究極のガイド準備D-PST-DY-23認証試験PowerStore Deployは2025年更新
リアルD-PST-DY-23問題集でEMC正確なアンサーは最新問題は2025年更新
EMC D-PST-DY-23（Dell Powerstore Deploy 2023）認定試験は、Dell Powerstore 2023ソリューションの展開に関する個人の知識とスキルをテストするために設計されています。この試験は、Dell Powerstore Solutionsの計画、展開、管理、およびサポートの経験がある専門家を対象としています。認定試験では、Dell Powerstoreアーキテクチャ、ネットワーキング、ストレージプロビジョニング、データ保護、システム管理など、さまざまなトピックをカバーしています。 EMC D-PST-DY-23認定試験に合格すると、個人が生産環境でDell Powerstore 2023ソリューションを展開するために必要なスキルと知識があることを検証します。
質問 # 20
Refer to the exhibit.
Which SMB path is used to access the share from client side?
- A. \\SMB-FS07\Sales\Hmarine_Sales
- B. \\nas-smb07.hmarine.test\ Hmarine_Sales
- C. \\nas-smb07.hmarine test\SMB-FS07\ Hmarine_Sales
- D. \\SMB-FS07\Hmarine_Sales
正解：B
質問 # 21
Which two NAS servers must be configured with DNS support? (Choose two.)
- A. Servers that are used for Multiprotocol access.
- B. Servers that are configured as Standalone.
- C. Servers that are joined to Active Directory.
- D. Servers that are used as FTP servers.
- E. Servers that are accessed through S3 protocol.
正解：A、C
解説：
B . Servers that are joined to Active Directory:
DNS is required for resolving domain controllers' names when NAS servers are joined to an Active Directory domain. Proper DNS support ensures seamless integration and authentication within the domain.
D . Servers that are used for Multiprotocol access:
Multiprotocol access allows both SMB (CIFS) and NFS clients to access the same NAS server. DNS is essential for name resolution, especially in environments where SMB relies on domain-based configurations.
質問 # 22
What are two supported combinations of source and destination vVol Storage Containers when replicating Resource Groups on PowerStore? (Choose two.)
- A. One-to-one replication arouofrom source storage container to destination storage container.
- B. Cascade replication to three different sites.
- C. One-to-many replication volumes from one source PowerStore to multiple destination PowerStore appliances.
- D. Multiple replications in different directions.
正解：A、D
解説：
PowerStore supports a straightforward one-to-one relationship where a resource group in a source storage container is replicated to a destination storage container. This is the most common and simplest replication setup.
質問 # 23
A PowerStore administrator is creating a host group.
Which two protocol types can be selected for a new host group? (Choose two.)
- A. InfiniBand
- B. iSCSI
- C. NVMe/TCP
- D. FC
正解：B、C
質問 # 24
Which network is used for storage migration between PowerStore T appliances?
- A. vMotion
- B. Storage
- C. Management
- D. Cluster
正解：B
質問 # 25
Which network does the PowerStore Discovery Utility use to identify unconfigured appliances?
- A. IDN
- B. Management
- C. Internal
- D. ICM
正解：B
質問 # 26
Which two operations does the PowerStore NAS VAAI plug-in support? (Choose two.)
- A. Quota Exceeded Behavior
- B. Atomic Test and Set
- C. Extended Statistics
- D. Reserve space
- E. Space Reclaim
正解：C、D
質問 # 27
What is the default exposed LUN0 used for?
- A. Internal migration reserve LUN
- B. Storage Array Controller Device
- C. vVol protocol endpoint
- D. NVMe Discovery Controller
正解：C
質問 # 28
What are three requirements of asynchronous file replication? (Choose three.)
- A. Configure File Mobility Network.
- B. Create bond 1 and Tag replication.
- C. Configure Data Storage Network.
- D. Create FC zoning between PowerStore.
- E. Create Remote System.
正解：A、B、E
解説：
Here's a detailed explanation of each requirement:
C . Create bond 1 and Tag replication:
Bonding: Bonding (also known as link aggregation) combines multiple physical network interfaces into a single logical interface (bond1 in this case). This provides redundancy and increased bandwidth for replication traffic. If one physical link fails, replication can continue over the remaining links in the bond.
Tagging: Tagging replication traffic (usually with a VLAN tag) ensures that it is properly routed over the network and isolated from other types of traffic. This helps maintain performance and security for replication.
D . Create Remote System:
Defining the Replication Relationship: In PowerStore Manager, you need to create a "Remote System" object to establish the relationship between the source PowerStore appliance and the destination appliance where replicated data will be stored. This involves specifying the management IP address and credentials of the remote system.
E . Configure File Mobility Network:
Dedicated Network for File Replication: The File Mobility Network (FMN) is a dedicated network in PowerStore specifically for file-level replication traffic. It consists of three additional IP addresses per PowerStore cluster that utilize the existing management network VLAN, gateway, and netmask. These interfaces are mapped to the 1 GbE management ports, sharing the physical port with the existing management interfaces. 1 Isolation and Performance: Using a separate network for file replication ensures that this traffic doesn't interfere with other network activities, such as iSCSI or user access to file shares. This helps maintain optimal performance for both replication and other operations.
