[2023年07月04日] 無料ダウンロードCisco 500-220リアル試験問題
あなたを合格させる試験には100%確認済み500-220試験問題
Cisco 500-220の認定試験は、エンジニアリングCisco Merakiソリューションとしても知られており、候補者のCisco Merakiソリューションの展開、設定、および管理に関する知識とスキルをテストするように設計されています。この試験は、Merakiデバイスを使用し、Cisco Merakiソリューションの技術、機能、および機能を理解したい個人を対象としています。この認定は、ネットワーキングおよびクラウドベースのテクノロジーでキャリアの可能性を向上させたいITプロフェッショナルにとって貴重な資格です。
シスコ500-220認証を取得することは、候補者がシスコMerakiソリューションを効果的に設計および実装できる知識とスキルを持っていることを示しています。この認証は、候補者が複雑なネットワークソリューションを設計および展開できることを示すため、雇用主に高く評価されています。また、この認証は、候補者の専門的な成長に対する取り組みを示すため、IT業界で高く評価されています。
Cisco 500-220試験の準備には、Cisco Merakiソリューションスペシャリストトレーニングコースを受講することができます。このコースでは、試験に含まれるすべてのトピックをカバーし、Cisco Merakiソリューションの展開と管理に関する実践的な経験を提供します。また、学習ガイドや練習問題集を使用して試験に備えることもできます。
質問 # 29
How is high-availability supported for Cisco Meraki devices?
- A. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
- B. Only the MX Security Appliances that use VRRP support high availability.
- C. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- D. An active/active high-availability pair is recommended for MX Security Appliances.
正解：B
解説：
Reference:
_High_Availability_Pair
質問 # 30
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. enabling maximum retention limit
- B. enabling motion-based retention
- C. enabling audio compression
- D. installing an SSD memory extension
- E. configuring a recording schedule
正解：B、E
質問 # 31
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs immediately stop functioning.
- B. One AP Immediately stops functioning.
- C. All APs stop functioning in 30 days.
- D. All network devices stop functioning in 30 days.
正解：D
質問 # 32
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. expired device license
- B. more hardware devices than device licenses
- C. MR licenses that do not match the MR models in the organization
- D. licenses that are in the wrong network
- E. licenses that do not match the serial numbers in the organization
正解：A、B
質問 # 33
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
- A. Firewall & traffic shaping
- B. Simultaneous logins
- C. Controller disconnection behavior
- D. Captive Portal strength
- E. RADIUS for splash page settings
正解：C、D
質問 # 34
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs IDS/IPS for inter-VLAN traffic.
- B. The MX appliance performs data encryption for inter-VLAN traffic.
- C. The MX appliance performs content filtering for inter-VLAN traffic.
- D. The MX appliance performs AMP for inter-VLAN traffic.
正解：B
質問 # 35
Refer to the exhibit.
The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
- A. Add a deny any/any firewall rule to the end of the firewall rules.
- B. Remove the connection from Internet 1.
- C. Physically disconnect all LAN ports.
- D. Configure the MX appliance to Routed mode on the Addressing & VLANS page.
正解：C
質問 # 36
What is a feature of distributed Layer 3 roaming?
- A. All wireless client traffic can be split-tunneled.
- B. An MX Security Appliance is required as a concentrator.
- C. An MX Security Appliance is not required as a concentrator.
- D. All wireless client traffic is tunneled.
正解：C
解説：
Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices
質問 # 37
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. GET
- B. PATCH
- C. ADD
- D. PUT
- E. SET
- F. POST
正解：A、D、F
解説：
Reference:
Cisco_Meraki_Dashboard_API
質問 # 38
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- B. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- C. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- D. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- E. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
正解：A、D
解説：
Reference:
Organization_Menu/Manage_Tags
質問 # 39
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The configuration change in the bound network overrides the template configuration.
- B. The template configuration overrides the configuration change in the bound network.
- C. The configuration change in the bound network is combined with the template configuration inside the template.
- D. The more restrictive configuration is preferred.
正解：C
解説：
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
質問 # 40
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. area or interest
- B. sensor crop
- C. privacy window
- D. restricted mode
- E. zone exclusion
正解：D
質問 # 41
Where should a network admin navigate to investigate wireless mesh information between Meraki APs?
- A. Wireless > Configure > Radio Settings
- B. Wireless > Monitor > Wireless Health
- C. Wireless > Monitor > RF Spectrum
- D. Wireless > Monitor > Access Points > AP > RF
正解：D
質問 # 42
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. quarantine
- B. blocking
- C. prevention
- D. detection
正解：C
質問 # 43
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
- A. Meraki Insight
- B. MR Access Point
- C. MV Smart Camera
- D. MS Switch
正解：B
質問 # 44
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device tries to form a connection with a local backup sever.
- B. The offline device reboots every 5 minutes until connection is restored.
- C. The offline device stops passing traffic.
- D. The offline device continues to run with its last known configuration until cloud connectivity is restored.
正解：A
質問 # 45
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?
- A. The "Meraki management" profile cannot be removed.
- B. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
- D. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.
正解：C
質問 # 46
Which information is used to calculate whether a WAN link has high usage?
- A. total historical throughput of an uplink
- B. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
- C. total number of devices that are actively passing traffic
- D. data under Security & SD WAN > Appliance Status > Uplink > Live Data
正解：B
質問 # 47
......
500-220問題集100パー合格保証には最新のサンプル：https://jp.fast2test.com/500-220-premium-file.html
500-220問題PDFで500-220リアル試験問題解答：https://drive.google.com/open?id=1M0lwagUXCr3rHAadUpKoGb7Zr6rZIgK8