[2023年06月05日] 実際のDES-1241試験問題集は2023年最新のEMC練習試験合格させます [Q45-Q70]

Share

[2023年06月05日] 実際のDES-1241試験問題集は2023年最新のEMC練習試験合格させます

2023年最新の実際にあるDES-1241問題集テストエンジン試験問題はここにある


EMC DES-1241 認定は、PowerStore プラットフォームエンジニアリングにおける専門知識を証明したい IT プロフェッショナルにとって理想的です。この試験に合格することで、候補者は PowerStore ストレージソリューションの管理とサポートにおけるスキルと知識を検証できます。この認定は雇用者に高く評価され、IT プロフェッショナルのキャリアアップに役立ちます。さらに、EMC はストレージ業界の認知度が高く、この認定は候補者が最新のストレージ技術を扱うために必要なスキルと知識を持っていることを証明します。

 

質問 # 45
Which number in the code-naming schema represents a beta distribution?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:A


質問 # 46
In which step of the ICW can the configuration details be exported?

  • A. Support Assist
  • B. Cluster Details
  • C. Cluster Configuration
  • D. License Configuration

正解:C


質問 # 47
Correctly order the steps of the embedded module replacement procedure.

正解:

解説:

Reference:
https://topics-cdn.dell.com/pdf/pwrstr-isg_en-us.pdf


質問 # 48
A Storage Administrator needs to connect through SSH to run svc commands. How is the SSH session configured?

  • A. NAS server IP address using port 26
  • B. Appliance IP address using port 26
  • C. Appliance IP address using port 22
  • D. NAS server IP address using port 22

正解:C


質問 # 49
A Storage Administrator has an existing single appliance Dell EMC PowerStore 3000T cluster. An additional PowerStore 9000T has been purchased to add into the existing cluster.
How does the administrator proceed?

  • A. The new appliance cannot be added to the cluster; appliance model and type must match when clustering appliances together
  • B. Additional VLTi links on the ToR switching must be configured for the 9000T to support the increased inter-switch network load
  • C. Add the new 9000T appliance into the cluster per the procedure; mixed models of the same type are supported
  • D. Remove two of the four NVMe NVRAM drives from the 9000T the caching configuration of all clustered appliances must match

正解:B


質問 # 50
During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode. What must be done first to avoid management software conflicts?

  • A. Disable node B boot mode
  • B. Reboot node B
  • C. Return node A to normal mode
  • D. Clear the boot mode

正解:C


質問 # 51
What is achieved when the Rapid Spanning Tree Protocol (RSTP) is enabled on a Dell EMC PowerStore network configuration?

  • A. Redundant connectivity between data switches
  • B. Fault tolerance between appliances in a PowerStore cluster
  • C. Management between appliance and vCenter on PowerStore X
  • D. Communication between data switches and management switch on PowerStore T

正解:C


質問 # 52
Which LED combination shows a connected and working node?

  • A. power LED: blinking green fault LED: off
  • B. power LED: blinking green fault LED: blue
  • C. power LED: steady green fault LED: amber
  • D. power: LED: steady green fault LED: off

正解:D


質問 # 53
Refer to the exhibit.

What is indicated when the circled LED on the node embedded module is illuminated solid amber?

  • A. Module is faulted
  • B. Node is faulted
  • C. Cluster is uninitialized
  • D. System is booting

正解:A

解説:
Reference:
https://www.dell.com/support/article/en-pk/sln321266/powerstore-understanding-led-colors-and- states-for-troubleshooting?lang=en


質問 # 54
From where can a data collection be initiated within Dell EMC PowerStore Manager?

  • A. Cluster, appliance, and event log
  • B. Appliance, node, and storage resource
  • C. Node, storage resource, and alerts
  • D. Cluster, appliance, and alerts

正解:D

解説:
Collecting Support Materials can be initiated several ways from PowerStore Manager. Data Collections can be started at the Cluster, Appliance, Storage Resource, and Alerts level.


質問 # 55
A Storage Administrator notices a Major alert present in Dell EMC PowerStore Manager relating to data protection. What action within the alert details slide-out panel is helpful in troubleshooting the data protection problem?

  • A. Acknowledge the alert to clear and resolve the problem
  • B. View the Associated Events for earlier related alerts
  • C. Access the Repair Flow link to schedule a support engagement
  • D. Examine Notifications to obtain a list of corrective actions

正解:D


質問 # 56
When planning for a Dell EMC PowerStore T implementation, how many IP addresses are required for the storage network?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:B

解説:
Explanation/Reference: https://topics-cdn.dell.com/pdf/pwrstr-ntwk-plang_en-us.pdf (22)


質問 # 57
Order the steps to prepare for an NDU process.

正解:

解説:


質問 # 58
When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

  • A. svc_node shutdown
    svc_rescue_state clear
  • B. svc_rescue_state clear
    svc_node reboot
  • C. svc_node restart
    svc_rescue_state start
  • D. svc_rescue_state normal
    svc_node start

正解:B


質問 # 59
Which reference source provides service information and FRU procedures for the Dell EMC PowerStore?