Why the other options are incorrect:
A . Create FC zoning between PowerStore: FC zoning is used for block-level storage access (like Fibre Channel SAN), not for file-level replication over Ethernet.
B . Configure Data Storage Network: While a Data Storage Network is essential for general storage traffic, it's not a specific requirement for configuring asynchronous file replication. File replication relies on the File Mobility Network.
Dell PowerStore Reference
PowerStore: Replication Technologies - Overview and Prerequisites: This document provides a comprehensive overview of replication in PowerStore, including the requirements for different replication types. It specifically mentions the need for a File Mobility Network for file replication.
Link to PowerStore documentation: https://infohub.delltechnologies.com/l/dell-powerstore-replication-technologies/overview-and-prerequisites-1/ By fulfilling these requirements, you can ensure that asynchronous file replication is properly configured and optimized for performance and reliability in your PowerStore environment.
質問 # 29
At what point in the configuration of an External Storage import session does the data path from the host to the PowerStore system become the active I/O path?
- A. When the import session begins
- B. As MPIO restarts on the host
- C. During the ImportKit installation
- D. Before launching the Import Storage wizard
正解：A
解説：
https://www.dell.com/support/manuals/en-aw/powerstore-1000/pwrstr-import/overview-of-the-non-disruptive-import-process?guid=guid-b91e4e36-e984-40ae-a484-75d8731926d6&lang=en-us
質問 # 30
What is a step in configuring VLT interconnects of a PowerStore X implementation?
- A. Disable L2 mode on VLT ports.
- B. Disable VLT port MACs.
- C. Enable LLDP neighbors.
- D. Enable VLAN1 on VLT ports.
正解：A
解説：
https://dl.dell.com/topicspdf/pwrstrt-ntwkg_en-us.pdf?dgc=SM&cid=268781&lid=spr4844651529&linkId=119200713
質問 # 31
A storage administrator is configuring an import session from a VNX2 for Windows host data. The administrator inputs the SPA IP address into the Add Remote System configuration. The administrator then checks the Verify Alternate Address option for the User Authentication configuration.
What does this action provide?
- A. Validates the SPB IP address and certificate for high availability
- B. Selects the PowerStore Global Storage Discovery IP
- C. Generates a duplicate of the SPA RSA key for the SPB HTTPS certificate
正解：A
質問 # 32
SIMULATION
You're absolutely right! I apologize for my previous response. I can definitely try to extract the text from the image.
Here's the "Task" as written in the image:
A storage administrator must provision local storage resources for his database as per the below requirements:
Create a new "Database" storage resource as a capacity of 5TB
PowerStore under load must prioritize this workload
ESXi host called "ESXi3" is using iSCSI connectivity
The ESXi host must use the LUN number of 101
Use the simulator to make this configuration change.
正解：
解説：
See explanation below
Explanation:
1. Create the Host
Navigate to Compute > Hosts.
Click Add Host.
Enter the host name: ESXi3
Select iSCSI as the protocol.
Click Next.
Select the appropriate Network and Port Group for iSCSI connectivity.
Click Add.
2. Create the Volume
Navigate to Storage > Volumes.
Click Add Volume.
Enter the volume name: SQL_Datastore
Set the volume size to 5 TB.
Important: Under "Advanced Settings," locate the "Performance" section and set the Workload Type to Database. This will prioritize the volume's performance for database operations.
Click Add.
3. Map the Volume to the Host
On the Volumes page, locate the newly created SQL_Datastore volume.
Click the More Actions button (three vertical dots) and select Map to Host.
Choose the ESXi3 host.
Important: In the "LUN ID" field, enter 101 to assign the desired LUN number.
Click Map.
Verification
After completing these steps, go back to the Hosts page and select ESXi3.
Click the Volumes tab to confirm that the SQL_Datastore volume is mapped to the host with the correct LUN ID (101).
Key Considerations
iSCSI Network Configuration: Ensure that your iSCSI network is properly configured with the necessary VLANs and IP addresses.
Host Connectivity: Make sure that the ESXi3 host has the correct iSCSI initiator configuration to connect to the PowerStore appliance.
By following these steps, you'll successfully provision the local storage resources for the database on your new ESXi host, meeting all the specified requirements.
質問 # 33
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?
- A. TCP and UDP ports 443 and 80
- B. TCP port 5353 and UDP port 5353
- C. TCP port 80 and UDP port 80
- D. TCP port 8443 and UDP port 5353
正解：B
解説：
To properly discover a Dell PowerStore appliance using the Discovery Utility, you need to ensure that the following ports are open: TCP/UDP 5353: This port is used for mDNS (Multicast DNS) which is the protocol used by the PowerStore Discovery Utility to locate unconfigured PowerStore appliances. mDNS is essential for the appliance discovery process. (Grok 2)
* mDNS (Multicast DNS): PowerStore uses mDNS for discovery, especially when the array is unconfigured. mDNS allows devices to discover each other on a local network without needing a pre-configured DNS server. This is essential for the initial setup and discovery of a new PowerStore system.
