2024年最新のC_THR96_2305問題集を試そう！更新されたSAP試験合格させます
最新のC_THR96_2305試験問題集でSAP試験にはトレーニングを提供しています
質問 # 30
What document is created from the responses to the Data Questionnaire?
- A. Specification document
- B. Project Summary document
- C. Discrepancy Report document
- D. Metrics Pack document
正解：A
質問 # 31
Why would you use a complex fact table instead of a simple fact table? Note: There are 3 correct answers to this question.
- A. Source table records can be spliced across time.
- B. It provides full support to calculate hires, movements, and terminations.
- C. Source records can be reduced to one active fact record for any point in time.
- D. Tables can be sourced from a Lookup.
- E. It supports structural dimensions.
正解：A、B、C
質問 # 32
Consider the following scenario: A customer has asked to determine their Hires, Terminations, and Movement Events using the following Event codes: H - Hire P - Promotion D - Demotion X - Transfer T - Termination.
Promotions are only counted if there is an increase in the Salary Band and Demotions are only counted if there is a decrease in the Salary Band. What is the minimum number of Hire/Movement/Termination conditions that can be created to fulfill these requirements?
- A. 7: An Event List condition for each movement type. An Increase in Value for Promotions. A Decrease in Value for Demotions
- B. 5: An Event List condition for Hires, Internal Movements, and Terminations. An Event List and an Increase in Value for Promotions. An Event List and a Decrease in Value for Demotions
- C. 3: An Event List condition for Hires, Promotions, Demotions, Transfers, and Terminations. An Increase in Value for Promotions. A Decrease in Value for Demotions
- D. 5: An Event List condition for Hires, Transfers, and Terminations. An Event List and an Increase in Value for Promotions. An Event List and a Decrease in Value for Demotions
正解：B
質問 # 33
What happens when the Primary Person ID and Secondary Person ID Special Use Type properties are set on a single table?
- A. A mapping is created between an employee's identifier and the employee's assignment(s).
- B. A relationship is defined for a parent (primary)/child (secondary) relationship for a supervisor structure.
- C. A Lookup is created in the Lookup tab to join tables with Primary Person ID to a Secondary Person ID(s).
- D. A mapping is created between the Primary Person within a position and Secondary Person(s) within that position.
正解：C
質問 # 34
When using the Build Fact Data and Cube Command, the initial load fails with the following message in the log: InfoHRM.Girru.Components.InputProcessingException: Uncaught exception during input processing; Component=component "Parent Child Convertor Workforce __ Organizational Unit" (28) ---> System.Exception: Duplicate id generated as 3631545_3639040_UNK_DIV. Here is the parent and child path for duplication - { LEVEL_1_ID='3631545' LEVEL_1_NAME='ROMPETROL DOWNSTREAM' LEVEL_2_ID='3631545_3639040' LEVEL_2_NAME='Supply Chain'. Why do you get this error?
- A. The Data Factory has a database connection error.
- B. The Organizational Unit structure does NOT link to employee records.
- C. The Organizational Unit structure is unable to access the table.
- D. The Organizational Unit structure has nodes with duplicate IDs/paths that is NOT supported in the Data Factory.
正解：D
質問 # 35
Where can you access the configuration screens for SAP SuccessFactors Workforce Analytics OLAP cube on SAP HANA?
- A. SuccessFactors Admin
- B. WFA on HANA Data Factory
- C. WFA on HANA Admin
- D. Target Setting
正解：B
質問 # 36
What happens when you select a Standard Dimension when creating a new dimension? Note: There are 2 correct answers to this question.
- A. Label override configuration is provided.
- B. Initial dimension structure and dimension structure source are set.
- C. Standard labels are applied for internationalization.
- D. Nodes used in benchmarking are included.
正解：C、D
質問 # 37
Which measures are examples of a Base Input measure? Note: There are 2 correct answers to this question.
- A. Terminations
- B. Net Hire Ratio
- C. EOP Headcount
- D. Terminations-Voluntary
正解：A、C
質問 # 38
A customer wants to implement a Grade/Band dimension using the external code from the Fo Pay Grade T table. The source for all employee grade data is from the Pay Grade column in the Emp Job Info T table.
Which table and columns do you use as Lookup Table, Lookup Column, and Source Column when configuring the Lookup?
- A. Fo Pay Grade T as Lookup Table. Internal Code as Lookup Column. Emp Job Info T>Pay Grade as Source Column
- B. Fo Pay Grade T as Lookup Table. Code as Lookup Column. Emp Job Info T>Pay Grade as Source Column
- C. Emp Job Info T as Lookup Table. Pay Grade as Lookup Column. Fo Pay Grade T>Code as Source Column
- D. Emp Job Info T as Lookup Table. Pay Grade as Lookup Column. Fo Pay Grade T>Internal Code as Source Column
正解：A
質問 # 39
Consider the following scenario: EOP headcount has Age, Disability, EEO Job Category, Employment Level, and Employment Status dimensions turned on. SOP headcount has Age and EEO Job Category dimensions turned on. Average headcount has Gender and Future Leader dimensions turned on. Hires has Age, Disability, EEO Job Category, Employment Level, and Employment Status dimensions turned on. Terminations has Age, Disability, EEO Job Category, Employment Level, and Employment Status dimensions turned on. You are required to perform the following task: Turn on Age, Disability, EEO Job Category, Employment Level, Employment Status and Gender dimensions on for EOP Headcount, SOP Headcount, and Average Headcount.
