ベストな準備プラン3V0-21.23試験2025年最新のVCAP-DCV Design無制限94問題
注目すべき時短になる3V0-21.23オールインワン試験ガイド
VMware 3V0-21.23 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 38
An architect is designing storage for a new vSphere environment to meet the following requirements:
- Asynchronous replication is required between two sites.
- The impact on the storage layer should not impact the performance of the compute layer.
- Each application tier will require different replication attributes.
- Virtual machine live migration across compute and storage must be supported.
- Virtual machine aware back up will be leveraged.
- Operational management overhead should be minimized.
- Operational automation should be supported.
Which storage design recommendations would meet the requirements?
- A. Two new storage arrays will be deployed, one at either site.
vSphere Volumes (vVOLs) will be used to provide policy-based management for each application tier.
Data replication will be offloaded to the new arrays. - B. Two new Fibre Channel storage arrays will be deployed, one at either site.
Each application tier will be initially provisioned a new LUN.
Data replication will be offloaded to the new arrays. - C. Two new vSphere clusters enabled with vSAN will be deployed, one at either site.
vSAN will be used to provide policy-based management for each application tier.
vSphere Replication will be used to replicate the virtual machine data in an asynchronous configuration. - D. Two new ISCSI storage arrays will be deployed, one at either site.
Each application tier will be initially provisioned a new LUN.
Data replication will be offloaded to the new arrays.
正解：A
解説：
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/virtualvolumes/v mw-vsphere-virtual-volumes-vvolvs-solution-overview.pdf
質問 # 39
An architect is designing a VMware solution for a customer based on the following information:
- The solution must use investments in existing storage array that supports both block and file storage.
- The solution must support the ability to migrate workloads between hosts within a cluster.
- The solution must support resource management priorities.
- The solution must support the ability to connect virtual machines directly to LUNs.
- The solution should use existing IPv4 based network infrastructure.
- There is no budget for additional physical hardware.
Which two design decisions could the architect make to meet these requirements- (Choose two.)
- A. The ESXi hosts will leverage iSCSI
- B. The ESXi hosts will leverage Fibre Channel over Ethernet (FCoE)
- C. The ESXi hosts will leverage NFS 3
- D. The ESXi hosts will leverage NFS 4.1
- E. The ESXi hosts will leverage Fibre Channel (FC)
正解：A、C
解説：
FC is not IP
NFS4.1 does not support I/O control
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-
8A929FE4-1207-4CC5-A086-7016D73C328F.html
Starting from vSphere 7.0, VMware no longer supports software FCoE in production environments.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-
6B49866F-7005-4099-84AC-4FB2A1A91F64.html
質問 # 40
An architect is tasked with designing a new VMware software-defined data center (SDDC) using VMware vSAN. The architect uses a storage assessment tool to determine the storage requirements for the new vSAN cluster. The new SDDC is going to be deployed into the existing data center and must be connected to a shared core network switch.
The architect decides to use vSAN ReadyNodes with the following configuration:
Two disk groups with:
- Write Intensive NVMe 800 GB drive for cache
- Four 3.84 TB Mixed Use NVMe for capacity
- Four 10 GbE ports
Which element represents a risk that should be included in this design?
- A. The existing network is 10 GbE capable
- B. The use of vSAN ReadyNodes
- C. The number of 10 GbE capable ports in the vSAN ReadyNode
- D. The use of NVMe drives for cache and capacity
正解：A
質問 # 41
An architect is tasked with designing the VMware Validated Solutions in an existing VMware Cloud Foundation environment.
The design must meet the following requirements:
Must not allow logical networks to span physical network boundaries or locations Must support static routing What should the architect recommend based on these requirements?
- A. VLAN-backed NSX segments
- B. A dedicated NSX segment configured manually
- C. A dedicated distributed virtual switch and dedicated port groups
- D. Overlay-backed NSX segments
正解：A
解説：
VLAN-backed NSX segments meet the requirement of ensuring that logical networks do not span physical network boundaries because VLANs are inherently limited to a single physical network segment. Each VLAN maps to a specific Layer 2 broadcast domain and can be isolated to particular physical network segments, ensuring that no logical network spans across physical boundaries. Additionally, static routing is supported with VLAN-backed segments, providing the flexibility needed to configure routing between different subnets or networks.
