ガイド（2024年最新）実際のIBM S1000-007試験問題
S1000-007試験問題集合格させるのは更新されたのは2024年年最新の認証済み試験問題
IBM S1000-007（IBM AIX v7管理者専門）認定試験は、経験豊富なAIX v7管理者が彼らのスキルと知識を検証し、ITのこの特定の領域に特化するための優れた方法です。これは、AIX v7アーキテクチャと管理に深い理解が必要であり、その知識を実践的な状況に適用できる能力が必要な包括的な試験です。
IBM S1000-007試験は、経験豊富なAIX管理者を対象とした上級レベルの認定試験です。試験はAIXのインストールと設定、システム管理、ストレージ管理、ネットワーク管理、セキュリティ、トラブルシューティングなど、幅広いトピックをカバーしています。試験は62問の多肢選択問題から構成され、受験者は120分間で試験を受けることができます。試験に合格するには、少なくとも64％のスコアを達成する必要があります。
質問 # 15
Which two additional commands should an AIX V7.2 administrator run after mirroring the rootvg with mirrorvgcommand?
- A. bootlist
- B. varyonvg
- C. synclvodro
- D. reboot
- E. bosboot
正解：A、E
質問 # 16
A system administrator has noticed that static routes are missing after rebooting a system. What is the most likely reason for this?
- A. The administrator has failed to run the cfgmgr command before rebooting the systems.
- B. The administrator has failed to configure the routes in the inet0 device with the chdev command.
- C. The administrator has failed to configure the routes with the route add command.
- D. The administrator has failed to configure the routes in the lo0 device with the chdev command.
正解：B
質問 # 17
A SAN administrator increased the size of a LUN device (hdisk) that is being used by a AIX LPAR. However, the system administrator does not see the new size using the lsvg or Ispv commands.
Which command updates the system with the new size?
- A. cfgmgr
- B. chvg -g
- C. extendpv
- D. synclvodm
正解：A
解説：
The cfgmgr command updates the system configuration database with the current configuration of the devices attached to the system. When the SAN administrator increases the size of a LUN device (hdisk), it is not automatically reflected on the AIX LPAR. Running the cfgmgr command updates the system with the new size information and makes it visible to the system administrator.
質問 # 18
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. A slow NFS mount for their home directory.
- B. Network issues between the user location and the system.
- C. The PATH variable contains non-existent directories.
- D. The user's home file system is full.
正解：D
質問 # 19
An administrator is tasked with installing an open source package. They are told to use the IBM AIX Toolbox for Linux Applications because the organization wants to be able to open tickets with IBM support.
What should the administrator tell the requester?
- A. IBM offers standard support for open source software that is licensed with the operating system.
- B. IBM offers extended support for open source software that is licensed with the hardware.
- C. IBM offers this open source software as-is.
- D. IBM offers extended support for open source software and they need to verify entitlement.
正解：D
質問 # 20
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. yum
- B. dpkg
- C. installp
- D. rpm
正解：C
解説：
Installp is a command-line package management tool that is used in the AIX operating system to install, remove, and manage software packages. It simplifies the installation of RPM packages by automatically resolving any prerequisite dependencies and installing them before the main RPM package. This ensures that any prerequisites are installed and configured correctly before the main package is installed, reducing the time it takes to resolve installation issues. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
質問 # 21
When the system boots it stops and displays reference code 551. This reference code means the rootvg will not varyon. What is the best way for the administrator to proceed?
- A. Perform a debug boot of AIX and diagnose/fix the problem.
- B. Restart the system.
- C. Reinstall AIX or restore from a mksysb.
- D. Perform a maintenance mode boot of AIX and diagnose/fix the problem.
正解：D
質問 # 22
While trying to extend a file system named /work an administrator receives the following error. 0516-787 extendlv: Maximum allocation for logical volume fslv00 is 256.
What must be done to allow the file system to be extended?
- A. Increase the setting for maximum number of logical partitions for that logical volume.
- B. Change the logical volume type to jfs2 as JFS logical volumes cannot extend past 256.
- C. Change the file system's maximum capacity.
- D. Increase the volume group's maximum limit of logical partitions per logical volume.
正解：A
解説：
This error indicates that the maximum number of logical partitions for the logical volume is set to 256 and needs to be increased in order to allow the file system to be extended. From the IBM AIX v7 Administrator Specialty Study Guide: "The 0516-787 error indicates that the maximum number of logical partitions for the logical volume is set to 256, and needs to be increased in order to allow the file system to be extended."
