試験高合格率保証2022年03月12日 HPE0-S22試験問題と正確な回答！ [Q47-Q68]

試験高合格率保証2022年03月12日 HPE0-S22試験問題と正確な回答！

テストエンジン練習問題HPE0-S22有効最新の問題集

質問 47
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?

A. HPE Apollo r2200
B. HPE Apollo 6000
C. HPE Apollo 8000
D. HPE Apollo r2800

正解: A

質問 48
An architect is designing an HPE Apollo 6000 solution to support a customer application. The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?

A. The application is single-threaded.
B. The application uses high amounts of memory.
C. The application requires high storage capacity.
D. The application requires GPU acceleration.

正解: D

質問 49
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
* 135 processors with 4 2.9GHz cares each
* 4. 32TB RAM
* 64.8TB local storage on SSDs
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one-tenth or even one-hundredth of its potential?

A. amount of local storage on SSDs
B. number of cores per processor
C. amount of RAM
D. number of processors

正解: A

質問 50
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS. Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?

A. drive capacity and memory
B. drive type (HDD versus SSD) and drive capacity
C. adapter bandwidth and processors
D. processor and memory

正解: A

質問 51
A customer purchases a hyperscale solution based on the HPE Moonshot platform and needs a management tool is suitable for this environment and meets the customer's needs?

A. HPE Helion Cloud System 9 Foundation
B. HPE Insight Cluster Management Utility
C. HPE OneView with HPE Operation Analytics plugin
D. HPE Cloud OS for HPE Moonshot

正解: B

解説:
Explanation/Reference:

質問 52
A customer has 1,000 virtual machines that run on VMware ESXi servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines.
Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?

A. HPE Operations Analytics for HPE OneView
B. HPE Insight Control
C. HPE Helion CloudSystem 9
D. HPE Cloud Optimizer for HPE OneView

正解: D

解説:
HPE Cloud Optimizer "Capacity management: Fix allocation problems * Reclaim over-allocated vCPU, memory from VMs using the right-sizing analysis reports * Reclaim storage lost to old snapshots - usually a good 30% of spaced used in most datacenters" https://h20195.www2.hpe.com/v2/GetPDF.aspx/c05183790.pdf

質問 53
A customer has 1,000 virtual machines that run on VMware ESXI servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines.
Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?

A. HPE Operations Analytics for HPE OneView
B. HPE Insight Control
C. HPE Helion CloudSystem 9
D. HPE Cloud Optimizer for HPE OneView

正解: D

質問 54
An architect proposes an HPE Apollo solution for a customer's environment. The customer needs the ability to have each of the network adapters in the HPE Apollo server connect to separate switches while also allowing them to be bonded for load-balancing.
Which networking feature on the switches will meet the customer's need?

A. Transparent Interconnection of Lots of Links (TRILL)
B. Intelligent Resilient Framework (IRF)
C. Network Virtualization using Generic Routing Encapsulation (NVGRE)
D. Virtual Extensible LAN (VXLAN)

正解: B

質問 55
An architect proposes an HPE Moonshot solution to a customer. The customer informs the architect that the data center switches can only provide four 40GbE ports per rack.

How should the architect modify the proposed solution so that each rack meets the requirement?

A. Use the iLO Chassis Management (CM) module port to support both iLO and production traffic on four of the HPE Moonshot chassis
B. Replace the 45XGc modules with the 180G module to aggregate uplink ports on multiple chassis into a single port
C. Use the iLO Chassis Management (CM) module port to daisy chain the chassis together and let the chassis in the daisy chain share uplinks
D. Create two Intelligent Resilient Framework (IRF) fabrics, each with four switch modules, and let the switches in each fabric share uplinks

正解: C

質問 56
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors.
The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?

A. HPE Apollo r2200
B. HPE Apollo 6000
C. HPE Apollo 8000
D. HPE Apollo r2800

正解: A

質問 57
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?

A. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
B. The customer needs the system to recover quickly from a failure.
C. The customer's network infrastructure is based on QoS service.
D. The customer plans to increase the memory in the nodes in the future.

