[2022年最新] リアルなF5問題集を使って 100%無料301a試験問題集 [Q64-Q83]

[2022年最新] リアルなF5問題集を使って 100%無料301a試験問題集

リアル301a問題集で最新のF5練習テスト問題集

F5 301a 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Given a scenario determine the steps required to maintain SSL certificates Given a scenario, determine the minimum profiles for an application
トピック 2	Determine the appropriate LTM device security configuration to protect against a security threat Given a scenario, determine the appropriate monitor type and parameters to use
トピック 3	Describe how to deploy or upgrade vCMPguests and how the resources are distributed Explain the steps necessary to configure AVR
トピック 4	Given an application configuration, determine which functions can be offloaded to the LTM device Given a scenario, determine the appropriate load balancing method(s)
トピック 5	Determine the effect of LTM features and or modules on LTM device performance and or memory Explain the effect of configuration options and resource health on load balancing decisions

質問 64
A pool has four members. Ail of the servers have been designed and configured with the same application. Each client's request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?

A. Observed
B. Priority Group
C. Ratio
D. Least Connections

正解: D

質問 65
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:

Which change must be made to the configuration to perform SSL offloading?

A. Remove the severssl profile
B. Remove the clientssl and http profiles
C. Remove the clientssl and serverssl profiles
D. Remove the clients profile

正解: A

質問 66
A node is assigned two monitors as seen in this configuration.

What is the status of a member that runs on that node and listens on port 443?

A. UNAVAILABLE
B. UP
C. DOWN
D. UNKNOWN

正解: A

質問 67
An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?

A. configure remote authentication for all users with a default user role of Guest
B. configure remote authentication for all users with a default user role of Operator
C. configure remote authentication and map support personnel users to the Guest user role
D. configure remote authentication and map support personnel users to the Operator user role

正解: C

質問 68
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)

A. Forwarding IP
B. Stateless
C. Performance HTTP
D. Internal
E. Standard

正解: D,E

質問 69
Exhibit.

The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?

A. ConfigSync works Connection Mirroring works
B. ConfigSync does NOT work; Connection Mirroring works
C. ConfigSync does NOT work. Connection Mirroring floes NOT work.
D. ConfigSync works. Connection Mirroring docs NOT work

正解: B

質問 70
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?

A. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1.
B. Interval 30, timeout 30
C. Interval 10, timeout 31
D. Interval 10, timeout 30

正解: C

質問 71
An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.
What is a potential result of this action?

A. Other service ports could be allowed
B. IP conflict result
C. HTTP traffic is NOT allowed
D. Packet filter allowances are also required

正解: C

質問 72
Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?

A. Offline (Disabled)
B. Unavailable (Disabled)
C. Available (Enabled)
D. Unknown (Enabled)

正解: C

質問 73
The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)

B)

C)

D)

A. Option D
B. Option B
C. Option A
D. Option C

正解: D

質問 74
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

A. configure a serial failover cable for mirror traffic
B. configure a OneConnect profile to mirror connections
C. enable Mirroring for a virtual server and persistence profile
D. configure a VLAN and primary mirroring address for mirror traffic
E. enable Clone Pools for a virtual server and a persistence profile

正解: C,D

質問 75
An LTM device needs an additional traffic group.
Which configuration item is required?

A. Group name
B. MAC Masquerade Address
C. Auto Fallback Timeout
D. Default device

正解: A

質問 76
Consider the monitor configuration displayed below.

What is the status of a pool member that responds with ''200 OK''?

A. disabled
B. unknown
C. down
D. available

正解: C

質問 77
AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

A. The LTM device has not provisioned AVR.
B. The site has too many licensed modules.
C. The site is under DDOS attack
D. The LTM device exceeds licensed traffic limits.

正解: C

質問 78
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?

A. the Dashboard
B. the Performance panel
C. the Statistics panel
D. the AVR module

正解: D

質問 79
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

A. VS_172_24_1_WILDCARD
B. VS_HTTP_WILDCARD
C. VS_172_24_WILDCARD
D. VS_HTTPS_WILDCARD

正解: C

解説:
Match the network segment first and then port.

質問 80
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?

A. tcp, clientssl, serverssl
B. tcp, http, request logging
C. tcp, http, clientssl
D. http, clientssl, persistence

正解: C

質問 81
An LTM Specialist decides to offload SSL traffic on the LTM device instead of just passing it through. The LTM Specialist needs to change the configure from a Performance (Layer 40 virtual server to a Standard virtual server with SSL offload.
Which two element the LTM Specialist consider when performance this task? (Choose two.)

A. Port exhaustion
B. CPU load
C. Sensitive connections
D. Connection mirroring
E. Memory load

正解: B,E

質問 82
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?