質問 # 23
An AIX administrator installed the fileset named useful_fileset. How can they determine which files are included in the fileset?
- A. lppchk -f useful fileset
- B. rpm -qf useful_fileset
- C. file -f useful__fileset
- D. lslpp -f useful_fileset
正解：D
解説：
The "lslpp" command can be used to display information about filesets installed on an AIX system. To determine which files are included in the "useful_fileset" fileset, the administrator can run the following command:
lslpp -f useful_fileset
This command will display detailed information about the "useful_fileset" fileset, including a list of the files that are included in the fileset. This information can be useful for verifying the installation of the fileset and for troubleshooting problems that may be related to the fileset.
質問 # 24
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. All options are enabled by default.
- C. By default, it will check there is enough space where the data is to be stored.
- D. The data must be stored in /tmp.
正解：A
質問 # 25
The lspv and Iquerypv commands show a different PVID for an hdisk. How is this possible?
- A. lspv is querying a disk at a different location.
- B. The system has the wrong version of the lspv command installed.
- C. lspv shows the contents of the ODM.
- D. lspv is incorrectly hashing the UDID of the disk.
正解：B
質問 # 26
When attempting to recover a corrupted file system an administrator runs the command fsckagainst the unmounted file system and receives the following error:
After confirming that the file system is not mounted, what should the administrator do next?
- A. Convert the log to INLINE.
- B. Run fsck: with the -F (force) flag.
- C. Run logform /dev/u1v11.
- D. Run logrcvr /dev/ulv14 .
正解：C
質問 # 27
A system administrator includes the values RES TIMEOUT=1 and RES_RETRY=1 in the /etc/environment file. What is the effect of this change?
- A. It reduces the failover time to the secondary name server when the first name server is not reachable.
- B. It reduces the failover time to the secondary NTP Server when the first NTP Server is unavailable.
- C. It avoids NFS mounts appearing to be hung or stalled indefinitely when there are network outages.
- D. It causes ssh connections to disconnect after 1 minute of no activity.
正解：C
質問 # 28
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. oem_setup_env
- B. mkrep
- C. mlcvterm
- D. mJcvdev
正解：D
質問 # 29
An AIX system is defined as a NIM client with -a connect=shell. The client system is up and running. The client can ping the NIM master, and the master can ping the client. The administrator of the NIM master system attempts to use NIM to install software updates on the NIM client, but receives the error message Permission denied.
What can the administrator of the AIX NIM client do to help resolve the problem?
- A. Edit the /etc/services file to check the port number used for the nimreg service, then refresh inetd.
- B. Check the firewall configuration and open port 1066 if required.
- C. Flush the arp cache and then reboot the client system to ensure the network route table is correct.
- D. Check that the root user's .rhosts file has an entry for the NIM master, and that the file permissions are
600.
正解：A
質問 # 30
A customer runs smit on the AIX command line and receives the message below:
1800-005 SMIT requires a minimum of 24 line by 80 column output display.
What can be done to resolve the error?
- A. Change their DISPLAY environment variable.
- B. Set the TERM variable to smit.
- C. Resize their window.
- D. Make sure they are running as the root user.
正解：C
解説：
The root user is not required to run SMIT, and the size of the window is the only factor that determines the minimum output display requirements. According to the IBM AIX v7 Administrator Specialty Study Guide (page 9-3), SMIT requires 24 lines and 80 columns for the output display for successful execution.
質問 # 31
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?
- A. mklv
- B. swapon
- C. chps
- D. mkps
正解：C
質問 # 32
......
IBM S1000-007 (IBM AIX v7 Administrator Specialty) 試験は、IT専門家が IBM AIX v7 オペレーティングシステムの管理に関する知識とスキルをテストするために設計された認定試験です。この試験は、AIX v7 システムのインストール、設定、管理における専門知識を証明したい専門家を対象としています。この試験は、60の多肢選択問題で構成され、候補者は90分で試験を完了する必要があります。
合格させる保証付き無料クイズ2024年最新の実際に出ると確認されたIBM：https://jp.fast2test.com/S1000-007-premium-file.html
S1000-007試験問題でリアルに更新された問題PDF：https://drive.google.com/open?id=1h-lKgg3lFjBw-D7dCMgnS8yrRV9GufXx