究極のガイド準備問題DES-3612には正確なPDF解答[2025年02月11日]
合格できるEMCの試験問題集
質問 # 67
A customer wants to use 40 GbE breakout uplinks in a Dell EMC Integrated Data Protection Appliance (IDPA) factory-configured ToR switch. Which customer environment needs to exist to make use of this uplink option?
Response:
- A. SFTp+ transceivers and breakout cables need to be provided by the switch vendor
- B. IDPA ToR switch needs to be connected to a Dell switch
- C. Customer switch needs to have 16 unused Twinax or SFP+ optical ports
- D. IDPA ToR switch needs to be connected to a Cisco switch
正解：B
質問 # 68
A customer is backing up their VMware environment with Dell EMC NetWorker using a vProxy and a Data Domain. The NetWorker server is virtualized. The customer now has a requirement to use tape out for long-term retention.
What should be done to copy the data to tape?
Response:
- A. Install a physical server with a connected tape library and use it as a storage node
- B. Connect the tape drive directly to one of the ESX servers
- C. Connect a tape library directly to the Data Domain
- D. Connect the tape drive directly to the virtual NetWorker server
正解：A
質問 # 69
A customer wants to deploy a Dell EMC data protection solution that meets the following criteria:
- Provide their DBAs with the ability to control their own backups.
- A fixed data center footprint initially and with future upgrades.
- Ability to perform long-term retention to the cloud.
- Easy to deploy and have the Data Protection Central interface for management.
- Capability to perform reporting, indexing, and searching of backups.
Which Dell EMC solution meets the requirements?
Response:
- A. NetWorker and NVE in a public cloud with PowerProtect DD9900
- B. DP8900 with Dell EMC Cloud Tier Add-on
- C. Avamar multi-node grid with PowerProtect DD9900
- D. Avamar multi-node grid with Dell EMC Cloud Tier
正解：B
質問 # 70
A customer is evaluating the risks associated with their environment after implementing a Dell EMC Isolated Recovery Solution. What is the probability of an air gap bypass?
Response:
- A. INCREASING
- B. LOW
- C. HIGH
- D. MEDIUM
正解：A
質問 # 71
A customer wants to deploy Dell EMC Data Domain Virtual Edition on their public cloud to store backups of their cloud VMs. They want to use object storage for creating a Data Domain active tier.
What are the minimum requirements for creating a Data Domain active tier with 48 TB capacity?
Response:
- A. Block storage: 250 GB root disk and a 10 GB vNVRAM disk onlyObject storage: 48 TB active tier
- B. Block storage: 250 GB root disk and a 10 GB vNVRAM disk onlyObject storage: 5 GB metadata disk and a 48 TB active tier
- C. Block storage: 250 GB root disk, 10 GB vNVRAM disk, and a 5 GB metadata diskObject storage: 48 TB active tier
- D. Block storage: 10 GB vNVRAM diskObject storage: 250 GB root disk, 5 GB metadata disk, and a 48 TB active tier
正解：D
質問 # 72
A customer has 6,000 desktops and laptops with 11B of data, an averse backup time of 10 minutes each, and 10 IB of database data the customer wants a solution that addresses the following requirements DEduplication in the shortest backup window with the fewest components Least performance impact on the database servers
Which Dell EMC solution is recommended?
Response:
- A. One Avamar 7 8 TB 3-node server integrated with a Data Domain system
- B. NeTWorker with multiple deduplication nodes
- C. NetWorker with integrated deduplication nodes and a Data Domain system
- D. Two Avamar 2 0 TB S-node servers integrated with a Data Domain system
正解：C
質問 # 73
Which Microsoft technologies are used to provide database consistent backups for MS SQL with Dell DPS Application Direct?
Response:
- A. SSMS and T-SQL
- B. VDI and SSMS
- C. VSS and SSMS
- D. VSS and VDI
正解：B
質問 # 74
Which Dell EMC RecoverPoint for VMs feature allows a vRPAs maximum throughput to be exceeded while still maintaining consistency across Production VMs?
Response:
- A. Distributed Consistency Groups
- B. Group Sets
- C. Bookmarks
- D. Compression
正解：B
質問 # 75
A customer has 6.8 TB of data with multiple backup jobs. The largest backup is 680 GB and the existing backup window is over 10 hours which is exceeding the customer backup SLA. The customer has asked you to redesign their current solution with one that will enable the backups to complete within an 8-hour window.
When designing the solution, what is used to determine the least required Dell EMC Data Domain throughput?
Response:
- A. 850 GB/hour
- B. 680 GB/hour
- C. 68 GB/hour
- D. 85 GB/hour
正解：A
質問 # 76
A company plans to use Dell EMC NetWorker to back up their VMware environment using vProxy technology. Based on best practice, what is the recommended Transport mode?