質問 # 42
Which requirement is essential to ensure that the system can handle its intended workload without performance degradation?
- A. Performance requirements
- B. Capacity requirements
- C. Compute requirements
- D. SLA requirements
正解：A
質問 # 43
An architect is reviewing the security and compliance requirements for a new application that will be hosted on a vSphere 8 environment.
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SAN Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machines The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
- A. External Key Management Service (KMS) provider
- B. A new encrypted iSCSI LUN
- C. A new local VMFS volume
- D. VMware vSAN
- E. Virtual Machine Encryption
- F. The vSphere Native Key Provider
正解：A、E、F
解説：
Virtual Machine Encryption
To ensure that the application's confidential data is protected, Virtual Machine Encryption should be applied.
This will ensure that even if someone gains access to the storage layer or the underlying infrastructure, the data in the virtual machine is encrypted and cannot be accessed outside of the VM, as required by the security and compliance requirements.
The vSphere Native Key Provider
The vSphere Native Key Provider can be used to manage encryption keys within the vSphere environment.
Since no budget is available for additional infrastructure components or software, leveraging vSphere's native capabilities for key management ensures that encryption is securely handled without introducing external dependencies. This also aligns with the requirement to not introduce additional infrastructure.
External Key Management Service (KMS) provider
While the vSphere Native Key Provider can manage keys within the environment, if there is a requirement for a more secure or compliant key management solution, an External Key Management Service (KMS) may be used. The KMS provider allows for centralized management of encryption keys, ensuring that the keys are securely stored and controlled according to compliance standards (e.g., FIPS 140-2). Although the Native Key Provider may suffice, this option ensures that key management adheres to stricter compliance needs, especially for confidential data.
質問 # 44
An organization's existing vSphere environments are configured for Enhanced Linked Mode. The DevOps team automates the creation of hardened virtual machine images for various operating systems. Their continuous integration/continuous delivery (CI/CD) pipeline runs a task at the end of a successful build, which uploads the Open Virtualization Format (OV) image to a sandbox content library, deploys a virtual machine from the image, and then destroys these objects after quality checks are complete.
The following requirements have been noted:
- All content libraries and images must be centrally created and managed.
- All images must be capable of being updated.
- All images must be refreshed and available to subscribed libraries within 24 hours.
- All images must provide details of the image contents and versions.
- All images must be capable of being reverted to a previous version.
- All images must be capable of having the hardware and guest operating system customized during deployment.
Which three recommendations should the architect make to design a content library solution that will meet these requirements- (Choose three.)
- A. Edit the Auto Sync Refresh Interval advanced setting for each subscribed library.
- B. Create and publish a new subscription to a new subscriber library for each target vSphere environment.
- C. Deploy the OVF images to vSphere and clone as an OVF template to a local content library.
- D. Create a local content library in the primary vSphere environment and enable publishing.
- E. Add a new subscriber library from each vSphere environment.
- F. Deploy the OVF images to vSphere and clone as a VM template to a local content library.
正解：D、E、F
解説：
As only VM templates can be edited and keep different versions.
質問 # 45
A VMware Service Provider is tasked with delivering a solution for continuous availability for a subset of Tier 1 virtual machines (VMs) and vApps running in their vSAN environment. The VMs make up a mission-critical application and there can be no data loss in the event of an outage at their primary data center.
In the event of a regional outage, they have established a 10-minute recovery point objective (RPO).
Failover/failback to the third site must be automated.
They have the following in place:
- Two local data centers (primary and secondary) connected with 100 Gb dedicated fiber
- 2ms round-trip time (RTT) latency between the sites
- A third data center located on another power grid
- 70ms latency between the primary and secondary data centers
- Matching storage arrays at all locations.
Which two solutions could be used to meet the requirements? (Choose two.)
