[2024年更新]合格できるIBM S1000-007プレミアム資料テストエンジンPDFの無料問題集お試しセット
2024年最新のリアルS1000-007問題集テストエンジン試験問題はここにある
IBM S1000-007認定試験は、IBM AIX V7オペレーティングシステムの管理を専門とする専門家向けに設計されています。この認定試験は、管理者がAIX V7システムの管理に関する専門知識を実証し、スキルの認識を得るための優れた方法です。 IBM S1000-007試験に合格することは、IBM認定スペシャリスト-AIX V7 Administrator認定を取得するための前提条件でもあります。
IBM S1000-007認定試験は、IBM AIX v7管理に特化したITプロフェッショナルにとって優れた資格です。準備には労力が必要ですが、その価値はあると言えます。世界的に認められた資格であり、ITプロフェッショナルが求職者市場で差別化し、キャリアを進めるのに役立ちます。
質問 # 21
The administrator of an AIX NIM client system has accidentally removed the /etc/niminfo file. Which method is used to rebuild the /etc/niminfo file?
- A. Use the nimclient command to restore the /etc/niminfo file from the most recent mksysb backup image.
- B. Use the rep command on the AIX client system to copy the /etc/niminfo file from the NIM master.
- C. Use the nimclient command on the AIX client system to rebuild the /etc/niminfo file.
- D. Use the niminit command on the AIX client system to rebuild the /etc/niminfo file.
正解：D
解説：
The niminit command can be used to rebuild the /etc/niminfo file on an AIX NIM client system if it has been accidentally deleted. This command will read the NIM database on the NIM master and generate the /etc/niminfo file accordingly. Reference: IBM AIX v7 Administrator Specialty Study Guide.
質問 # 22
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. By default, it will check there is enough space where the data is to be stored.
- C. The data must be stored in /tmp.
- D. All options are enabled by default.
正解：B
解説：
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.
質問 # 23
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
- B. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- C. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
- D. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
正解：A
質問 # 24
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mJcvdev
- B. mkrep
- C. oem_setup_env
- D. mlcvterm
正解：D
質問 # 25
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. read-write permissions
- B. no permissions
- C. write-only permissions
- D. read-only permissions
正解：D
質問 # 26
Which logical volume Mirror Write Consistency policy should an AIX V7.2 administrator use to achieve the data consistency between mirrors?
- A. active
- B. off
- C. round robin
- D. superstrict
正解：A
質問 # 27
What AIX feature will allow data to be mirrored to a remote site?
- A. Remote Volume Groups
- B. Asynchronous Dispersed Logical Volumes
- C. Geographic Logical Volume Manager
- D. Mirror Pools
正解：C
質問 # 28
An administrator wants to check which system tunables have been changed in the system since last boot. Which procedure provides the information needed?
- A. Run tunsave -f ./currentconfig; more ./currentconfig.
- B. Run the no, ioo and scftedo commands with the -cf flag.
- C. Run lstuncfg -1 I grep -v DEFAULT.
- D. View the /etc/tunables/currentconfig file and search for change marks in the file.
正解：C
解説：
The procedure to check which system tunables have been changed in the system since last boot is to run the 'lstuncfg -1 | grep -v DEFAULT' command. The lstuncfg command is used to display the current configuration of the system tunables. By using the '-1' option, the command will display the system tunables and whether they have been changed since the last system reboot. The 'grep -v DEFAULT' command will filter out the default values, allowing you to see only the tunables that have been changed. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/lstuncfg.htm.
質問 # 29
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. lppchk: -L -F "fileset level" I grep -v "7200-04"
- B. lslpp -s -1 7200-04
- C. oslevel -r -1 7200-04
- D. instfix -i I grep -v 7200-04
正解：C
解説：
This command will list all filesets that are below the AIX V7.2 technology level 4. The oslevel command is a useful tool for AIX administrators, as it allows them to list the installed technology levels and filesets. Other commands such as lslpp, lppchk, and instfix are not applicable to this task and will not provide the desired information.
For more information on the oslevel command, please refer to the IBM AIX v7 Administrator Specialty Study Guide, page 12-15. The guide can be found here: https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/os_upgrade/oslevel_command.htm.
質問 # 30
Which file starts the System Resource Controller?
- A. /etc/rc.local
- B. /etc/rc.d/rc.2
- C. /etc/rc.srcmstr
- D. /etc/inittab
正解：C
解説：
The System Resource Controller (SRC) is the main process that starts other background processes when the system boots. It is started through the /etc/rc.srcmstr script which is run by the init process. This script reads the /etc/inittab file and starts the necessary processes. Reference: IBM AIX v7 Administrator Specialty Study Guide.
質問 # 31
What are three states a device can have when connected to an AIX system?
- A. Suspended
- B. Available
- C. Blocked
- D. Stopped
- E. Defined
- F. Running
正解：B、D、E
解説：
Explanation
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining adevice in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
質問 # 32
The lspv and Iquerypv commands show a different PVID for an hdisk. How is this possible?
- A. lspv shows the contents of the ODM.
- B. The system has the wrong version of the lspv command installed.
- C. lspv is incorrectly hashing the UDID of the disk.
- D. lspv is querying a disk at a different location.
正解：B
質問 # 33
When attempting to recover a corrupted file system an administrator runs the command fsck against the unmounted file system and receives the following error:
After confirming that the file system is not mounted, what should the administrator do next?
- A. Run logform /dev/u1v11.
- B. Convert the log to INLINE.
- C. Run fsck: with the -F (force) flag.
- D. Run logrcvr /dev/ulv14 .
正解：C
解説：
When attempting to recover a corrupted file system, the administrator should first confirm that the file system is not mounted. If the file system is not mounted, then the administrator should run the fsck command with the -F (force) flag. This will force the fsck command to check the file system for errors and attempt to fix them. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 8-23).
質問 # 34
Which two additional commands should an AIX V7.2 administrator run after mirroring the rootvg with mirrorvg command?
- A. synclvodro
- B. varyonvg
- C. reboot
- D. bootlist
- E. bosboot
正解：D、E
解説：
The two additional commands that an AIX V7.2 administrator should run after mirroring the rootvg with the mirrorvg command are 'bosboot' and 'bootlist'. The bosboot command is used to update the boot image on all disks in the volume group, and the bootlist command is used to set the boot order for the system. These commands are available on IBM AIX v7 systems and are documented in the IBM AIX v7 Administrator Specialty Study Guide. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/bosboot.htm and https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/bootlist.htm.
質問 # 35
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. yum
- B. installp
- C. rpm
- D. dpkg
正解：B
解説：
Installp is a command-line package management tool that is used in the AIX operating system to install, remove, and manage software packages. It simplifies the installation of RPM packages by automatically resolving any prerequisite dependencies and installing them before the main RPM package. This ensures that any prerequisites are installed and configured correctly before the main package is installed, reducing the time it takes to resolve installation issues. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
質問 # 36
......
最新オフィシャル資料はS1000-007認証されたS1000-007問題集PDF：https://jp.fast2test.com/S1000-007-premium-file.html
最新推薦するS1000-007問題集はIBM Certification認証された：https://drive.google.com/open?id=1h-lKgg3lFjBw-D7dCMgnS8yrRV9GufXx