更新済みの2025年02月 D-PST-DY-23試験練習テスト問題
検証済みD-PST-DY-23問題集と解答100%一発合格保証で更新された問題集
EMC D-PST-DY-23、またはDell PowerStore Deploy 2023試験は、Dell PowerStoreの展開に特化したITプロフェッショナルのスキルと知識を検証する認定プログラムです。この試験は、この最先端の技術に精通することによってキャリアの見通しを向上させたいと考えている個人を対象としています。
EMC D-PST-DY-23試験は、データセンターの操作、ストレージエリアネットワーク（SAN）、およびサーバー仮想化を十分に理解している専門家向けに設計されています。この試験では、ベストプラクティスを使用してクラスター化されたDell Powerstoreシステムのインストール、構成、および管理を実行する候補者の能力をテストします。試験に必要なその他のスキルには、マルチベンダー環境でのDell Powerstoreソリューションの展開や、ファイバーチャネル、ISCSI、およびNFS/SMBプロトコル用のDell Powerstoreの構成が含まれます。
質問 # 29
An administrator is asked to create NVMe-vVol host in PowerStore.
Which requirement must be met to complete the task?
- A. The host must be using the ESXi operating system
- B. Two appliances must be available to allow NVMe-vVol migration
- C. NVMe-vVol must be created on internal hosts
- D. Switches must support NVMe/TCP protocol
正解：A
質問 # 30
Which two migration tasks are configured during a non-disruptive import in PowerStore? (Choose two.)
- A. Refresh Volumes
- B. Refresh Hosts
- C. Start Copy
- D. Host Cleanup
正解：A、C
質問 # 31
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
正解：
解説：
1 - add NVMe over TCP Sofware Adapter
2 - Add Host
3 - Add Controller
4 - Add NVMe volume
質問 # 32
Use the simulator to create a new 100 GB volume. Use a category of Other. Associate the new volume with a protection policy that includes a rule that takes a snapshot every hour Monday-Friday and retains it for 5 days.
When you have finished continue to the next question.
正解：
解説：
See explanation below.
Explanation:
質問 # 33
What does setting the alert threshold to 0 (zero) do when configuring replication rules?
- A. Generates an alert if the synchronization time exceeds the RPO.
- B. Enables alerts if the RPO cycle was missed for three consecutive cycles.
- C. Disables all alerts for any missed RPO cycles.
- D. Generates an alert if the data saved during the RPO cycle exceeds 20% of the storage object capacity
正解：A
解説：
Here's a breakdown of how the alert threshold works in PowerStore replication:
RPO (Recovery Point Objective): The RPO defines the maximum acceptable amount of data loss in case of a disaster. It essentially determines how often data is replicated. For example, an RPO of 1 hour means you're willing to lose up to 1 hour's worth of data.
Alert Threshold: This setting allows you to control when PowerStore generates an alert if replication isn't meeting the defined RPO. It's the amount of time the system waits before raising an alert when a replication session fails to meet the RPO.
Threshold 0: When you set the alert threshold to 0, it means that PowerStore will immediately generate an alert if the synchronization time for a replication session takes longer than the RPO. This provides immediate notification of potential issues with replication performance or network connectivity.
Why other options are incorrect:
A . Disables all alerts for any missed RPO cycles: This is incorrect. Setting the threshold to 0 actually makes the system more sensitive to missed RPOs.
B . Generates an alert if the data saved during the RPO cycle exceeds 20% of the storage object capacity: This is not related to the alert threshold setting.
C . Enables alerts if the RPO cycle was missed for three consecutive cycles: The alert threshold doesn't have a built-in mechanism for consecutive missed cycles. It triggers an alert based on the synchronization time exceeding the RPO.
By setting the alert threshold to 0, you ensure that you're immediately notified of any replication delays, allowing you to take corrective action to prevent potential data loss.
質問 # 34
A PowerStore administrator is creating a host group.
Which two protocol types can be selected for a new host group? (Choose two.)
- A. FC
- B. NVMe/TCP
- C. InfiniBand
- D. iSCSI
正解：B、D
質問 # 35
At what point in the configuration of an External Storage import session does the data path from the host to the PowerStore system become the active I/O path?
