リアルCisco 300-430試験問題 [更新されたのは2024年]
300-430試験問題集で合格させるのは更新されたのは2024年年最新のImplementing Cisco Enterprise Wireless Networks
Cisco Enterpriseワイヤレスネットワークの実装としても知られるCisco 300-430試験は、エンタープライズ環境でワイヤレスネットワークの実装とトラブルシューティングにおける知識とスキルを測定するように設計されています。この試験は、CISCOのCCNPエンタープライズ認定トラックの一部であり、エンタープライズネットワーキングでのキャリアを促進しようとするネットワークエンジニア向けの専門レベルの認定プログラムです。
質問 # 70
An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server. Which protocol must be used between the controller and CA server to request and install certificates?
- A. SSL
- B. SCEP
- C. TLS
- D. LDAP
正解：B
解説：
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/locally-significant-certificates.html
質問 # 71
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?
- A. Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.
- B. Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
- C. Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NTP.
- D. Log in to the Cisco CMX CLI and issue set ntp server NTP_IP where NTPJP is the IP of the NTP server.
正解：A
解説：
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200906- Troubleshooting-CMX-connectivity-with-WL.pdf
質問 # 72
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan 30 add
- B. config flexconnect group BranchA-FCG vlan 30 add
- C. config flexconnect BranchA-FCG vlan add 30
- D. config flexconnect group BranchA-FCG vlan add 30
正解：D
解説：
質問 # 73
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. lost and stolen devices
- B. network analyzers
- C. unauthorized users
- D. malware
- E. keyloggers
正解：A、D
質問 # 74
An engineer must control administrative access to the WLC using their Active Directory without being concerned about RBAC after the admin user is authenticated. Which two features does the engineer configure to accomplish this task? (Choose two.)
- A. ACL
- B. TACACS server
- C. Device Admin Policy Set
- D. RADIUS server
- E. User Access Mode: ReadWrite
正解：B、C
質問 # 75
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. presence
- B. analytics
- C. connect and engage
- D. detect and locate
正解：D
質問 # 76
What is the Cisco recommended configuration for a Cisco switch port connected to an AP in local mode for optimal voice over WLAN performance with an 8821 wireless phone?
- A. switchport mode access
mis qos trust device cisco-phone - B. switchport mode access
mis qos trust dscp - C. switchport mode access
mis qos trust cos - D. switchport encapsulation dotlq
switchport mode trunk
mis qos trust device cisco-phone
正解：C
質問 # 77
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: monitor, Ap submode: WIPS
- B. Ap mode: local, Ap submode: none
- C. Ap mode: monitor, Ap submode: none
- D. Ap mode: local, Ap submode: WIPS
正解：D
解説：
質問 # 78
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?
- A. Purge time dictates how long a device is registered to the portal.
- B. The last device is removed and the newly added device is updated as active device.
- C. All devices are allowed on the network simultaneously.
- D. The registration is allowed, but only one device is connected at any given time.
正解：C
解説：
To Control how many devices that can be registered by each user, go to Work Centers > BYOD > Settings > Employee Registered Devices and change the value in the box.
The default is 5 devices, but can be set between 1 to 999 devices. Note that this applies to all BYOD users globally.
Reference:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/byod-configuration --> Define Global Settings
質問 # 79
An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled to guarantee delivery?
- A. Multicast-Unicast Direct
- B. IGMP Direct
- C. Unicast Direct
- D. Multicast Direct
正解：D
質問 # 80
An administrator is querying the Cisco CMX server through REST API for active client data to build an application. Cisco CMX supports the use of version 3 of REST API to query for active clients in the network. While testing to retrieve information using the API, no results are received.
Which configuration is required for authentication against the API?
- A. cmxos apiserver user add
- B. cmxctl v3 apiserver user add
- C. cmxos v3 apiserver user add
- D. cmxctl apiserver user add
正解：A
質問 # 81
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
- A. The multicast group includes all APs
- B. Multicast IGMP snooping is not enabled
- C. The wrong multicast address was used
- D. The multicast group is assigned the wrong VLAN
正解：B
解説：
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSO
質問 # 82
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?
