2024年最新のに更新されたのはHybrid-Cloud-Observability-Network-MonitoringテストエンジンとPDFで完全版無料問題集保証！
最新のSolarWinds Certified Professional Hybrid-Cloud-Observability-Network-Monitoring実際の無料試験問題
質問 # 31
Which two of the following advantages apply to choosing to resolve and store IPv4 hostnames immediately when a flow record is received? (Choose two.)
- A. flow views and widgets load faster
- B. database query times are decreased
- C. domain widgets and reports with DNS names run
- D. endpoint domain name is resolved when requested
正解：A、C
質問 # 32
When a parent object goes down or becomes unresponsive, all interfaces on the switch will also be unresponsive. Though they may be working, "unreachable" status is used because the parent node reports as
"down" and a status cannot be determined. Any alerts where the trigger condition includes node status equal to
"down" are not triggered.
In which section of SolarWinds' platform can an administrator configure the status of child objects as
"unreachable" instead of "down" or "unknown"?
- A. core thresholds
- B. polling settings
- C. manage dependencies
- D. node status participation
正解：C
質問 # 33
An existing NetPath probe is examined, and it is noted that the thickness of connection lines is different on various routes between devices. What does this indicate?
- A. The thicker line indicates the more likely path of traffic from source to destination.
- B. The probing interval for the probe is shorter on one path than on the other.
- C. The thicker line is monitored in hybrid cloud observability (HCO) and contains other metrics.
D Two probes with different probing intervals are monitoring the same path
正解：A
質問 # 34
It is noted that the hardware health monitoring for a Cisco switch is generating false positives. It is verified that the alerted hardware issues are not occurring. What is causing the issue?
- A. Hardware sensors were incorrectly assigned to another switch.
- B. MIB on the device is notthe preferred MIB that is beingpolled.
- C. Modify the widget thresholds to filter out the false positives.
- D. Restart SNMP on the device to refresh the hardware statistics.
正解：B
質問 # 35
Flow data is not generating from a device in the web console. Wireshark was used to confirm the flows are being sent from the device to the poller and not blocked by the firewall. Why is the data not showing in the web console?
- A. device is not monitored by hybrid cloud observability (HCO) features
- B. flow monitoring was not enabled as device type in web console settings
- C. missing source address field in flow configurations
- D. device is using IPv6 and HCO only supports IPv4
正解：C
質問 # 36
A new node has been added to hybrid cloud observability; however, certain data being polled on similar devices is not being polled on the new node. How can this be resolved?
- A. UDP must be re-created for new node
- B. assign existinguniversal device poller (UDP) to new node
- C. assign the new node to the same polling engine
- D. verily the credentials for the new node are valid
正解：B
質問 # 37
What can be done to show the description of an object ID (OID)?
- A. Perform an SNMPwalk on the tarqet device.
- B. Update the MIB database via SolarWinds support.
- C. Contact vendor to obtain the latest SNMPwalk.
- D. Download the latest OlD.cfq from customer portal.
正解：A
質問 # 38
Which two of the following authentication methods are supported when configuring a database log collection in hybrid cloud observability? (Choose two.)
- A. Windows
- B. Kerberos
- C. oAUTH
- D. mixed mode
正解：A、B
質問 # 39
A device studio poller is being built for a router statistic. It is determined that its object ID (OID) does not exist in SolarWinds' MIB database. What is the best workaround for this situation?
- A. select SNMP and ICMP as the router's polling method
- B. select manually define object identifier and specify SNMP
- C. consult vendor and add OID to the database
- D. download database from customer portal
正解：B
質問 # 40
Which additional polling method is needed after adding an F5 load balancing node for SNMP monitoring?
- A. WM1
- B. CLI
- C. API
- D. iControl
正解：D
質問 # 41
Which two of the following processing policies are processed independently and at the same time? (Choose two.)
- A. svslog
- B. global post
- C. global pre
- D. traps
正解：A、D
質問 # 42
A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)
- A. Verify a pingresponsefor this node is received through the ICMP.
- B. Ping device from assigned polling engine.
- C. Verify the appropriate polling method is set for this node.
- D. Run SNMP walk on the appropriate node.
正解：A、B、C
質問 # 43
It is taking longer than normal for a single mission critical node to poll for data. Where would the polling interval for the node be changed?
- A. Settings > All Setting > Core Thresholds
- B. Settings > All Settings > Polling Settings
- C. Node Details Summary > Resources > Memory
- D. Node Details Summary > Edit Node > Polling
正解：D
質問 # 44
The status of the interfaces for a network switch shows as "unknown" in SolarWinds' platform web console, although the node status is "up". What could be the reason?
- A. hardware sensors are disabled on the node
- B. interfaces are not managed in hybrid cloud observability (HCO)
- C. ICMP is blocked between the node and the polling engine
- D. interface details have changed on the device
正解：D
質問 # 45
An unknown traffic event is noted in the web console. What is the likely cause?
- A. missing a byte group from flow field configurations
- B. incorrectly configured source or destination port in the flows
- C. a firewall is blocking the traffic flow configurations
- D. receiving flows from a device not monitored by the network
正解：D
質問 # 46
When creating a new rule action, what is the best option to enable if too many events trigger the rule within a short time?
- A. flood protection
- B. entry count
- C. time window
- D. excessive event
正解：A
質問 # 47
Some of the flows received are mapping to an IP address that does not match any of the nodes being monitored. It has been verified that all flow sources are also being monitored by NPM and SNMP polling. The known source nodes for these flows have the correct IP address. What could be causing this issue?
- A. IP address for the node is incorrect in SNMP polling but correct in the flows
- B. source machine field in the flows is not configured and the setting to match the node by another IP is turned off
- C. flows are coming from a non-primary address and the setting to match the node by another IP is turned off
- D. flows are IPv6 and the network monitoring does not recognize that version
正解：C
質問 # 48
Which two of the following technologies are used when building device studio pollers? (Choose two.)
- A. CPU and memory load of single processor
- B. VLAN and VRF on a dedicated widget
- C. power supply status for vital statistics view
- D. machine type for node details widget
正解：C、D
質問 # 49
Which custom poller supports interface traffic, UPS battery status, and CPU temperature?
- A. hardware health
- B. device studio
- C. visualization integration
- D. universal device poller
正解：D
質問 # 50
......
Hybrid-Cloud-Observability-Network-Monitoring問題集には更新された練習テストと153独特な問題：https://jp.fast2test.com/Hybrid-Cloud-Observability-Network-Monitoring-premium-file.html
最新の100%試験合格率爆上がり Hybrid-Cloud-Observability-Network-Monitoring問題集PDF：https://drive.google.com/open?id=1sm4DT_3BoEu7yQGMORF_hV42c62IjY6S