPORT and client.TCP.DSTPORT: These functions return the destination port of the client request for UDP and TCP protocols, respectively.
EQ: This operator checks whether two values are equal.
In this scenario, the administrator needs to block all DNS requests from subnet 10.107.149.0/24. DNS requests are typically sent over UDP or TCP protocols, and use port 53 as the destination port. Therefore, the expression that can match this traffic is:
CLIENT.IP.SRC IN_SUBNET(10.107.149.0/24) && (client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53)) This expression evaluates to true if the source IP address of the client request is in the subnet 10.107.149.0/24, and the destination port of the client request is 53 for either UDP or TCP protocol.
The other options are incorrect, as they either use the wrong function, operator, or syntax for matching the traffic. For example, option A uses the SRC function instead of the IN_SUBNET operator, which will only match a single IP address instead of a subnet. Option B uses an incorrect delimiter (space) between the subnet address and mask, which will cause a syntax error. Option C uses parentheses incorrectly, which will change the order of evaluation and result in a different meaning.
Configuring expressions | NetScaler : How to Configure an Expression to Filter Traffic - Citrix Customer Support : How to Use Operators in Expressions - Citrix Customer Support
質問 # 71
A Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections.
Which Citrix ADC mode can the administrator use to meet this requirement?
- A. USIP
- B. USNIP
- C. Layer 2
- D. Layer 3
正解：A
解説：
Explanation
When you enable the USIP address mode of a NetScaler appliance, the appliance forwards each packet to the appropriate back end server with the client IP address. https://support.citrix.com/article/CTX121974
質問 # 72
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL protocol for the vServer
- B. SSL bridge protocol for the services
- C. HTTP protocol for the vServer
- D. HTTP protocol for the services
- E. SSL bridge protocol for the vServer
- F. SSL protocol for the services
正解：A、F
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/end-to-end-encrypt.html
質問 # 73
Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?
- A. SNIP
- B. MIP
- C. NSIP
- D. VIP
正解：C
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-custom-monitors/configure Explanation with reference:
According to the Citrix documentation1, monitor probes originate from the NSIP address by default. However, if the subnet of a StoreFront server is different from that of the appliance, then the subnet IP (SNIP) address is used. Therefore, the correct answer is D. NSIP.
1: Citrix StoreFront stores monitoring | NetScaler 14.1
質問 # 74
Scenario: A Citrix Administrator configured the rewrite policies below:
bind lb vServer VIP1_http -policyName POL_14 -priority 120 -gotoPriorityExpression END -type REQUEST bind lb vServer VIP1_http -policyName POL_12 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer VIP1_http -policyName POL_15 -priority 100 -gotoPriorityExpression END -type REQUEST bind lb vServer VIP1_http -policyName POL_13 -priority 101 -gotoPriorityExpression NEXT -type REQUEST Which policy will be evaluated last considering POL_12 is hit first?
- A. POL_13
- B. POL_14
- C. POL_15
- D. POL_12
正解：C
質問 # 75
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
正解：C
質問 # 76
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- B. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
- C. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
- D. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
正解：A
解説：
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/adv-policy-exp-working-with-dates-times-and-numbers/exp-for-ssl-certificate-date.html
質問 # 77
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. DNS
- B. Integrated caching
- C. SSL
- D. System
正解：A、B
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/12-1/appexpert/policies-and-expressions/ns-pi-intro-pol-exp-wrapper-con
質問 # 78
......
Citrix 1Y0-241 認定試験に備えるためには、ネットワークの概念について良好な理解を持っており、Citrix ADC の展開と管理の経験を持っていることが望ましいです。また、試験の全トピックをカバーする推奨トレーニングコースを受講することをおすすめします。さらに、練習問題、学習ガイド、オンラインフォーラムなどの学習資料を活用して、試験に備えることができます。
最新の1Y0-241試験問題集でCitrix試験トレーニング：https://jp.fast2test.com/1Y0-241-premium-file.html
2024年最新のの問題1Y0-241問題集で最新のCitrix試験を使おう：https://drive.google.com/open?id=1DrpSSoXaZa6Jkz_jM4fEkD5UWBq9ta5a