無料セールまもなく終了！100%有効HPE6-A73試験問題集に124問題と解答が待ってます
検証済みHPE6-A73問題集と解答であなたを合格確定させるAruba Certified Switching Professional (ACSP) V1試験解答！
質問 69
An administrator is managing a pair of core AOS-CX switches configured for VSX Connected to this core are pairs of aggregation layer AOS-CX switches configured for VSX.OSPF is running between theaggregation and core layers To speed up OSPF convergence, the administrator has configured BFD between the core and aggregation switches.
What is a best practice the administrator should implement to reduce CPU processing on the switches if a BFD neighbor fails?
- A. Increase the VSX keepalive timer
- B. Implement graceful restart
- C. Disable ICMP redirects
- D. Increase the BFD echo timers.
正解: C
質問 70
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 1 to Client 1
- B. Server 2 to Client 2
- C. Client 3 to Client 2
- D. Client 1 to Client 3
- E. Client 1 to Client 2
正解: A,E
質問 71
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
- B. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- C. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- D. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
正解: C
解説:
People seem to be confused by inverted mask/wildcard masks. They would be correct for Cisco switches, but AOS-CX does NOT use wildcard masks; "AOX-CX switches do not support wildcard masks - only prefixes or subnet masks - when created ACEs." Cisco: 255.0.255.0 = xx.123.xx.123 AOS-CX: 255.0.255.0 = 123.xx.123.xx
質問 72
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192 168 1 5
- B. 192 1684 5
- C. 192 168 3 5
- D. 192 168 2 5
正解: C
質問 73
A network administrator wants to replace older access layer switches with AOS-CX 6300 switches.
Which virtual switching technology can the administrator implement with this solution?
- A. Only Backplane stacking
- B. Only VSX
- C. Only VSF
- D. Both VSF and VSX
正解: C
質問 74
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?
- A. Uses the same management protocol as Aruba APs
- B. Uses IPSec to protect the management traffic
- C. Uses IPSec to protect the management and data traffic
- D. Supports only port-based tunneling
正解: D
質問 75
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?
- A. The number of scripts or agents has exceeded the hardware's capabilities
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. The administrator does not have the appropriate credentials to interact with NAE
- D. A connectivity issue exists between NAE and the AOS-CX switch
正解: D
質問 76
When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?
- A. Syntax validation
- B. Semantic validation
- C. Conformance validation
- D. Change validation
正解: D
解説:
Validation processes
+ Syntax validation
- When: while typing
- What: command syntax including in-line help
+ Semantics validation
- When: VALIDATE button (in multi-editor) or before DEPLOY
- What: configuration consistency
+ Conformance validation
- When: while editing
- What: compliance with conformance rules: corporate policies, minimum connectivity requirements, etc.
+ Change validation
- When: during DEPLOY (before and after configuration deployment)
- What: compares device state before and after changes are applied (using show commands)
質問 77
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)
- A. Create a stack of AOS-CX switches.
- B. Transfer files between the switch and your mobile device.
- C. Use NetEdit to manage switch configuration.
- D. Schedule an operating system upgrade.
- E. Securely access the switch using SSH.
正解: A,B
解説:
ACSP Study Guide Page 66 - Key Features (Transfer files between the switch and your mobile device)
質問 78
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. User-based tunneling (UBT)
- B. OSPF route maps using the "set metric" command
- C. Policy-based routing (PBR)
- D. Classifier policies
正解: C
質問 79
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. AS path length
- B. Multiple exit discriminator
- C. Weight
- D. Local preference
正解: B
質問 80
Examine the AOS-CX configuration:
The switches have a default factory password setting NetEdit fails to access the configuration of the AOS-CX switches. What should the administrator do to solve this problem?
- A. Disable telnet globally.
- B. Use the default VRF instead of the mgmt VRF
- C. Enable IP routing globally
- D. Set a password for the default admin user account.
正解: C
質問 81
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
- B. Remove a script that is no longer used before installing the new script
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Install the script's signature before installing the new script
正解: B
質問 82
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit.
How should the administrator purchase and/or install the NetEdit solution?
- A. Installed on a supported version of RedHat Enterprise Linux
- B. Installed on a supported version of Debian Linux
- C. Install as a hardware appliance
- D. Installed in a virtualized solution by using the Aruba-supplied OVA file
正解: D
質問 83
Examine the following ACL rule policies:
Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere
Permit traffic from 10.2.2.40 through 10.2.2.55 to anywhere
Deny all others
Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.
- A. permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any - B. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.0 255.255.255.192 any - C. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any - D. deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
正解: B
質問 84
A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.
What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?
- A. Both ASBRs should define External Type 2 routes for the
- B. Both ASBRs should define External Type 1 routes for the
- C. Both ASBRs should define External Type 1 routes for the
- D. Both ASBRs should define External Type 2 routes for the
正解: C
質問 85
Which concept is implemented using Aruba's dynamic segmentation?
- A. Zero Touch Provisioning
- B. Device fingerprinting
- C. Colorless port
- D. Root of trust
正解: B
質問 86
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. User-based tunneling (UBT)
- B. OSPF route maps using the "set metric" command
- C. Policy-based routing (PBR)
- D. Classifier policies
正解: A
質問 87
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)
- A. On the source AOS-CX switch, the destination specified is the administrator's desktop
- B. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
- C. The encapsulation protocol used is GRE
- D. The encapsulation protocol used is VXLAN
- E. The encapsulation protocol is UDP
正解: B,C
解説:
In AOS CX the remote mirroring is done using a tunnel interface, so the Mirror source and destination must be configured on each Switch. On the source Switch, the source interface (from where the traffic is mirrored) and destination interface (the tunnel interface to where the traffic is sent to). In the destination Switch, the source interface (which would be the tunnel interface (receiving the traffic from the source switch tunnel)) and the destination would be the client where Wireshark enabled client is connected.
質問 88
......
HP HPE6-A73 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
HPE6-A73試験問題集で100%合格率HPE6-A73試験：https://jp.fast2test.com/HPE6-A73-premium-file.html
試験問題集リアルAruba Certified Switching Professional (ACSP) V1問題集124問題と解答が待ってますを試そう：https://drive.google.com/open?id=1yuAUe48TqurwNO1zJ1AxpE78L9FeHloG