[2023年11月20日]JN0-363練習試験問題集で試験99%合格率があります [Q132-Q150]

[2023年11月20日]JN0-363練習試験問題集で試験99%合格率があります

最新の検証済みJN0-363問題と解答、合格保証もしくは全額返金

Juniper JN0-363試験は、サービスプロバイダーのルーティングと切り替えに焦点を当てた専門レベルの認定試験です。この試験は、Juniper Networks Service Providerのルーティングとスイッチングプラットフォームの設計、構成、およびトラブルシューティングのスキルを向上させたいネットワーキング専門家向けに設計されています。 JN0-363試験は、サービスプロバイダーネットワークを専門とするネットワーキング専門家にとって最も求められている認定の1つです。

Juniper JN0-363認定試験は、サービスプロバイダーのルーティングと切り替えでキャリアを進めようとしている専門家にとって貴重な資格です。この認定は、候補者がサービスプロバイダーネットワークで使用される技術と機器を強く理解しており、この知識をこれらのネットワークの設計と維持に適用できることを示しています。

質問 # 132
Click the Exhibit.

You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)

A. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
B. Remove the existing 192.168.2.0/30 static route.
C. Set the GRE interface with a larger TTL value.
D. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.

正解：A、B

質問 # 133
Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring to the exhibit, which router will be elected as the primary VRRP router?

A. R2
B. R3
C. R1
D. R4

正解：C

質問 # 134
Which new field is added to an IPv6 header as compared lo IPv4?

A. version
B. checksum
C. fragment offset
D. flow label

正解：D

質問 # 135
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

A. path MTU discovery
B. end-to-end MTU discovery
C. packet throughput discovery
D. fragmentation discovery

正解：A

質問 # 136
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)

A. show route protocol bgp hidden
B. show route receive-protocol bgp 192.168.1.1
C. show route bgp
D. show route advertising-protocol bgp 192.168.1.1

正解：A、B

質問 # 137
You are deploying link aggregation groups.

A. By default, what are two considerations in this scenario? (Choose two.)
B. All the ports must have the same speed.
C. Member links are required to be contiguous ports.
D. Member links can reside on different members within an MC-LAG.
E. There should only be four member links per LAG.

正解：C、E

質問 # 138
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

A. R2 is an ABR
B. R1 is an ABR
C. R2 is an ASBR
D. R1 is a backbone router

正解：A

質問 # 139
Click the Exhibit button.

Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?

A. The GRE header adds 24 bytes to the packet
B. The GRE header adds 20 bytes to the packet
C. The IP header adds 24 bytes to the packet
D. The IP header adds 20 bytes to the packet

正解：A

質問 # 140
Click the Exhibit button.

You are asked to configure OSPF for the network?
Referring to the exhibit, how should Area 1 be configured?

A. not-so-stubby area
B. totally stubby area
C. stub area
D. backbone area

正解：C

解説：
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html

質問 # 141
Click the Exhibit button. From the output shown in the exhibit, what would happen to a packet destined for address 172.29.3.5?

A. The address is in the aggregate range; the packet will be dropped.
B. The address is not in the aggregate range; the packet is sent to the Routing Engine.
C. The address is in the aggregate range; the packet will be silently dropped.
D. The address is not in the aggregate range; the packet will be forwarded.

正解：A

質問 # 142
Click the Exhibit button.

Referring to the exhibit, which statement is true?

A. The router will precalculate a valid path through the network for LSP r1-to-r3
B. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
C. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
D. The router will analyze the traffic engineering database to determine the best path through the network

正解：B

質問 # 143
Click the exhibit.

You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?

A. Router is not receiving hellos on the configured interface.
B. The router is not sending hellos on the configured interface.
C. The OSPF version does not match on the configured interfaces.
D. The area does not match on the configured interfaces.

正解：D

質問 # 144
Click the Exhibit.

The router with the configuration shown in the exhibit has two interfaces, both of which are operational and can pass traffic. These interfaces are connected to two different routers, both of which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic into the backbone area.
Which two statements are correct? (Choose two.)

A. The router is an ASBR.
B. The router has only a single OSPF adjacency.
C. The router has two OSPF adjacencies.
D. The router is an ABR.

正解：B、D

質問 # 145
Click the exhibit.

A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

A. 0
B. 1
C. 2
D. 3

正解：A、D

質問 # 146
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?

A. The router with the highest numerical lo0 IP address will be elected as the DIS.
B. The router with the highest MAC address will be elected as the DIS.
C. The router with the lowest MAC address will be elected as the DIS.
D. The router with the lowest numerical lo0 IP address will be elected as the DIS.

正解：A

解説：
Explanation/Reference:

質問 # 147
Click the Exhibit button.

Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?

A. 1600 ms
B. 900 ms
C. 1200 ms
D. 2400 ms

正解：C

質問 # 148
Exhibit

You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?

A. On R2, change the local preference value to 50.
B. On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to ISP 1.
C. On R1, change the local preference value to 250.
D. On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to ISP 2.

正解：C

質問 # 149
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)