最上級のHPE6-A73試験問題HPテスト最高成績で最速合格をゲットせよ！ [Q55-Q77]

最上級のHPE6-A73試験問題HPテスト最高成績で最速合格をゲットせよ！

試験準備には最適なHPE6-A73試験問題2024年最新のAruba Certified Switching Professional (ACSP) V1究極な124問があります

質問 # 55
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit How should theadministrator purchase and/or install the NetEdit solution?

A. Installed on a supported version of RedHat Enterprise Linux
B. Installed on a supported version of Debian Linux
C. Installed in a virtualized solution by usung the Aruba-supplied OVA file
D. Install as a hardware appliance

正解：C

質問 # 56
An administrator has an AOS-CX switch configured with:
router ospf 1
area 0
area 1 stub no-summary
It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1.
The current routes in each area are:
Area 0: 5 routes (LSA Type 1 and 2)
Area 1: 10 routes (LSA Type 1 and 2)
External routes: 2 (LSA Type 5)
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?

A. 0
B. 1
C. 2
D. 3

正解：B

質問 # 57
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?

A. Provides surge protection for PoE and non-PoE ports
B. Requires NetEdit to implement
C. Supports all AOS-CX switches
D. Provides up to 60W of power per port

正解：D

質問 # 58
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?

A. Uses IPSec to protect the management traffic
B. Uses iPSec to protect the management and data traffic
C. Uses the same management protocol as Aruba APs
D. Supports only port-based tunneling

正解：C

質問 # 59
Examine the attached exhibit.

The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?

A. Bidirectional forward detection (BFD)
B. OSPFv3
C. Virtual links
D. Not-so-stubby areas

正解：C

質問 # 60
A network administrator wants to replace older access layer switches with AOS-CX 6300 switches.
Which virtual switching technology can the administrator implement with this solution?

A. Only VSX
B. Both VSF and VSX
C. Only VSF
D. Only Backplane stacking

正解：C

質問 # 61
An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

A. access-list ip server 10 permit tcp any web-servers group web-ports
B. access-list ip server 10 permit tcp any web-servers web-ports
C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
D. access-list ip server 10 permit tcp any group web-servers group web-ports

正解：B

質問 # 62
Examine the following AOS-CX switch configuration:

Which statement correctly describes what is allowed for traffic entering interface 1/1/3?

A. IP traffic from 10 1 12 0/24 is allowed to access 172.0.1.0/23.
B. IP traffic from 10 1 110/24 is allowed to access 10.1.110.0/24.
C. Traffic from 10 0 12 0/24 will generate a log record when accessing 10.0.11.0/24.
D. IP traffic from 10 011 0/24 is allowed to access 10.112.0/24.

正解：D

質問 # 63
A company is implementing a new wireless design and needs it to support high availability even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?

A. AOS-CX 8325 and VSF
B. AOS-CX 8400 and VSX
C. AOS-CX 6300 and VSF
D. AOS-CX 6400 and VSX

正解：C

質問 # 64
How is voice traffic prioritized correctly on AOS-CX switches?

A. By implementing weighted fair queueing (WFQ)
B. By defining device profiles with QOS settings
C. By placing it in the strict priority queue
D. By implementing voice VLANs

正解：D

質問 # 65
A network engineer is setting up BGP on AOS-CX switches. The engineer is establishing two different eBGP peering's to two different service providers. The engineer has dozens of contiguous C-class public networks that need to be advertised to the two service providers. The engineer manually defines the networks to be advertised individually with the "network" command.
How can an administrator advertise only a summarized route to the two service providers?

A. Create a summarized static route and redistribute this into OSPR
B. Create a summarized route in OSPF
C. Summarize the networks with the "aggregate-address" BGP command
D. Enable auto-summarization in the IPv4 address family of the BGP configuration

正解：C

質問 # 66
An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

A. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
B. access-list ip server 10 permit tcp any web-servers web-ports
C. access-list ip server 10 permit tcp any web-servers group web-ports
D. access-list ip server 10 permit tcp any group web-servers group web-ports

正解：C

質問 # 67
A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.
Which type of licensing should be used by this customer?

A. 20 Aruba NetEdit permanent licenses
B. 1 Aruba NetEdit SMB License
C. 20 Aruba NetEdit single node subscription licenses
D. 25 Aruba NetEdit permanent licenses

正解：C

質問 # 68
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?

A. User-based tunneling
B. RADIUS dynamic authorization
C. Downloadable user roles
D. IPSec

正解：B

質問 # 69
What is true regarding VSX and keepalives on AOS-CX switches?

A. A separate VLAN on the ISL link is used.
B. A 1GbE or faster port is used.
C. A VSX LAG for the keepalives is a best practice.
D. The OOBM port must be used.

正解：B

質問 # 70
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
Switch# show port-access role clearpass
Role information:
Name : icxarubadur_employee-3044-2
Type : clearpass
Status: failed, parsing_failed
Reauthentication Period :
Authentication Mode :
Session Timeout :
The downloadable user roles are not being downloaded to the AOS-CX switch. Based on the above output, what is the problem?

A. The certificate that ClearPass uses in invalid
B. The AOS-CX switch does not have the ClearPass certificate involved
C. DNS fails to resolve the ClearPass server's FQDN
D. There is a date/time issue between the ClearPass server and the switch

正解：A

質問 # 71
Examine the following AOS-CX configuration:

Based on this configuration, which statement is correct regarding IoT traffic?

A. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
B. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch

正解：A

質問 # 72
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?

A. Enable trust settings for the AOS-CX switch's SSL certificate
B. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
C. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
D. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch

正解：B

質問 # 73
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?

A. User-based tunneling
B. Downloadable user roles
C. RADIUS dynamic authorization
D. IPSec

正解：A

質問 # 74
Examine the attached diagram

Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?

A. Server 1 and Server 2 can communicate with each other via the core layer.
B. Server 2 cannot access the core layer.
C. Server 2 can successfully access the core layer via the keepalive link.
D. Server 1 can access the core layer via both uplinks.

正解：A

質問 # 75
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?

A. IP protocol 50 and UDP 8209
B. UDP 4500 and UDP 8209
C. UDP 8211 and IP protocol 47
D. UDP 4500 and IP protocol 47

正解：D

質問 # 76
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?