無料提供されるHPE0-J58問題集とHPE0-J58リアル試験問題
HP HPE0-J58実際の問題とブレーン問題集
質問 43
A customer has two sites within a short distance. They require a primary storage solution which supports automatic failover for their block storage, SMB shares, and NFS home directories. Which HPE solution best fits the customer's requirements?
- A. HPE StoreOnce
- B. HPE Simplivity
- C. HPE Nimble
- D. HPE 3PAR
正解: D
質問 44
A customer has two HPE SPAR arrays with synchronous replication configured.
I he customer established a new location less than 10 km away that will he used for disaster recovery. The data at the disaster location does not need to be as currant as the data at the primary location. The link between the two locations is not reliable during the daytime due to snared bandwidth which replication should you recommend to meet this customer's needs?
- A. Asynchronous Periodic
- B. Synchronous
- C. Asynchronous Streaming
- D. 3DC Peer Persistence
正解: A
質問 45
A customer is experiencing high utilization on their VMware ESXi server NICs when they backup virtual
machines stored on an HPE 3PAR 8200.
Which technology is available on a StoreOnce VSA to reduce the network utilization?
- A. Backup from storage snapshots
- B. Transportable shadow copies
- C. Catalyst target-side deduplication
- D. Adaptive Data Reduction
正解: C
質問 46
A customer has standardized on windows Server for the company's physical server applications. The customer must ensure that applications and storage will move between sites as one during automated or manual failover Which HPE 3PAR integrated solution should you recommend as a preventative measure?
- A. Peer Persistence
- B. Cluster Extension (CLX)
- C. Site Recovery Manager
- D. Service guard Metrocluster
正解: B
質問 47
You are proposing StoreOnce as a new backup target.
Which features should you emphasize that will help the customer protect and recover data from external
attacks on local data? (Select two.)
- A. StoreOnce Catalyst stores are only accessible via the API
- B. StoreOnce has encryption of data at rest and data in-flight
- C. StoreOnce is immune from ransomware
- D. StoreOnce has malware protection
- E. StoreOnce has firewalls to protect the repositories
正解: B,C
質問 48
A customer has two data centers in a metropolitan areA. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
* Transparently and automatically failover and fall back between sites
* Provide block and file access
* Block access must provide connectivity for fibre channel and iSCSi hosts
* All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 20850
- B. HPE 3PAR 9450
- C. HPE 3PAR 20450
- D. HPE 3PAR 8450
正解: D
質問 49
Refer to the exhibit.
A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to...
A junior architect you are coaching created the configuration shown for each array What should you add to me configuration for each array to meet customer performance requirements?
- A. SAS bus multiplexers
- B. 4 additional disk enclosures
- C. 1 additional pair of nodes
- D. 32 additional SSD drives
正解: C
質問 50
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than
1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
- A. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
- B. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
- C. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
- D. The Quorum Witness initiates the fail-over, passing control to the standby array
- E. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
正解: C,E
質問 51
Exhibit.
Based on the environment shown, what should you add to make the environment compliant with the 3-2-1 rule for best practice data protection?
- A. synchronous replication to the tertiary array
- B. an HPE RMC solution with StoreOnce as a target
- C. application aware snapshots with VSS on the tertiary array
- D. VMware vSphere SRM Between the primary and secondary array
正解: B
質問 52
A customer has a solution from another vendor. The customer ran into issues of a disproportionally high failure rate of media keeping logfile dat A.
The issue also appeared in the second array, to which the data is being replicated.
The customer specifically asks you for a solution that will not have this same issue. Which feature of HPE
3PAR arrays should you emphasize?
- A. wide striping data across controllers and disks
- B. ASIC accelerated thin provisioning
- C. creating snapshots on different physical disks
- D. inline compression and data packing
正解: D
質問 53
A customer has an aging Fibre Channel SAN from one vendor and a separate iSCSI SAN from another vendor. The customer wants to upgrade to a single vendor that will allow them to manage the SAN through a single vendor management console.
Which solution should you recommend?
- A. one HPE Nimble Fibre Channel group federated to an HPE 3PAR for iSCSI
- B. one HPE Nimble iSCSI group federated to an HPE 3PAR for Fibre Channel
- C. one HPE Nimble Storage Group that has a Fibre Channel port and a ISCSI pool
- D. one HPE Nimble Storage Fibre Channel Group and one HPE Nimble Storage iSCSI Group
正解: D
質問 54
Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?