* Port 5353: This is the standard port used for mDNS communication. Both TCP and UDP port 5353 need to be open for mDNS to function correctly.
質問 # 34
Place the steps in the correct order to configure vCenter server to use PowerStore to support virtual volumes.
正解：
解説：
1 - Add PowerStore cluster as VASA provider.
2 - Create vVol DataStore.
3 - Create VM storage policies.
4 - rovision VMs.
質問 # 35
Which requirement of a source storage system is invalid when participating in PowerStore Native Import migration?
- A. For PowerMax or VMAX, the front-end connectivity must be FC
- B. Administrator privileges are required on the source and associated hosts to import to a PowerStore cluster
- C. For EqualLogic, the front-end connectivity must be iSCSI
- D. With iSCSI connectivity between source and PowerStore, Global storage IP address is not required
正解：D
質問 # 36
Place the steps in the correct order to configure vCenter server to use PowerStore to support virtual volumes.
正解：
解説：
Explanation:
A screenshot of a computer Description automatically generated
質問 # 37
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hoursOT
Retention of 2 daysOT
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
正解：
解説：
see the Explanation for the solution.
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
質問 # 38
Refer to the exhibit.
Which SMB path is used to access the share from client side?
- A. \\SMB-FS07\Sales\Hmarine_Sales
- B. \\nas-smb07.hmarine.test\ Hmarine_Sales
- C. \\nas-smb07.hmarine test\SMB-FS07\ Hmarine_Sales
- D. \\SMB-FS07\Hmarine_Sales
正解：B
質問 # 39
Which two pieces of information are required to create a new remote system connection? (Choose two.)
- A. IP address of local system
- B. Remote domain name
- C. IP address of remote system
- D. Remote PowerStore name
- E. Network Latency
正解：C、E
解説：
In the Add Remote System slide-out panel, configure the following fields:
- Remote system type - Select PowerStore.
- Management IP address
- Description (optional)
- Network latency
https://www.dell.com/support/manuals/en-us/powerstore-7000/pwrstr-protect-data/add-a-remote-system-connection-for-replication-and-metro?guid=guid-937b06e1-2a74-40e1-a8b6-9aae6f72e27d&lang=en-us
質問 # 40
What are two minimum requirements for using VMware Site Recovery Manager (SRM) with PowerStore? (Choose two.)
- A. VMware SRM version 8.0 and newer
- B. VMware vCenter Server and ESXi hosts version 6.5 and newer
- C. VMware SRM version 8.3 and newer
- D. VMware vCenter Server and ESXi hosts version 6.7 and newer
正解：C、D
質問 # 41
SIMULATION
An administrator received a request to provision a new test dev volume.
Use the simulator to provision a volume of 50 GB for their application team. Use a category of Other. The volume performance must not impact the production I/O when the system is heavily loaded.
When you have finished continue to the next question.
正解：
解説：
See explanation below
Explanation:
1. Create the Volume
Navigate to Storage > Volumes.
Click + CREATE.
Enter the volume name (e.g., "TestDevVolume").
Set the volume size to 50 GB.
In the "Category" dropdown, select Other.
Important: Under "Advanced Settings," locate the "Performance" section and set the Workload Type to Low. This will ensure that the volume's performance has minimal impact on production I/O, especially during periods of heavy system load.
Click Add.
Verification
After creating the volume, you can verify its settings on the Volumes page. Check that the size, category, and workload type are correctly configured.
Key Considerations
Workload Type: The "Low" workload type setting is crucial in this scenario. It prioritizes production I/O over the test/dev volume, preventing performance contention.
Performance Monitoring: It's a good practice to monitor the system's performance after provisioning the volume, especially during peak usage, to ensure that the production workloads are not negatively affected.
By following these steps, you'll successfully provision a 50 GB volume for the application team with the appropriate performance settings to avoid impacting production I/O. This meets the requirements of the simulation task.
質問 # 42
Which two pieces of information are required to create a new remote system connection? (Choose two.)
- A. IP address of local system
- B. Network Latency
- C. Remote PowerStore name
- D. Remote domain name
- E. IP address of remote system
正解：C、E
質問 # 43
Which two NAS servers must be configured with DNS support? (Choose two.)
- A. Servers that are used for Multiprotocol access.
- B. Servers that are configured as Standalone.
- C. Servers that are joined to Active Directory.
- D. Servers that are used as FTP servers.
- E. Servers that are accessed through S3 protocol.
正解：A、C
質問 # 44
......
PowerStore Deploy D-PST-DY-23試験練習問題集：https://jp.fast2test.com/D-PST-DY-23-premium-file.html
D-PST-DY-23プレミアム資料テストPDFで無料問題集お試しセット：https://drive.google.com/open?id=1byCtqyZRbwKSzzUuvArzbEZjESWcmnRJ