- A. When the import session begins
- B. As MPIO restarts on the host
- C. Before launching the Import Storage wizard
- D. During the ImportKit installation
正解：A
解説：
https://www.dell.com/support/manuals/en-aw/powerstore-1000/pwrstr-import/overview-of-the-non-disruptive-import-process?guid=guid-b91e4e36-e984-40ae-a484-75d8731926d6&lang=en-us
質問 # 36
The wan connection between the production and DR sites has a low latency of <5 milliseconds.
Which firewall port is used by PowerStore to communicate between sites?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 37
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hoursOT
Retention of 2 daysOT
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
正解：
解説：
see the Explanation for the solution.
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
質問 # 38
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects.
Which two actions could resolve the issue? (Choose two.)
- A. Configure RSTP
- B. Configure LACP
- C. Configure VLT
- D. Configure Dynamic LAG
正解：B、D
質問 # 39
Which statement about File Mobility Network configuration is correct?
- A. File mobility network is created on the same subnet and VLAN as the management network
- B. File mobility network is created under the management tab in PowerStore Manager
- C. File mobility network is created with an optional Cluster IP
- D. File mobility network is created on the same subnet and VLAN. as the storage network
正解：A
質問 # 40
A storage administrator has configured a VNX2 as a remote system.
Which Import External Storage migration architectural components are now established?
- A. Data path and management control path to the access host.
- B. Data path and management control path to the source storage system.
- C. Host iSCSI initiators are registered on the VNX2 storage system.
- D. Host Fibre Channel initiators are deregistered on the VNX2 storage system.
正解：B
解説：
Topic 1,
SIMULATION / Lab Based Questions
質問 # 41
A storage administrator with a small budget must deploy a new scalable block-optimized storage solution requiring NVMe-oF without adding a license.
Which PowerStore configuration would meet the requirements?
- A. 500 X with one expansion enclosure
- B. 500 X with no expansion enclosure
- C. 500 T with one expansion enclosure
- D. 500 T with no expansion enclosure
正解：D
質問 # 42
A storage administrator provisions a VMware file system from a NAS server configured with NFSv4.
What is the access requirement for the ESXi host?
- A. Kerberos with Integrity
- B. Read/Write
- C. Kerberos with Encryption
- D. Read/Write, allow Root
正解：D
質問 # 43
Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.
正解：
解説：
Explanation:
質問 # 44
SIMULATION
A storage administrator needs to group Volume-1 and Volume-2 for consistency. The group should have a snapshot every day that is retained for 25 hours.
Use the simulator to make this configuration change.
When you have finished continue to the next question.
正解：
解説：
See the steps in Explanation
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>Volumesfrom the left menu.
3. SelectVolume-1andVolume-2from the list of volumes and clickGroup.
4. Enter a name for the volume group, such asConsistent-Group, and clickCreate.
5. SelectProtection>Protection Policiesfrom the left menu.
6. Click+ CREATEto launch the Create Protection Policy wizard.
7. Enter a name for the protection policy, such asDaily-Snapshot, and clickNext.
8. Click+ CREATEto create a new snapshot rule for the policy.
9. Enter a name for the snapshot rule, such asDaily-Rule, and clickNext.
10. SelectAll Daysfor the days to run the rule andTime of dayfor the frequency. Enter00:00as the start time and clickNext.
11. Enter25as the retention hours and clickNext.
12. Review the summary and clickFinishto create the snapshot rule.
13. ClickNextto continue the protection policy wizard.
14. Review the summary and clickFinishto create the protection policy.
15. SelectStorage>Volume Groupsfrom the left menu.
16. SelectConsistent-Groupfrom the list of volume groups and clickEdit.
17. ClickProtection Policyand selectDaily-Snapshotfrom the drop-down list. ClickSave.
18. The volume group is now configured with a protection policy that creates a snapshot every day at 00:00 and retains it for 25 hours.
質問 # 45
......
EMC D-PST-DY-23：Dell PowerStore Deploy 2023試験は、Dell PowerStoreソリューションの展開における知識と専門知識を証明したいプロフェッショナル向けに設計されています。この試験は、ハードウェア、ソフトウェア、ネットワーキングなど、Dell PowerStoreインフラストラクチャコンポーネントの計画、実装、管理能力を試験します。
究極の準備用無料ガイドD-PST-DY-23試験問題と解答：https://drive.google.com/open?id=1byCtqyZRbwKSzzUuvArzbEZjESWcmnRJ
合格できるPowerStore Deploy D-PST-DY-23試験問題集には75問があります：https://jp.fast2test.com/D-PST-DY-23-premium-file.html