- A. automatic recovery of array failure independent of Remote copy topology
- B. support of all Remote Copy topologies
- C. all Remote Copy topologies yield identical RPO and RTO
- D. Remote Copy support up to 100ms latency over all transport layers
正解: B
質問 55
Refer to the exhibit.
A customer asks you to design an HPE 3PAR 9450 solution with 64 3 84 TB SSDs using RAID 6 (6+2). The customer does not want to lose data It an entire drive enclosure Is lost
What must be added to the Bill of Materials shown to meet these requirements?
- A. 8 HPE External 2.0m(6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
- B. 1 HPE 3PAR Policy Manager Software E-LTU
- C. 4 HPE 3PAR 9000 24-disK 2U SFF (2 5ln) SAS Drive Enclosure
- D. 1 HPE 3PAR StoreServ RPS Service Processor
正解: C
質問 56
You are designing a multi-site replication solution using HPE 3PAR storage array. Which key factor should drive you to choose FCIP over an ROP based solution?
- A. amount of data to replicate is low
- B. no host latency impact when using periodic asynchronous replication
- C. network latency exceeds 100 ms
- D. amount of data to replicate is high
正解: A
質問 57
You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated requirement of RPO=0. What is a key consideration you need to explain to the customer?
- A. Host writes can be committed to either primary or backup storage before host acknowledgment
- B. Host write latencies will decrease
- C. Host write latencies will increase
- D. RC sync can only be deployed over FC links
正解: C
質問 58
Refer to the exhibit.
A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to...
A junior architect you are coaching created the configuration shown for each array
What should you add to me configuration for each array to meet customer performance requirements?
- A. SAS bus multiplexers
- B. 4 additional disk enclosures
- C. 1 additional pair of nodes
- D. 32 additional SSD drives
正解: C
質問 59
Refer to the exhibit.
A customer is planning a new compute cluster. They require business continuity, and they need automatic transparent failover between sites with an RPO of 0.
You propose HPE 3PAR 9450 arrays at each site. The displayed Bill of Materials (BOM) shows the hardware and software components for one site.
What must be added to the BOM at each site to build the solution?
- A. one HPE 3PAR Policy Manager Software license
- B. four additional HPE 3PAR 9000 4-port 16Gb Fiber Channel Host Bus Adapters
- C. two additional HPE 3PAR 9000 2-port 10Gb Ethernet Host Bus Adapters
- D. one HPE 3PAR All-inclusive Multi-system Software Suite
正解: A
質問 60
You are comparing Nimble features with other vendors. What should you point out to a customer regarding investment protection?
- A. proprietary Linux OS
- B. scaling In three dimensions
- C. choice of industry-standard RAID levels
- D. unlimited snapshots
正解: B
質問 61
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of two minutes
- B. They have an RPO of four minutes
- C. They need to verify the RPO level from the host vc-ms-fileserver
- D. They need to send a screenshot of the volumes tab
正解: B
質問 62
A customer's fabric consists of HPE B-Series switches running Fabric OS 7.4. The customer recently closed a second datacenter and needs to repurpose the hpe c-series switches that were used at the second site.
What should you do to meet the customer's needs and maintain full fabric functionality?
- A. connect the B-series switch based fabric and the c-series switch based fabric with DWDM.
- B. Connect the B-series switch based fabric and the C-series switch based fabric, and use FC-FC routing
- C. Enable interaparatibility mode on both B-series and C series switches, and connect them together directly to form a single fabric
- D. Create a SAN with one fabric containing B-series switches only and a second fabric containing C-series switches only. Connect end devices to both
正解: C
質問 63
For customers, what are the benefits of developing a company compliance policy? (Select two.)
- A. reduced head count
- B. improved security
- C. minimized losses
- D. increased time to market
- E. improved agility
正解: B,C
質問 64
......
HPE0-J58合格させる問題集でHP24時間で試験合格できます：https://jp.fast2test.com/HPE0-J58-premium-file.html
最新問題を使おうHPE0-J58試験問題と解答PDFで一年間無料更新：https://drive.google.com/open?id=1jXAgyi9IBZSXJPlJ9rOQAg669-7X8iqX