正解: A

質問 58
An architect is developing a proof of concept (PoC) for an HPE Apollo 6000 solution. The architect needs to monitor CPU, memory, disk IO, and network IO utilization while running the customer application.
Which HPE solution can the architect use for this monitoring?

A. HPE OneView 2.0
B. HPE Apollo Management Module
C. HPE Advanced Power Management (APM)
D. HPE Insight Cluster Management Utility (CMU)

正解: B

質問 59
A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total:
135 processors with 4 2.9GHz cares each

4. 32TB RAM

64.8TB local storage on SSDs

Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one- tenth or even one-hundredth of its potential?

A. amount of local storage on SSDs
B. number of cores per processor
C. amount of RAM
D. number of processors

正解: A

質問 60
A proposed solution includes the HPE Moonshot-4QSFP+ Uplink Modules. The customer informs the architect that the planned purchase of 40GbE switches has been postponed. The customer still intends to purchase
40GbE switches within a year, but in the meantime, existing 10GbE switches will be used. These switches are HPE network switches located 25 meters from the location of the racks that house the HPE Moonshot Solution.
The customer needs 30Gb/s bandwidth.
Which action should the architect recommend to allow the customer to deploy the solution immediately and easily take advantage of 40GbE when deployed later?

A. Replace the DAC cables with DAC splitter cables
B. Replace the QSFP+ transceivers with SFP+ transceivers
C. Swap in HPE Moonshot-16SFP+ Uplink Modules
D. Add QSP+/SFP+ adaptor kits to the design

正解: D

質問 61
An architect explains a software-defined data center (SDDC) concept and its benefits to a customer. The customer indicates an interest and so the architect needs to verify whether the customer is ready to move to the SDDC.
Which additional information should the architect obtain from the customer to verily this?

A. whether they have a disaster recovery plan implemented
B. whether they already virtualize compute and storage resources
C. whether they have a workplace mobility plan implemented
D. whether they have standardized on a single vendor

正解: B

質問 62
During a data center transformation discussion, an architect obtains the following customer information:
* core business depends heavily on advanced data modelling techniques that has been developed internally
* infrastructure in use takes anywhere from 10 hours to five days to complete complex data models for the various development teams that rely on them
* has a proud reputation as an "environmentally friendly" Fortune 500 company
* increasing productivity of its development team is the highest priority Which large scale HPC solution should the architect recommend to help the customer achieve its transformation goals?

A. HPE Apollo 6000
B. HPE Apollo 8000
C. HPE Apollo 2000
D. HPE Integrity Superdome X

正解: C

質問 63
An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application.
When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?

A. when the application requires high throughput between processors and disk drives local to the same compute tray
B. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
C. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links
D. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes

正解: D

質問 64
A customer needs a hosted physical desktop solution. Users will run typical oꢀice applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?

A. HPE m400
B. HPE m710p
C. HPE m710
D. HPE m700

正解: B

解説:
Explanation/Reference:
Reference https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html

質問 65
Which discussion point describes a Tier I approach to datacenter redundancy levels?

A. implementing primarily a storage redundancy technique
B. composing the solution of basic hypervisor clustering technology
C. using a single path for power and cooling distribution without redundant components
D. optimizing DIMM memory and RAID protected storage

正解: B

質問 66
How does the HPE c7000 BladeSystems use of network infrastructure compare with the
HPE Apollo 6000's?

A. The HPE c7000 BladeSystem offers less port variety.
B. The HPE Apollo 6000 uses fewer network ports per server.
C. The HPE c7000 BladeSystem offers greater port consolidation.
D. The HPE Apollo 6000 offers greater per server connectivity.

正解: A

質問 67
An architect is presenting a file-based transcoding solution to a customer. The solution will include a single HPE Moonshot 1500 chassis that will be directly connected to HPE Apollo 4530 storage via 4 x QSFP uplinks.
The customer is concerned about the significant traffic that will generated between the HPE Moonshot 1500 chassis and the HPE Apollo 4530 storage.
Which factor should the architect design into the solution to address the customer's concerns?