- A. vSphere Data Protection
- B. Snapshots
- C. vStorage APIs for Array Integration (VAAI)
- D. Site Recovery Manager
- E. vSAN Metro Cluster
正解：D、E
質問 # 46
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
- The solution must initially support the concurrent running of 300 production and 600 development virtual machines.
- The production environment should be delivered across two geographically dispersed data centers.
The development environment must be vSphere-based but does not have to be deployed on-premises.
- The two data centers are connected to each other through multiple diversely routed, high bandwidth and low latency links.
- The customer's server hardware standard document states that all virtual infrastructure hosts must be based on blade architecture only.
- The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities, such as the monthly software patching and ad-hoc hardware break/fix.
- All virtual machine backups must be completed using the existing backup service.
- The recovery time objective (RTO) for the service is four hours.
- The recovery point objective (RPO) of the service is 24 hours.
Given the information from the customer, which two would be classified as assumptions within the design? (Choose two.)
- A. The customer will update their hardware standard to support rack mount servers
- B. The backup service will store data in a secure facility
- C. The clusters will have a minimum redundancy of N+1
- D. All virtual machines will be deployed with the same resource profile for production and development
- E. The backup service has sufficient capacity for the new requirements
正解：C、E
質問 # 47
An architect is responsible for the availability design of a solution.
The following information has been provided:
Virtual machines (VMs) run 8 or less vCPUs
All hosts have a minimum of two NICs per vSphere distributed switch (VDS) connected to separate physical switches All hosts have a minimum of two host bus adapters (HBAs) connected to separate physical switches Which three options maximize VM availability in the event of an ESXi host failure? (Choose three.)
- A. vSphere Round Robin storage multi-pathing policy set on each ESXi host
- B. vSphere Fault Tolerance configured on the virtual machines
- C. vSphere NIC Teaming policy: Route based on originating port ID set on the distributed port group
- D. VMware Tools configured to automatically update on reboot for all virtual machines
- E. vSphere High Availability Restart Priority set to default at the cluster level
- F. Dynamic Link Aggregation (LACP) configured on the distributed virtual switch
正解：A、B、E
質問 # 48
Which requirement would be classified as a functional requirement within the application design documentation?
- A. The application must be capable of handling 200 transactions per second.
- B. The application must be hosted with redundancy levels of N+1 or better.
- C. Penetration testing must be executed quarterly with a pass rate of 80% or higher.
- D. Administrators must monitor the network traffic of the desired systems.
正解：D
質問 # 49
An architect is designing a vSphere environment for a customer and learns that the customer has:
- A single vSphere cluster
- Two storage arrays with different RAID capabilities.
Which two design decisions should the architect make to maximize data availability and data performance for this customer? (Choose two.)
- A. Use Storage DRS.
- B. Use VM to host DRS rules.
- C. Use a minimum of three storage arrays.
- D. Use VMDK anti-affinity rules.
- E. Use multiple datastores for heartbeat.
正解：A、D
質問 # 50
An architect is tasked with designing the implementation of the VMware Validated Solutions in an existing VMware Cloud Foundation environment that includes:
Intelligent Operations Management
Intelligent Logging and Analytics
Which two design elements must the architect include in the design to be able to accomplish the deployment of these two solutions? (Choose two.)
- A. vSAN Stretched Cluster
- B. NSX Federation
- C. vSphere Lifecycle Manager
- D. Application Virtual Network (AVN)
- E. NSX Edge Cluster
正解：C、E
解説：
vSphere Lifecycle Manager:
vSphere Lifecycle Manager (vLCM) is essential for ensuring that the VMware Cloud Foundation (VCF) environment is consistently managed and updated. Intelligent Operations Management and Intelligent Logging and Analytics require a well-integrated and managed infrastructure. vLCM automates the lifecycle management of vSphere clusters, ensuring that all components are compliant and correctly configured, which is critical for the deployment of VMware Validated Solutions.
NSX Edge Cluster:
An NSX Edge Cluster is necessary to provide networking services, including routing and firewalling, for the VMware Cloud Foundation environment. These solutions, especially those focusing on Intelligent Operations Management and Intelligent Logging and Analytics, typically rely on NSX for network segmentation, security, and operational insights. The NSX Edge Cluster is required for these networking functionalities to integrate properly into the architecture.
