正真正銘のベスト試験材料はHPE0-S22テストエンジン練習試験合格させます
[2022年更新]HPE0-S22のPDF問題、完璧に練習問題で合格
HP HPE0-S22 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 44
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?
- A. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
- B. The customer needs the system to recover quickly from a failure.
- C. The customer's network infrastructure is based on QoS service.
- D. The customer plans to increase the memory in the nodes in the future.
正解: A
質問 45
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment.
Which solution should the architect propose to protect the customer from this threat?
- A. Use Smart Array Controllers.
- B. Enable Legacy BIOS mode.
- C. Use encrypted drives.
- D. Enable UEFI secure boot mode.
正解: D
解説:
References:
質問 46
A customer needs to streamline monitoring to its HPE Apollo 6000 solution.
Which benefit can HPE Advanced Power Management (APM) provide to this customer?
- A. It monitors the utilization of resources such as CPU and memory.
- B. It discovers and inventories XL servers installed in the HPE Apollo chassis.
- C. It enables HPE OneView to automatically discover and map the chassis and its servers.
- D. It audits the firmware on XL servers installed in the HPE Apollo chassis.
正解: B
質問 47
A customer needs a server infrastructure update for its Hadoop HBase solution.
The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges.
The populated chassis provide the following in total:
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one-tenth or even one-hundredth of its potential?
- A. amount of local storage on SSDs
- B. number of cores per processor
- C. amount of RAM
- D. number of processors
正解: A
質問 48
Which network infrastructure components should an architect consider when recommending 40GbE in a server solution?
- A. OM4 cables can be reused for all runs out to the maximum of 300 meters
- B. Cables will need to be replaced by multi strand MPO cables
- C. Multimode cables will all need to be replaced by single mode cables
- D. OM2 cables can be reused for runs of 50 meters or less
正解: B
質問 49
Which of the HPE Transformation Areas should the architect discuss when the customer's concerns span backup and recovery, high availability, and disaster recovery?
- A. Enable workplace productivity.
- B. Protect the digital enterprise.
- C. Empower the data-driven organization.
- D. Transform to a hybrid infrastructure.
正解: B
解説:
References:
質問 50
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE OneView 2.0
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE Intelligent Provisioning (IP)
正解: C
解説:
Explanation
質問 51
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
- B. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- C. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
- D. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
正解: C
質問 52
A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
- A. how to add an mRCA module to provide a graphical installation method for new nodes
- B. how to use iLO remote console to provide a graphical installation method for new nodes In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.
- C. how to use SCCM to provide a graphical installation method for new nodes
- D. how to use VSP to provide a graphical installation method for new nodes
正解: A
質問 53
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Select and Place:
正解:
解説:
質問 54
A customer operates a data center based on third-party servers, which includes third-party storage with an iSCSI SAN.
The architect needs to design a solution that can seamlessly access the current data from a new HPE Moonshot system.
How can the HPE Moonshot system access the legacy storage?
- A. using an HPE Multifunction router to convert iSCSI to Virtual Connect
- B. using native iSCSI initiator to connect to the storage on the management LAN
- C. using native iSCSI initiator to connect to the storage on a dedicated LAN
- D. using native iSCSI target software to connect to the storage on a dedicated LAN
正解: C
質問 55
A customer is planning to migrate from a Virtual Connect Enterprise Manager (VCEM) environment to HPE OneView.
Which topic should the architect discuss with the customer before the migration is implemented?
- A. that direct migration from the VCEM is not possible and the customer should plan to remove VC Domain from VCEM first
- B. that additional one-time-use licenses are required for migration
- C. that migration to the HPE OneView will replace existing WWNs and MAC addresses with new ones, assigned by HPE OneView
- D. that HPE OneView Advanced licenses should be added to the appliance prior to the migration
正解: A
質問 56
A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m400
- B. HPE m710p
- C. HPE m710
- D. HPE m700
正解: B
解説:
Explanation
質問 57
An architect is designing an HPE Apollo 6000 solution to support a customer application.
The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The application is single-threaded.
- B. The application requires GPU acceleration.
- C. The application uses high amounts of memory.
- D. The application requires high storage capacity.
正解: D
質問 58
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution, Which solution meets these requirements?
- A. HPE OneView 2.0
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE Intelligent Provisioning (IP)
正解: C
解説:
Explanation/Reference:
Reference: https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjU36a30sHTAhVJShQKHSt0 BhYQFggnMAA&url=http%3A%2F%2Fwww.hpe.com%2Fsupport%
2Fmoonshot_os_deployment_en&usg=AFQjCNHzc8octr9gtYrHDWIERZNfWTSoEw&sig2=ITJAdGidDUO SlN-6u7QKeQ
質問 59
A customer has 1,000 virtual machines that run on VMware ESXI servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines.
Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?
- A. HPE Operations Analytics for HPE OneView
- B. HPE Insight Control
- C. HPE Helion CloudSystem 9
- D. HPE Cloud Optimizer for HPE OneView
正解: D
質問 60
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution,
Which solution meets these requirements?
- A. HPE OneView 2.0
- B. HPE InsightControl server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE Intelligent Provisioning (IP)
正解: C
解説:
Referencehttps://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja
& uact=8&ved=0ahUKEwjU36a30sHTAhVJShQKHSt0BhYQFggnMAA&url=http%3A%2F%
2 Fwww.hpe.com%2Fsupport%2Fmoonshot_os_deployment_en&usg=AFQjCNHzc8octr9gt
YrHDWIERZNfWTSoEw&sig2=ITJAdGidDUOSlN-6u7QKeQ
質問 61
An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE.
Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?
- A. HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
- B. HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
- C. HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules
- D. HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules
正解: B
質問 62
An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?
- A. IT staff can open a Remote Console to any cartridge linked to an mRCA through the iLO CM.
- B. Remote Console access is only supported when a cartridge is part of an HPE Helion CloudSystem 9.x solution.
- C. IT staff can open a Remote Console to any cartridge through the iLO CM.
- D. Remote Console access is not supported for cartridges; IT staff should use local consoles instead.
正解: A
質問 63
A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies.
Which solution should the architect recommend to help solve these issues?
- A. HPE Power Advisor
- B. HPE OneView 2.x
- C. HPE Advanced Power Manager
- D. HPE Insight Remote Support
正解: C
解説:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3291ENN.pdf
質問 64
......
ベスト最新資料はHPE0-S22オンライン練習試験：https://jp.fast2test.com/HPE0-S22-premium-file.html