究極のガイドは1Y0-241最新2024年03月15日時間限定！今すぐダウンロード！
2024年最新のな厳密検証された合格させる1Y0-241試験にはリアル問題と解答
質問 # 38
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that users have the certificate's private key.
- B. Ensure that users have the certificate's public key.
- C. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- D. Ensure that users have the server certificate installed.
正解：C
解説：
Explanation
https://support.citrix.com/article/CTX101990
質問 # 39
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?
- A. The junior administrator made the changes and did NOT force a failover to save the configuration.
- B. Both Citrix ADCs in the HA pair restarted overnight.
- C. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
- D. The Citrix ADC appliances have different firmware versions.
正解：B
質問 # 40
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL multiplexing
- B. SSL profile
- C. SSL policy
- D. SSL policy
- E. SSL bridge
正解：B
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles.html
質問 # 41
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
正解：B
解説：
- Pol1 has a prio of 90 so it's evaluated first
-gotoPrioExpression NEXT means that it will evaluate next item in the policy list
- Pol2 has a prio of 100, so it"s avaluated after Pol1
質問 # 42
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- B. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
- C. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
正解：B
質問 # 43
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE_ALL
- B. REPLACE_HTTP_REQ
- C. CORRUPT_HTTP_HEADER
- D. REPLACE
正解：D
解説：
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rewrite/rewrite-action-policy-examples/example-mask-http-server-type.html
質問 # 44
If a policy evaluates as_________________ a Citrix ADC performs the action assigned to the ____________ condition and stops further policy evaluation.
- A. UNDEFINED; FALSE
- B. TRUE; FALSE
- C. UNDEFINED; UNDEFINED
- D. UNDEFINED; TRUE
正解：A
質問 # 45
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that users have the certificate's private key.
- B. Ensure that users have the certificate's public key.
- C. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- D. Ensure that users have the server certificate installed.
正解：C
解説：
https://support.citrix.com/article/CTX101990
質問 # 46
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Add a second interface to each Citrix ADC VPX instance.
- B. Configure LACP on the SDX for management interface.
- C. Configure LACP on the SDX for the data interface.
- D. Configure a failover interface set on each Citrix ADC VPX instance.
正解：C
解説：
Reference:
241_Exam_Preparation_Guide_v01.pdf
質問 # 47
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Purchase another Citrix ADC MPX appliance.
- B. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
- C. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- D. Plug another 10G Citrix ADC port into the router.
正解：B
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/interfaces/configuring-link-aggregation.html
質問 # 48
In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the site persistence method.
What is used to source the traffic when the connection is proxied?
- A. LDNS IP Address
- B. Subnet IP (SNIP)
- C. Client source IP
- D. Virtual IP (VIP)
正解：C
質問 # 49
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE_ALL
- B. REPLACE_HTTP_REQ
- C. CORRUPT_HTTP_HEADER
- D. REPLACE
正解：D
解説：
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rewrite/rewrite-action-policy-examples/exampl
質問 # 50
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- B. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
- C. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- D. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
正解：C
質問 # 51
Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair. The administrator needs to ensure that one Citrix ADC is UP and primary at all times to guarantee that business websites are always available.
In the event that both nodes become unavailable or fail a health check, what does the administrator need to do to ensure that the Citrix ADCs still handle web traffic?
- A. Configure HA fail-safe mode on each Citrix ADC independently.
- B. Disable HA fail-safe mode on the primary Citrix ADC only.
- C. Configure HA fail-safe mode on the primary Citrix ADC only.
- D. Disable HA fail-safe mode on each Citrix ADC independently.
正解：A
質問 # 52
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Request threshold
- B. Persistence threshold
- C. Wait time
- D. Persistence time-Out
正解：D
質問 # 53
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
正解：A
解説：
Explanation
https://www.citrix.com/blogs/2014/12/29/netscaler-vlans-demystified/
https://support.citrix.com/article/CTX115575
質問 # 54
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Domain sharding
- B. Image shrink-to attributes
- C. Image lazy loading
- D. Image optimization
正解：D
解説：
Reduces the image to the size indicated in the image tag by Citrix ADC, enabling client browsers to load images faster. https://docs.citrix.com/en-us/citrix-adc/current-release/optimization/front-end-optimization.html
質問 # 55
......
問題集全額返金保証付き！1Y0-241問題公式問題集：https://jp.fast2test.com/1Y0-241-premium-file.html
厳密検証された1Y0-241試験問題集PDF[2024年最新] 時間限定無料アクセスFast2test：https://drive.google.com/open?id=1DrpSSoXaZa6Jkz_jM4fEkD5UWBq9ta5a