質問 # 51
An architect is documenting the design for a new multi-site vSphere solution. The customer has informed the architect that the workloads hosted on the solution are managed by application teams, who must perform a number of steps to return the application to service following a failover of the workloads to the secondary site.
These steps are defined as the Work Recovery Time (WRT). The customer has provided the architect with the following information about the workloads:
Critical workloads have a WRT of 12 hours
Production workloads have a WRT of 24 hours
Development workloads have a WRT of 24 hours
All workloads have an RPO of 4 hours
Critical workloads have an RTO of 1 hour
Production workloads have an RTO of 12 hours
Development workloads have an RTO of 24 hours
The customer has also confirmed that the Disaster Recovery solution will not begin the recovery of the development workloads until all critical and production workloads have been recovered at the secondary site.
What would the architect document as the maximum tolerable downtime (MTD) for each type of workload in the design?
- A. Critical Workloads: 16 hoursProduction Workloads: 28 hoursDevelopment Workloads: 28 hours
- B. Critical Workloads: 12 hoursProduction Workloads: 24 hoursDevelopment Workloads: 24 hours
- C. Critical Workloads: 13 hoursProduction Workloads: 36 hoursDevelopment Workloads: 60 hours
- D. Critical Workloads: 13 hoursProduction Workloads: 36 hoursDevelopment Workloads: 48 hours
正解：C
質問 # 52
An organization's data scientists are executing a plan to use machine learning (ML). They must have access to graphical processing unit (GPU) capabilities to execute their computational models when needed. The solutions architect needs to design a solution to ensure that GPUs can be shared by multiple virtual machines.
Which two solutions should the architect recommend to meet these requirements? (Choose two.)
- A. AMD MxGPU
- B. vSphere Bitfusion
- C. vSGA
- D. vSphere DirectPath I/O
- E. NVIDIA vGPU
正解：B、E
質問 # 53
Refer to the exhibit. During a requirements gathering workshop, a customer shares the following diagram regarding their availability service-level agreements (SLAs):
The customer states that there is no application level availability for legacy applications.
Which recommendation could the architect make to meet the customer's high availability requirements for the legacy applications virtual machines?
- A. Achieve application availability with snapshots
- B. Enable vSphere HA and add a VM Override with VM Restart Priority set to Disabled
- C. Enable vSphere HA and add a VM Override with VM Restart Priority set to Lowest
- D. Enable Fault Tolerance
正解：D
質問 # 54
A new real-time financial service application is being developed by the engineering team at a financial firm and will be released as a public Software-as-a-Service (SaaS) offering. The solutions architect has designed and deployed a new vSphere environment and the supporting network infrastructure for hosting all public services. ESXi hosts are configured to use Precision Time Proalhazi@1tocol (PTP) and a local stratum-1 network time server.
Application provisioning and scaling will be managed by VMware vRealize Automation and can be run on Microsoft Windows or multiple distributions of Linux.
Which three recommendations should the architect include in the design to ensure that the service maintain timekeeping within an accuracy of one second? (Choose three.)
- A. Set the virtual hardware device to use Host System Time (NTP) for each virtual machine running the application.
- B. Use a Linux distribution as the guest operating system.
- C. Add a precision clock virtual device to each virtual machine running the application.
- D. Add a virtual watchdog timer (VWDT) device to each virtual machine running the application.
- E. Configure the chrony time-sync agent on each virtual machine guest operating system.
- F. Use Microsoft Windows Server as the guest operating system.
正解：B、C、E
質問 # 55
An architect is tasked with designing the implementation of the VMware Validated Solutions in an existing VMware Cloud Foundation environment that includes:
Intelligent Operations Management
Intelligent Logging and Analytics
Which two design elements must the architect include in the design to be able to accomplish the deployment of these two solutions? (Choose two.)
