[2023年10月29日] 無料Juniper JN0-363試験問題と解答
検証済みJN0-363問題集と解答は最新JN0-363をダウンロード
JNCIS-SP認定の対象となるには、候補者は、ネットワーキングとOSIモデル、およびJunos OSの実用的な知識を基本的に理解する必要があります。また、サービスプロバイダーのルーティングおよびスイッチングテクノロジーを扱う経験があり、BGP、OSPF、IS-ISなどのプロトコルに精通している必要があります。
質問 # 11
Click the Exhibit button.
You have applied the policy shown in the exhibit to the forwarding table on an MX Series device.
How is traffic load-balanced?
- A. per packet
- B. per flow
- C. per segment
- D. per frame
正解：A
質問 # 12
Click the Exhibit button. An interface is configured as shown in the exhibit. What must also be configured for this interface to participate in VLAN 100 and 200?
- A. VLANs
- B. bridge domains
- C. broadcast domains
- D. encapsulation type
正解：B
質問 # 13
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than the default local preference
- B. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- C. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
- D. Routes from 10.3.3.3 are more preferred than the default local preference
正解：D
質問 # 14
You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
- A. graceful Routing Engine switchover
- B. Virtual Router Redundancy Protocol
- C. IP anycast
- D. graceful restart
正解：A
解説：
https://www.juniper.net/documentation/en_US/junos/topics/concept/nsr-overview.html
質問 # 15
Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?
- A. Configure a static route for Interface ge-0/0/0.0.
- B. Create a generated route for Interface ge-0/0/0.0.
- C. Remove interface ge-0/0/0.0 from OSPF.
- D. Add ge-0/0/0.0 as a passive interface In OSPF.
正解：A
質問 # 16
Which two statements are true when configuring OSPF authentication? (Choose two.)
- A. If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup.
- B. An OSPF link can support both simple password and MD5 authentication at the same time.
- C. An MD5 password requires a key ID.
- D. You can configure multiple MD5 passwords simultaneously on the same link.
正解：C、D
質問 # 17
Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)
- A. You should configure the max period for NSR precision timers.
- B. You must configure GRES.
- C. You must configure graceful restart.
- D. You should configure commit synchronization.
正解：A、B
質問 # 18
Click the Exhibit.
Referring to the configuration in the exhibit, which statement is true?
- A. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.
- B. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
- C. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- D. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
正解：A
質問 # 19
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The local-address statement is not required for the BGP session to establish correctly
- C. The configuration is for an external BGP session
- D. The configuration is for an internal BGP session
正解：A、D
解説：
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/local-address-edit-protocols-bgp.html
質問 # 20
Click the Exhibit.
Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?
- A. 100.0.1/32 and 100.0.20.1/32
- B. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
- C. 100.0.20.1/32
- D. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
正解：D
質問 # 21
Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
- A. Route 1
- B. Route 2
- C. Route 4
- D. Route 3
正解：D
質問 # 22
Click the exhibit.
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
- A. Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
- B. Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
- C. Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
- D. Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
正解：C
質問 # 23
Which configuration selling prohibits a static route from being redistributed by a dynamic routing protocol?
- A. no-readvertise
- B. qualified-next-hop
- C. passive
- D. route-filter
正解：A
質問 # 24
Click the Exhibit.
Your network consists of subnets shown in the exhibit. You are asked to create an aggregate route for Router 1.
What is the appropriate prefix for the aggregate route in this scenario?
- A. 172.42.32.0/22
- B. 172.42.32.0/19
- C. 172.42.32.0/20
- D. 172.42.32.0/21
正解：B
質問 # 25
Click the Exhibit.
You have just configured IS-IS, but the adjacency is not coming up.
Referring to the exhibit, what is the cause?
- A. The routers must be in different areas.
- B. The family iso parameters is missing on the interfaces.
- C. One router is configured for Level 2 only.
- D. Only one side is configured using the point-to-point parameter.
正解：D
質問 # 26
Referring to the exhibit, what will happen to untagged frames?
- A. The untagged frames are associated with VLAN 20.
- B. The untagged frames are associated with VLAN 10.
- C. The untagged frames are dropped.
- D. The untagged frames are load balanced between VLAN 10 and VLAN 20.
正解：C
質問 # 27
Which packet type does the router use to request up-to-date link-state information?
- A. IIH
- B. PSNP
- C. CSNP
- D. LSP
正解：B
質問 # 28
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?
- A. Type 5 LSAs would be blocked in a stub area.
- B. Type 5 LSAs would be converted to type 7 LSAs.
- C. Type 5 LSAs would be seen only in the newly attached area.
- D. Type 5 LSAs would carry external information across your transit area to the backbone.
正解：A
質問 # 29
What are three ways to configure IPv6 addresses in your network? (Choose three.)
- A. Configure your IPv6 addresses by setting up a DHCPv6 server.
- B. Statically configure your IPv6 addresses.
- C. Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.
- D. Configure your IPv6 addresses using stateless auto configuration.
- E. Configure your IPv6 addresses by assigning your router a prefix list.
正解：A、B、D
質問 # 30
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an import policy to the internal BGP peers.
- B. Apply the next-hop-self as an export policy to the internal BGP peers.
- C. Apply the next-hop-self as an export policy to the external BGP peers.
- D. Apply the next-hop-self as an import policy to the external BGP peers.
正解：B
質問 # 31
......
サービスプロバイダールーティングおよびスイッチングスペシャリスト（JNCIS-SP）認定試験としても知られるJuniper JN0-363は、サービスプロバイダーのルーティングと切り替え技術のスキルと知識を検証しようとする専門家向けに設計された認定プログラムです。この認定は、ネットワークエンジニア、サポート担当者、およびサービスプロバイダー環境で働く他のIT専門家に特に関連しています。
リアル問題集を使おう 100%無料JN0-363試験問題集：https://jp.fast2test.com/JN0-363-premium-file.html
更新された100%カバー率リアルJN0-363試験問題で100%合格保証：https://drive.google.com/open?id=1UlBNu6Ok9yLbKS87-PFGNA335XoNNaP4