Response:
- A. nbdssl
- B. hotadd
- C. SAN
- D. nbd
正解：B
質問 # 77
A customer has finished evaluating multiple Dell EMC NetWorker servers and wants to activate the software. In addition, they want to centralize the NetWorker licenses. Which information is required?
Response:
- A. LAC number, IP address, and hostname of the NetWorker server
- B. LAC number, IP address, and hostname of the license server
- C. Sales order number and hostname of the NetWorker server
- D. Sales order number and hostname of the license server
正解：B
質問 # 78
A customer has an existing Dell EMC Avamar for metadata integration with a Data Domain DD9800 and they recently purchased an IDPA DP8800.
The current Avamar/Data Domain system has many backups that the customer needs to keep for compliance purposes. In addition, the customer wants to migrate the data over to the DP8800 so that they can restore the backups with the DP8800.
What method must be used to achieve this migration?
Response:
- A. Data Domain-to-Data Domain Collection replication
- B. Data Domain-to-Data Domain MTree replication
- C. Avamar root-to-root migration
- D. Avamar/Data Domain Client Migration Tool
正解：B
質問 # 79
A customer is using Dell EMC IDPA DP4400 to back up their virtual environment. If the customer needs to back up their NAS file servers using the same DP4400, what should be recommended?
Response:
- A. Connect the NAS file servers directly to the DP4400
- B. Connect the NAS file servers directly to the IDPA ToR switch
- C. Connect an external NDMP Accelerator node to the customer's network
- D. Connect an external NDMP Accelerator node to the IDPA ToR switch
正解：C
質問 # 80
In a Dell EMC RecoverPoint environment, how is the Copy Journal size determined when a Consistency Group's remote copy is hosted on an XtremIO array?
Response:
- A. Journals for XtremIO volumes are always set to the minimum size allowed
- B. Adds the space used by the existing XtremIO snapshots
- C. Measures the total change rate for the RPAs connected to the XtremIO
- D. Measures the change rate of the Consistency Group's Production Volumes
正解：A
質問 # 81
In a Dell EMC NetWorker environment, what is the maximum number of cloud targets that can be served by a CloudBoost appliance?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 82
What are the additional sizing considerations when selecting the appropriate Dell EMC Data Domain model?
Response:
- A. Sizing: Based on the maximum requirement (aggressive approach)Performance: Based on the DD Boost protocol
- B. Sizing: Based on the minimum requirement (conservative approach)Performance: Based on the slowest protocol
- C. Sizing: Based on the minimum requirement (conservative approach)Performance: Based on the fastest protocol
- D. Sizing: Based on the maximum requirement (aggressive approach)Performance: Based on the fastest protocol
正解：B
質問 # 83
A customer has decided to connect their IDPA Top-of-Rack (ToR) switch using the 40 GbE QSFP+ uplinks. If the customer core or distribution switch is a Cisco switch, how should the QSFP+ and cables be ordered?
Response:
- A. 40 GbE-to-40 GbE uplink cables with QSFP+ optics attached through Dell EMC
- B. QSFP+ for IDPA ToR switch through Dell EMCQSFP+ for customer switch through Dell EMCMTP crossover cables through customer vendor or Dell EMC
- C. QSFP+ for IDPA ToR switch through Dell EMCQSFP+ for customer switch through customer vendorMTP crossover cables through Dell EMC or customer provided
- D. QSFP+ and Twinax uplink cables through Dell EMC
正解：C
質問 # 84
You are designing a backup solution based on Dell EMC Avamar technology. In order to properly configure the backup schedule, what is the maximum number of client connections to one single node Avamar server?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 85
A customer has two non-dependent applications that are protected with a Dell EMC Isolated Recovery Solution. Application A has been compromised and Application B is not compromised. The customer wants to understand how the recovery of Application A impacts Application B.
How is Application B affected by the recovery process of Application A?
Response:
- A. Application A and B are restored simultaneously
- B. Application A is failed over to Application B
- C. Application B is quarantined and analyzed
- D. Application B is unaffected by the restore
正解：A
質問 # 86
......
EMC DES-3612試験は、テクノロジーアーキテクト、コンサルタント、システムエンジニアなど、組織向けのデータ保護ソリューションを設計および実装したい人に対応するように設計されています。この試験を通じて、参加者は、さまざまなEMCテクノロジーを統合して、堅牢でスケーラブルなデータ保護ソリューションを提供する方法に関する貴重な洞察を得ます。
EMC DES-3612認定試験は、EMCデータ保護技術における候補者の能力を実証するベンダー固有の認定です。この認定は雇用主によって高く評価されており、より良いキャリアの機会とより高い給与につながる可能性があります。この認定を取得することにより、候補者はデータ保護に関する専門知識を紹介し、この分野の専門家として認識を獲得できます。
最新DES-3612試験問題集で有効で最新の問題集：https://jp.fast2test.com/DES-3612-premium-file.html