- A. vSAN Stretched Cluster
- B. NSX Federation
- C. Application Virtual Network (AVN)
- D. vSphere Lifecycle Manager
- E. NSX Edge Cluster
正解：C、E
質問 # 56
An architect is documenting the logical design for a new vSphere solution. The following requirements have been provided to the architect by the customer for the design:
The solution must be deployed in two locations: DC1 and DC2
The solution must limit the impact radius of accidental changes by administrators The solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24 hours The solution must allow workloads to run in both DC1 and DC2 during normal operations The solution must allow workloads to be moved bi-directionally between DC1 and DC2 The solution must use hyper-converged infrastructure for the virtual machine storage The customer has also confirmed that the network connection between DC1 and DC2 has a 10 Gbps bandwidth with a maximum round trip latency of 4 ms.
The architect recommends the following design decision:
Use separate clusters in DC1 and DC2 to form a multi-region design
What should the architect include as justification for this design decision?
- A. Sufficient capacity must be deployed in both DC1 and DC2 to support all running virtual machines.
- B. The network connection between DC1 and DC2 does not support the use of stretched clusters.
- C. Using separate clusters is the only configuration available that supports the RTO of four (4) hours.
- D. Using separate clusters mitigates the risk of an accidental change at the cluster level in DC1 from impacting DC2.
正解：D
解説：
Separate clusters in DC1 and DC2 provide logical isolation between the two data centers. This means that an accidental change or misconfiguration in one cluster (e.g., DC1) will not affect the other cluster (e.g., DC2).
This isolation meets the customer's requirement to limit the impact radius of accidental changes by administrators. By having separate clusters, the risk of cross-site or cross-cluster disruptions is minimized, ensuring better fault tolerance and administrative control.
質問 # 57
An architect has made the following assumptions:
The customer will provide licensing for the vSphere platform.
The storage hardware has sufficient capacity for future workload scale.
The data center offers sufficient power, cooling and rack space for workload scale.
Which two risks must be documented in the design document in response to these assumptions? (Choose two.)
- A. The licenses provided by the customer only have support entitlement for one year.
- B. The storage may not have capacity to accommodate 20% year over year virtual machine growth.
- C. The customer may not have sufficient data center cooling, power, and physical rack space available.
- D. The assumptions must be approved by the customer, architect and the architect's company.
- E. The customer may not have an existing licensing subscription that covers features the architect intends to use.
正解：B、E
解説：
The storage may not have capacity to accommodate 20% year-over-year virtual machine growth.
This is a risk because, while the assumption is that the storage hardware has sufficient capacity, there is a possibility that the hardware may not be able to support future growth, especially if the customer's workload grows faster than expected. Documenting this risk ensures that the design considers potential capacity constraints.
The customer may not have an existing licensing subscription that covers features the architect intends to use.
This is a risk because although the assumption is that the customer will provide licensing, there may be discrepancies between the features required for the design and the customer's existing licensing. This risk ensures that the architect verifies that the customer's licensing aligns with the solution requirements.
質問 # 58
An architect is designing the datastore configuration of a new vSphere-based solution.
The following information was obtained during the initial meeting with the customer:
There is currently 500 production and DMZ virtual machine workloads spread evenly across the primary and secondary site.
The profile of the workloads (per site) is as follows:
- DMZ:
-- 75 x Small: 1 vCPU, 2GB RAM, 200 GB disk
- Production:
-- 50 x Small: 1 vCPU, 2 GB RAM, 200 GB disk
-- 100 x Medium: 2 vCPU, 4 GB RAM, 200 GB disk
-- 25 x Large: 4 vCPU, 8 GB RAM, 500 GB disk
The average IO Profile per workload is 70/30 read/write.
The solution should cater to 10% storage growth in the first year.
The solution should cater to 15% virtual machine snapshot overhead.
The storage team has confirmed:
- A scalable external storage array has been deployed per site to support the storage requirements.
- The storage array will connect to all hosts using a dedicated Fibre Channel storage area network fabric.
- Usable storage capacity is available in 10 TB LUNs.
- As many LUNs as required can be provided.
- Every effort should be made to ensure the number of required LUNs is minimized.
The security team has stated that all DMZ and production workloads must remain logically isolated from each other.
