[2022年03月]更新のHP HPE6-A71問題集厳選された問題集でパスして、最短時間を目指そう
HP HPE6-A71試験問題集で[2022年最新] 練習 高合格率な試験問題集問題
質問 58
An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the Aruba Mobility Controller (MC)?
- A. OpenFlow Controller profile
- B. OpenFlow profile
- C. Mgmt Config profile
- D. Skype ALG Configuration profile
正解: A
質問 59
Refer to the exhibit.
An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?
- A. At both the Mobility Master and Managed Network levels
- B. At the Managed Network level
- C. At the controller levels
- D. At the two campus levels
正解: A
質問 60
An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.
What should the administrator use for this upgrade?
- A. Aruba image
- B. Loadable Service Module (LSM)
- C. Upgrade Profiles
- D. ClusterUpgrade Manager
正解: A
質問 61
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS-Switch configured for per-user tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS controller configured for per-user tunneled node.
- D. This is an ArubaOS-Switch configured for per-port tunneled node.
正解: D
質問 62
An administrator wants to implement 802.1X authentication on Ethernet ports on branch office controllers.
What must the administrator do to implement this policy?
- A. Define the port as trusted, and assign an AAA policy to the port.
- B. Define the port as trusted, and assign an AAA policy to the VLAN.
- C. Define the port an untrusted, and assign an AAA policy to the port.
- D. Define the port as untrusted, and assign an AAA policy to the VLAN.
正解: C
質問 63
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers C1 and C2.
* AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Anchor Controller (A-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC remains on C2, and the user's A-UAC switches to C2.
- B. The AP3's A-AAC remains on C2, and the user's A-UAC remains on C1.
- C. The AP3's A-AAC switches to C1, and the user's A-UAC switches to C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
正解: B
解説:
Explanation
質問 64
An administrator wants to use AirWave to manage the configuration policysettings of a set of ArubaOS-Switches. Where should the administrator perform this action?
- A. in APs/Devices
- B. in AMP Setup
- C. in Groups
- D. in Device Setup
正解: B
質問 65
Refer to the exhibit.
An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled.There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?
- A. Connected users are de-authenticated
- B. APs and clients are fully replicated.
- C. High value sessions are synchronized.
- D. APs reboot and rejoin the cluster.
正解: A
質問 66
An administrator purchases a RAP and has it shipped directly to a branch office. The branch office plugs in the RAP and the RAP contacts Aruba Activate. The RAP learns the Mobility Controller (MC) IP address andconnects to it. However, the connection fails.
Upon verifying the MC IP address in Aruba Activate, what should the administrator do to allow the RAP connection to succeed?
- A. Define the RAP's IPSec pre-shared key in Activate.
- B. Whitelist the RAP's certificate on the MC.
- C. Configure a VPN address pool in Activate.
- D. Whitelist the RAP's IP address on the MC.
正解: D
質問 67
An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to anadministrator who needs to only generate reports and monitor WLANS and ports?
- A. Network-operations
- B. Root
- C. Location-api-management
- D. AP-provisioning
正解: A
質問 68
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?
- A. ARM
- B. AirMatch
- C. Zones
- D. Clustering
正解: A
質問 69
Refer to the exhibit.
An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the Configuration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode so that it can be deployed to the RAPs?
- A. WLAN
- B. Roles & Policies
- C. Services
- D. Access Points
正解: A
質問 70
Refer to the exhibit.
An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S-UAC) tunnels are built from the AP to the respective controllers in the cluster.
Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?
- A. to allow the AAA Server to enforce RADIUS CoA in case the A-UAC experiences an outage
- B. to provide a VRRP group for election of the cluster leader
- C. to allow the AP to establish redundant AP Anchor Controller (AAC) connections to the cluster
- D. to allow High Availability (HA) Fast Failover to function in case a controller experiences an outage
正解: A
質問 71
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-AMobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains onC1.
- C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
正解: C
質問 72
Refer to the exhibit.
A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?
- A. The user misconfigured the Managed Network Settings profile in Windows.
- B. The AP has reached the limit for number of users that are allowed to connect to the radio.
- C. The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.
- D. The controller cannot reach the AAA server to perform the authentication.
正解: B
質問 73
......
HPE6-A71試験問題集でPDF合格保証 成功は正確かつ更新された問題：https://jp.fast2test.com/HPE6-A71-premium-file.html
HPE6-A71問題集-[最新2022]HP試験問題集を掴み取れ：https://drive.google.com/open?id=1T2yRaA6l8roX6Ss4N9OZ2ax_GRKq1FZA