[2023年04月10日]C-IBP-2208試験問題集で100%合格率C-IBP-2208試験！
試験問題集リアルSAP Certified Application Associate問題集80解答を試そう！
SAP C-IBP-2208 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 24
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
- B. Minimum capacity utilization will result in pull production occurring.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Capacity leveling will be possible for production and storage resources.
正解: A,C
質問 25
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Geographic Chart Types
- B. Seasonal Chart Types
- C. Trend Chart Types
- D. Comparison Chart Types
- E. Simulation Chart Types
正解: B,C,D
質問 26
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Navigate to the Master Data Workbook in Excel and open the Log.
- B. Download the Rejection Report in the Data Integration app.
- C. Download the Initial Problem Report in the Data Integration app.
- D. Navigate to the Manage Master Data app and open the Log.
正解: D
質問 27
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Defining a different default planning area via the User Preferences.
- B. Setting a separate theme for the Home page in the Web UI.
- C. Having a different set of tiles in the Home group of apps.
- D. Add the system name and tenant information from the About section to the Home page.
正解: B,D
質問 28
You are modeling a new product introduction.Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app?Note: There are 2 correct answers to this question.
- A. Enter the Phase-out Start Date and Phase-out End Date
- B. Copy the launch dimension from the reference product to the new product
- C. Create planning objects for new combinations in the app
- D. Enter the product family to which the new product belongs
正解: B,C
質問 29
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Calculating how many periods inventory is going to last based on the planned demand
- B. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
- C. Search for and return the last not null value of the inventory key figure
- D. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
正解: A,C
質問 30
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.
- A. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- B. Key figures can be calculated across different planning levels.
- C. The calculation chain for a key figure must always result in a calculated key figure.
- D. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
正解: B,D
質問 31
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Both periods and profiles have start and end dates.
- B. Periods are identified by an alphanumeric prefix and profiles by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Both periods and profiles are identified by a unique integer.
正解: B,C
質問 32
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
- B. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
- C. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
- D. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
正解: C,D
質問 33
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.
- A. Add a new time profile level to the time profile.
- B. Change the numbering hierarchy of the period IDs in the time profile.
- C. Change the description of the attributes in the time profile.
- D. Change the past and future horizon of the levels in the time profile.
正解: C,D
質問 34
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Adjust Safety Stock Recommendations based on forecast error CV input
- B. Propagate forecast error to upstream locations in a supply chain network
- C. Adjust for forecast bias in Forecast Error CV calculations
- D. Identifiy intermittent demand for Forecast Error CV calculations
正解: A,C
質問 35
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- B. Keep the number of fairshare segments small.
- C. Avoid using telescopic time buckets.
- D. Increase the use of incremental lot size beyond the frozen horizon.
- E. Split into multiple planning areas to support weekly vs. daily planning needs.
正解: A,C,E
質問 36
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.
- A. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- B. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- C. It checks whether the required planning level master data exists for a subset of input key figures.
- D. It checks whether the sourcing in the Production Source Item Master Data type exists.
- E. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
正解: A,B,C
質問 37
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.
- A. Detailed Production Scheduling
- B. Analyze Supply Usage
- C. Gating Factors
- D. Planning with Product Allocations
正解: B,C
質問 38
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Excessive SAP IBP formatting in the Microsoft Excel UI
- B. Number of analytics charts displaying key figures' values
- C. Number of local members and complexity of calculations
- D. Complex calculation graphs for key figures
正解: A,D
質問 39
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.
- A. The Business Meaning of the attribute has been specified.
- B. The attribute should be a non-key attribute of the master data type.
- C. The attribute should be assigned to all planning levels.
- D. The attribute belongs to a simple or compound master data type.
正解: B,D
質問 40
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
- B. This application job can be run for multiple time profiles at once.
- C. A time profile has to be activated so that the application job can proceed.
- D. The assigned Planning Area must be active.
正解: A
質問 41
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Recommended Safety Stock
- B. Target Pipeline Stock
- C. Component Usage
- D. Target Cycle Stock
- E. Reorder Point
正解: A,B,D
質問 42
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used when you have more than three inputs at different planning levels in one calculation
- B. Used by end-users in planning views to help visualize cross-period calculations
- C. Used at any level of calculation level except the Request Level
- D. Used to break down a large calculation into manageable subcalculations
正解: A,D
質問 43
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Transportation Lead Time Error CV
- B. Holding Cost Percentage
- C. Minimum Lot Size
- D. Target Service Level
正解: C,D
質問 44
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Use drill-down functionality.
- B. Display all assigned analytics on a single UI.
- C. Link two analytics charts.
- D. Add process templates.
- E. Rename the charts.
正解: A,B,D
質問 45
......
あなたを余裕でC-IBP-2208試験合格させます！100%高合格率保証：https://jp.fast2test.com/C-IBP-2208-premium-file.html
C-IBP-2208問題集本日限定！無料アクセス可能に！：https://drive.google.com/open?id=1EFlf3kAXmrp8weeWzY22RZUGb4q5L22f