- A. multicast
- B. static IP
- C. mDNS
- D. fast roaming
正解：D
解説：
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html
質問 # 83
In a Cisco WLAN deployment, it is required that all APs from branch 1 remain operational even if the control plane CAPWAP tunnel is down because of a WAN failure to headquarters.
Which operational mode must be configured on the APs?
- A. Lightweight
- B. Standalone
- C. Disconnected
- D. Connected
正解：B
質問 # 84
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers.
Which protocol must be allowed to reach the MSE from the controllers?
- A. SOAP/XML
- B. CAPWAP
- C. SNMP
- D. NMSP
正解：D
解説：
NMSP (Network Mobility Services Protocol) - The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.
https://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deploy ment_guide.html#pgfId-80073
質問 # 85
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- B. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- C. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
- D. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
正解：B
解説：
質問 # 86
A hospital wants to offer indoor directions to patient rooms utilizing its existing wireless infrastructure. The wireless network has been using location services specifications. Which two components must be installed to support this requirement? (Choose two.)
- A. Cisco CMX Visitor Connect
- B. Cisco CMX AppEngage
- C. Cisco MSE
- D. WIPS
- E. Cisco CMX Analytics
正解：C、E
質問 # 87
What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?
- A. TACACS server IP address.
- B. local access point credentials
- C. supplicant credentials
- D. RADIUS shared secret
正解：D
解説：
質問 # 88
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: monitor, Ap submode: WIPS
- B. Ap mode: local, Ap submode: none
- C. Ap mode: monitor, Ap submode: none
- D. Ap mode: local, Ap submode: WIPS
正解：D
解説：
質問 # 89
An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?
- A. Allow New Telnet Sessions
- B. ReadWrite User Access Mode
- C. SNMP V3 User
- D. Global Configuration Enable Password
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_C
質問 # 90
Refer to the exhibit. An enterprise uses 802.11 b/g APs and must track the RFID tags within the network. How many channels must be used to maximize the optimization of the monitoring and tracking of the tags?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 91
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?
- A. Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.
- B. Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
- C. Log in to the Cisco CMX CLI and issue set ntp server NTP_IP where NTP_IP is the IP of the NTP server.
- D. Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NTP.
正解：A
質問 # 92
A customer has a distributed wireless deployment model where the WLCs are located in the data centers.
Because the file servers are located in the data center, the traffic from the corporate WLAN
"Corp-401266017" must go through the controllers, where the guest WLAN "Guest-19283746" traffic must use the local Internet line installed in each office. Which configuration will accomplish this task?
- A. Enable Local Switching for the corporate and guest WLAN.
- B. Disable Local Switching for the corporate and guest WLAN.
- C. Enable Local Switching for the corporate WLAN and disable it for the guest WLAN.
- D. Disable Local Switching for the corporate WLAN and enable it for the guest WLAN.
正解：A
質問 # 93
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?
- A. Disable MCS data rates 0 through 11.
- B. Disable MCS data rates used by 40 MHz channels.
- C. Disable VHT data rates.
- D. Disable data rates that use CCK.
正解：D
解説：
References: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site- survey-guidelines-wlan-00.html
質問 # 94
......
Cisco 300-430認定試験は、Cisco Enterpriseワイヤレスネットワークの実装における候補者の知識とスキルをテストするように設計されています。この試験は、エンタープライズ環境でワイヤレスネットワークの設計、展開、管理を担当するネットワークエンジニア、管理者、およびその他の専門家を対象としています。
300-430試験問題集、300-430練習テスト問題：https://jp.fast2test.com/300-430-premium-file.html
無料300-430試験問題集で合格させるお手軽に試験合格：https://drive.google.com/open?id=1UoVvVtezbIXIFK9QVkZ1TwXIXdXOB28k