Given the information provided, which three design decisions should the architect make to meet the requirements? (Choose three.)
- A. Each 10TB LUN will be configured as a VMFS datastore.
- B. Six 10TB VMFS datastores will be configured on each site for all production workloads.
- C. Seven 10TB VMFS datastores will be configured on each site for all workloads.
- D. Four 10TB VMFS datastores will be configured on each site for all production workloads.
- E. Each 10TB LUN will be configured as an NFS datastore.
- F. Two 10TB VMFS datastores will be configured on each site for all DMZ workloads.
正解：A、B、F
解説：
Six 10TB VMFS datastores will be configured on each site for all production workloads.
This choice is based on the need to distribute production workloads across multiple datastores while ensuring that each datastore is large enough to accommodate the space required by the workloads. Given the average sizes of the virtual machines and the growth and snapshot overhead, six 10TB VMFS datastores would be appropriate for production workloads, ensuring scalability while minimizing the number of LUNs.
Each 10TB LUN will be configured as a VMFS datastore.
VMFS (Virtual Machine File System) is the standard choice for vSphere environments when using Fibre Channel LUNs. It provides the necessary features, such as concurrency and high-performance access, for production workloads. This option is appropriate given that the storage array uses Fibre Channel for connection and VMFS is the standard file system for such configurations.
Two 10TB VMFS datastores will be configured on each site for all DMZ workloads.
The DMZ workloads are smaller in number and storage requirements compared to the production workloads, so configuring two 10TB VMFS datastores for DMZ workloads will provide enough capacitywhile maintaining logical isolation. This approach also minimizes the number of LUNs required to meet the storage growth needs.
質問 # 59
An architect is designing a new backup solution for a vSphere platform that has been recently upgraded to vSphere 7.
The architect wants the backup solution to perform the following:
- Full virtual machine image backup and restore
- Incremental virtual machine image backup and restore
- File level backup and restore within both Windows and Linux virtual machines
- LAN-free backup
Which functional requirement should the architect include in the design of the new backup solution?
- A. The backup solution must leverage the VMware Consolidated Backup (VCB) framework.
- B. The backup solution must leverage virtual machine snapshots.
- C. The backup solution must leverage VMware vSphere Storage APIs - Data Protection.
- D. The backup solution must leverage VMware vStorage APIs for Data Protection (VADP).
正解：C
解説：
https://kb.vmware.com/s/article/1021175
VCB and VDP are EOL and no longer supported.
質問 # 60
An architect is finalizing the design for a new vCenter Server High Availability deployment.
What is one thing the architect must document in the design?
- A. The vCenter Management Network IPv4 addresses for the witness node vCenter Server
- B. The details of each of the vCenter Server licenses for active, passive and witness nodes
- C. The load balancing algorithm used by the Management Distributed Virtual Switches (DVS)
- D. The SSH configuration settings for the vCenter Server's active node
正解：D
質問 # 61
An architect is designing a new greenfield environment with 600 ESXi hosts in an automated fashion. The engineering department already has a PXE Boot server, TFTP server, and DHCP server set up with an NFS mount for their current Linux servers.
The architect must be able to demonstrate and meet a security requirement to have all infrastructure processes separated.
Which recommendation should the architect make for the ESXi host deployment?
- A. Ask the business to expand the engineering environment to service the virtual environment as well
- B. Request an isolated network segment to use and dedicate it to Auto Deploy functions
- C. Deploy each ESXi host individually and document it to satisfy security requirements
- D. Request a common shared network with flexible security measures to accommodate different auto deployment options
正解：B
解説：
You can greatly reduce the security risk of Auto Deploy by completely isolating the network where Auto Deploy is used.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.esxi.install.doc/GUID-
8DAC6FEE-0441-4072-8195-9461095C2041.html
質問 # 62
......
合格保証付き3V0-21.23問題集：https://jp.fast2test.com/3V0-21.23-premium-file.html
あなたを合格さすVMware 3V0-21.23試験専門はここにある：https://drive.google.com/open?id=1SEq0Ry6s9lSaR4nnavsYMIvy7OjYMInr