How would you complete this task? Note: There are 2 correct answers to this question.
- A. Select each required dimension listed above and turn on the missing measures respectively.
- B. Select each measure listed above and turn on the missing dimensions respectively.
- C. Select EOP Headcount, SOP Headcount, and Average Headcount at the same time, then turn on the above dimensions in bulk.
- D. Select EOP Headcount and turn on the missing dimensions. Use the Mirror Dimension function to replicate dimensions to both SOP Headcount and Average Headcount.
正解：C、D
質問 # 40
What is the correct order of phases in the SAP SuccessFactors Workforce Analytics implementation timeline?
- A. Discover Prepare Realize Deploy
- B. Discover Explore Deploy Realize
- C. Prepare Explore Realize Deploy
- D. Prepare Explore Deploy Realize
正解：C
質問 # 41
Which of the following dimensions should NOT be turned on for Measure Terminations?
- A. Recruitment Source
- B. Separation Reasons
- C. Future Leader
- D. Gender
正解：B
質問 # 42
Which of the following functions are managed in the WFA on HANA Data Factory tool? Note: There are 3 correct answers to this question.
- A. Enable/disable measures and dimensions for the instance.
- B. Enable/disable incremental processing and frequency and start an out-of-cycle incremental build.
- C. Import/export the configuration for a backup or to use in another instance.
- D. Enable/disable role-based permissions for the instance.
- E. Import/export reports for a backup or to use in another instance.
正解：A、B
質問 # 43
What is a flat dimension structure type?
- A. A type of structure that requires all employees to link to the leaf nodes
- B. A type of structure that has each level ID and name sourced as columns from a SQL statement or table
- C. A type of structure that requires all leaf nodes to be at the same depth from the root of the dimension
- D. A type of structure that has all nodes on the first level
正解：B
質問 # 44
According to SAP best practices, at the start of the implementation project, which of the following documents are provided to the client? Note: There are 3 correct answers to this question.
- A. Project Summary document
- B. Metrics Pack document
- C. Specification document.
- D. Discrepancy Report document.
- E. Data Questionnaire document
正解：A、B、E
質問 # 45
What information is available on the Load Status screen? Note: There are 2 correct answers to this question.
- A. Filters (Type, Date, Status)
- B. Client list
- C. Load history
- D. Server load status
正解：A、C
質問 # 46
What block in SAP SuccessFactors Employee Central contains both the person-ID and the user-ID fields?
- A. Employment Information
- B. Person Information
- C. Job Information
- D. Biographical Information
正解：A
質問 # 47
What do you use a calculated column for in SAP SuccessFactors Workforce Analytics on SAP HANA?
- A. To add a level to the structure of a dimension
- B. To add additional logic to a base input measure or dimension
- C. To create custom measures
- D. To create aggregations (or pivots) in data
正解：B
質問 # 48
What field is the unique identifier for each record of data for a Metadata Framework (MDF) object?
- A. externalName
- B. externalCode
- C. effectiveStartDate
- D. Code
正解：B
質問 # 49
When using the Build Fact Data and Cube Command, the initial load fails with the following message in the log: Error: System.ArgumentException: Item has already been added. Key in dictionary:
'[location].[location].[level1_che_zznostateprovince_geneva]' Key being added:
'[location].[location].[level1_che_zznostateprovince_geneva]' at System.Collections.SortedList.Add(Object key, Object value) at System.Collections.SortedList.SyncSortedList.Add(Object key, Object value) at Hrml.DataObjects.HrmlOrgCubeDimensionTree.AddTreeNode(String path, String parentPath, Int32 depth, String caption) in. How do you fix the error?
- A. Ensure
- B. Convert all
- C. Make sure
- D. Exclude
正解：C
質問 # 50
How do you implement Promotion Out, Demotion Out, and Transfer Out metrics? Note: There are 3 correct answers to this question.
- A. Configure measure Movement In.
- B. Configure measure Movement Out.
- C. Map nodes into corresponding categories in the Recruitment Source dimension.
- D. Map nodes into corresponding categories in the Separation Reason dimension.
- E. Configure Event List and Hire, Movement, Terms
正解：A、B、C
質問 # 51
How can a technical consultant organize multiple records with the same Effective From Date into one Fact Table record?
- A. Use the To Date Special Use Type on a date field.
- B. Use a calculated column to filter unwanted records.
- C. Use the Effective Sequence Special Use Type on a numeric field.
- D. Use a calculated column called Effective Sequence.
正解：C
質問 # 52
What is included in a Fact table? Note: There are 2 correct answers to this question.
- A. Only the most recent data change
- B. Employee details
- C. IDs to link to dimension tables
- D. Hierarchy structure
正解：B、C
質問 # 53
......
更新されたテストエンジン練習C_THR96_2305問題集と練習試験：https://jp.fast2test.com/C_THR96_2305-premium-file.html