[Q49-Q67] 300-425認定で究極のガイド [2023年更新]

Share

300-425認定で究極のガイド [2023年更新]

300-425練習試験と学習ガイドは厳密検証された


Cisco 300-425試験は、Cisco Certified Network Professional(CCNP)Enterprise認定の一部です。試験範囲は、高度なワイヤレス設計原則、サイト調査、展開モデル、高密度展開、およびネットワークインフラストラクチャなど、幅広いトピックをカバーしています。試験では、802.11ac、802.11ax、および802.11nなどのさまざまなワイヤレス技術の理解も候補者のテスト対象となります。この試験に合格するには、ワイヤレスネットワークのコンセプトに深い理解、優れた問題解決能力、複雑なワイヤレスネットワークの設計と実装能力が必要です。

 

質問 # 49
A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe. Which concern must be addressed?

  • A. Syslog must be configured to the time-zone of the NMS platform.
  • B. Centralized controllers cannot uniformly authenticate global users.
  • C. Some channels may not be available consistently across the organization.
  • D. Different RF policies per office are not available in this configuration.

正解:A

解説:
Section: Wired and Wireless Infrastructure


質問 # 50
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)

  • A. client authentication
  • B. wireless channels
  • C. access point height
  • D. client authorization
  • E. absorption

正解:C、E

解説:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#


質問 # 51
An engineer must perform a pre-deployment site survey for a new building in a high-security area. The design must provide a primary signal RSSI of -65 dBm for the clients. Which two requirements complete This design? (Choose two)

  • A. HAVC access
  • B. Site access
  • C. Number of clients
  • D. WLC model
  • E. AP model

正解:C、E

解説:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidel


質問 # 52
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

  • A. Deploy environmentally friendly cabling components to blend into the environment.
  • B. Use enclosures to hide the wireless infrastructure in the surrounding environment.
  • C. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
  • D. Paint the access point to cover the LED from being noticeable.

正解:A

解説:
Section: Wired and Wireless Infrastructure


質問 # 53
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?

  • A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
  • B. Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.
  • C. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.
  • D. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating

正解:A

解説:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71477-ap-group-vlans-wlc.html


質問 # 54
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?

  • A. The switch is PoE+ capable.
  • B. The switch is 802.3af capable.
  • C. The AP is getting power from a power injector.
  • D. A redundant power supply is unavailable on the switch.

正解:B

解説:


質問 # 55
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?

  • A. 802.11ac
  • B. 802.11r
  • C. 802.11e
  • D. 802.11i

正解:B

解説:


質問 # 56
An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?

  • A. QoS
  • B. Interference mitigation
  • C. Radio management
  • D. Fast secure roaming

正解:D

解説:
https://community.cisco.com/t5/wireless-mobility-documents/what-is-cckm-and-how-does-it-affect-fast-and-secure-roaming/ta-p/3130421


質問 # 57
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?

  • A. 802.11ac
  • B. 802.11r
  • C. 802.11e
  • D. 802.11i

正解:B

解説:


質問 # 58
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?

  • A. network ap-priority is set to disable.
  • B. The critical priority access point count is oversubscribed.
  • C. network ap-priority is set to enable.
  • D. The high priority access point is oversubscribed.

正解:D


質問 # 59
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?

  • A. voice design model
  • B. roaming design model
  • C. high-density design model
  • D. location design model

正解:A

解説:
Section: Wired and Wireless Infrastructure


質問 # 60
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)

  • A. PoE battery
  • B. spirit level
  • C. goggles
  • D. ladder
  • E. access point
  • F. tall tripod

正解:A、E、F


質問 # 61
An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?

  • A. worst client available
  • B. normal client
  • C. phone client
  • D. best client available

正解:A

解説:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-gu


質問 # 62
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?

  • A. 802.11ac
  • B. 802.11r
  • C. 802.11e
  • D. 802.11i

正解:B

解説:


質問 # 63
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?

  • A. ping
  • B. eping
  • C. mping
  • D. rping

正解:A

解説:


質問 # 64
An engineer has designed an anchor redundancy for guest clients connecting to SSID with auto-anchor configured. After adding a second Anchor WLC under the SSID mobility anchor list, clients are load-balanced between existing and new anchors instead of having one anchor as active and the other one as standby. Which feature should be included in the design that will be configured on the WLC running
8.1 or above to ensure anchor redundancy?

  • A. 802.11r
  • B. AP groups
  • C. Auto-Anchor Foreign Mapping
  • D. Guest Anchor Priority

正解:D


質問 # 65
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

  • A. 50%
  • B. 20%
  • C. 40%
  • D. 30%

正解:B

解説:


質問 # 66
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

  • A. The rate of retransmitted packets must be 20 percent or below.
  • B. The rate of retransmitted packets must be 15 percent or below.
  • C. The client device must have at least an -65 dBm RSSI.
  • D. The client device must have at least an -67 dBm RSSI.
  • E. The coverage area must have a noise floor that does not exceed -87 dBm.

正解:B、D


質問 # 67
......


Cisco 300-425試験は、無線ネットワーク設計原則、無線技術、およびベストプラクティスの深い理解を必要とする厳しい試験です。この試験は、WLAN、コントローラ、アクセスポイント、およびセキュリティプロトコルなどのさまざまな無線ネットワーク技術、およびネットワーク設計原則、ネットワークトポロジー、ネットワークアーキテクチャの理解を評価するために設計されています。

 

究極のガイドは300-425最新時間限定!今すぐダウンロード!:https://jp.fast2test.com/300-425-premium-file.html

2023年最新のな厳密検証された300-425学習合格ガイドでベズトお試しセット:https://drive.google.com/open?id=1tup9hsf_zqqNKL6kGoOhEQJLm_rYPvHV


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어