  • A. PowerStore Manager help
  • B. SolVe Tool
  • C. DELL EMC Online Support
  • D. Dell EMC PowerStore Product Page

正解:D


質問 # 60

Refer to the exhibit.
What type of cable is used for the ToR switch configuration shown for the S5248F-ON switches?

  • A. 25 GigE Twinax
  • B. 100 GigE QSFP28
  • C. 10 GigE Cat 6 Ethernet RJ-45
  • D. 10 GigE SFP optical cable

正解:B

解説:
Explanation/Reference: https://www.dellemc.com/resources/en-us/asset/technical-guides-support-information/solutions/ h18242-ready-stack-powerstore-dg.pdf?dgc=SM&cid=170850&lid=spr3492306896&linkId=93885839


質問 # 61
Correctly order the steps of the embedded module replacement procedure.

正解:

解説:

Reference:
https://topics-cdn.dell.com/pdf/pwrstr-isg_en-us.pdf


質問 # 62
What describes the power requirements for Dell EMC PowerStore?

  • A. Lower model numbered systems require less input voltage (VAC) than higher model numbered systems
  • B. Lower model numbered systems require less AC line current than higher model numbered systems
  • C. X models require less total power than T models
  • D. T models require less total power than X models

正解:B

解説:
Maximum input power 240 VAC ± 10%, single phase For 100-120V, a customer-supplied step-up transformer is required AC Line Current (operating maximum at 200 VAC) 8.1 A 8.1 A 9.0 A 9.0 A 9.3 A 10.4 A https://www.dell.com/support/manuals/en-us/powerstore-5000/pwrstr-plang/power-requirements-for-powerstore-x-model-and-powerstore-t-model?guid=guid-21e142df-e22c-4bbc-8978-7c6124753654&lang=en-us


質問 # 63
Refer to the exhibit.

What is the result of the network configuration shown for a Dell EMC PowerStore T?

  • A. Interfaces are configured for PowerStore discovery traffic
  • B. Ports 1/1/55 and 1/1/56 are added to a new LACP domain
  • C. Ports 1/1/55 and 1/1/56 are added to the VLTi domain
  • D. Interfaces are configured for remote replication traffic

正解:C

解説:
1. Run vlt-domain <ID> to create a new VLTi domain.
2. Run discovery-interface ethernet chassis/slot/portchassis/slot/port to add the two VLTi ports to the new domain. 3. Run backup destination <IP address of the other switch> to set the other switch as VLT backup, which is required for VLT heartbeat. #(conf-range-eth1/1/55-1/1/56) vlt-domain 1 #(conf-vlt-1) discovery-interface ethernet 1/1/55-1/1/56 #(conf-vlt-1) backup destination 172.17.57.30


質問 # 64
What is a step in configuring the ToR data switches for a Dell EMC PowerStore X?

  • A. Configure LACP uplink to management switch
  • B. Configure a port for the discovery laptop
  • C. Create node A port-channel
  • D. Create VLANs for NAS servers

正解:B


質問 # 65
What method is used to power down a Dell EMC PowerStore system in a true emergency situation?

  • A. Run svc_node shutdown
  • B. Power Down Cluster in PowerStore GUI
  • C. Remove base enclosure power cables
  • D. Turn off the cabinet switches

正解:D

解説:
Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-1000/pwrstr-isg/power-control- procedure-considerations?guid=guid-4352c94e-0ae7-4a2e-8593-9ae135bb9e34&lang=en-us


質問 # 66
Which network traffic is encrypted using IPsec?

  • A. OOB network
  • B. Inter-node network
  • C. ICD network
  • D. ICM network

正解:D


質問 # 67
How is a service laptop IP configured to connect to the Service LAN port of a Dell EMC PowerStore node?

  • A. Obtain IP address from DHCP on PowerStore
  • B. Static IP: 128.221.1.249 and netmask: 255.255.255.0
  • C. Leave IP address and netmask unconfigured
  • D. Static IP: 169.254.1.249 and netmask: 255.0.0.0

正解:B


質問 # 68
How many fan module failures can a node tolerate?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:B

解説:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf (14)


質問 # 69
What does the command "svc_journalctl | grep 'Mar 25 23:00'" do?

  • A. Rotates the log based on the specified date
  • B. Ignores log messages from the specified date
  • C. Retrieves log messages from the specified date
  • D. Deletes all logs before the specified date

正解:C


質問 # 70
......

更新された問題を提供していますDES-1241問題集PDF:https://jp.fast2test.com/DES-1241-premium-file.html

更新された公式問題DES-1241認定にはDES-1241問題集PDF:https://drive.google.com/open?id=1rVwop6e-fLZjFEpy_Z3pniW-u-NFbV6Q


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어