最適なOmniStudio-Developer試験準備問題集でSalesforce OmniStudio-Developer問題集PDFを試そう！[2024]
Salesforce OmniStudio-Developer試験受験生を確実にパスさせるOmniStudio-Developer学習問題集
質問 # 39
A developer builds a new OmniScript. It contains aSet Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Delete or Deactivate the Set Values element.
- B. Add a Show/Hide condition on the Set Values element.
- C. Deactivate the contextId key/value pair
- D. Update the ContextId value to specify an id from the Production org.
正解：A
解説：
Explanation
The Set Values element with a ContextId key/value pair was used for testing purposes and is not needed for production. The developer should delete or deactivate the Set Values element before moving the OmniScript to a production org.
質問 # 40
What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?
- A. Deactivate the card andlayout, andgo to the PREVIEW tab for the card to test.
- B. Add a key/value pair in the DataRaptor to test it.
- C. Go to the Lightning Console and reload the page to test.
- D. Go to the PREVIEW tab In OmniScript to test.
正解：D
解説：
Explanation
The PREVIEW tab in OmniScript allows the developer to test the DataRaptor Extract by providing a record ID and viewing the output data. This is a quick and easy way to troubleshoot whether the DataRaptor Extract is retrieving data correctly.
質問 # 41
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?
- A. There are No test Data test Parameters configured.
- B. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
- C. The field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name.
- D. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
正解：C
質問 # 42
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. There is no active version of the OmniScript.
- B. There is no active version of the DataRaptor Extract.
- C. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
- D. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
正解：C、D
質問 # 43
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be included in the calculation output.
- B. It must be a matrix lookup step.
- C. It must be included in constants.
- D. It must be a calculation step.
正解：A
質問 # 44
While using the Lightning App Builder, you add a Custom Component to the console, but the component you want to add does not appearin the dropdown list.
What could cause this?
- A. The record displayed in the Lightning App Builder preview has no data for the record displayed.
- B. The FlexCard has a recordid that is for the wrong record type.
- C. The FlexCard does not have an active version.
- D. The data source for the FlexCard is not active.
正解：C
質問 # 45
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
- A.
- B.
- C.
- D.
正解：A
解説：
Explanation
The Send JSON Path syntax for accessing an element from an Integration Procedure structure is BlockName.ElementName. In this case, the BlockName is BlockX and the ElementName is ActionZ. The colon (:) is used to separate the input and output parameters, not the block and element names. The order of the block and element names should follow the hierarchy of the structure, from top to bottom. The Additional input parameter is not needed in this case, as it is already included in the Send JSON Path.
質問 # 46
What is the reason for this? Refer to the exhibit below.
- A. The flag passData.JSON in the parent OmniScript in not configured correctly.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. Both parent and embeddedOmniScripts have the same element name for the Set Values element.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
正解：D
質問 # 47
A developer isbuilding an OmniScript and needs to retrieve data from Salesforce and from an on-premises billing database.
Which two OmniScript elements could retrieve this data?
Choose 2 answers
- A. HTTP Action
- B. Response Action
- C. Navigate Action
- D. DataRaptor Extract Action
正解：A、D
解説：
Explanation
According to the OmniScript Action Elements page, a DataRaptor Extract Action can be used to "get data from one or more Salesforce records" and an HTTP Action can be used to "get, save, or delete data through a web application programming interface (API)".
質問 # 48
What JSON code correctly represents the step in the OmniScript Structure panel shown?
- A. "Step1": { "Block1": { "Text1" "Text", "Telephane1": "1234567890" }. "Block2": { "Checkbox1" false, "Block3": { "Multi-selecti": "Value Value A:Value B A;value B" }}}
- B. "Step1": {"Block1": { "Text1": "Text", "Telephone 1": "1234567890", "Block2": { "Checkbox1": false }}, "Block3": { "Multi-select1": "Value A;Value B"}}} Written
- C. "Step1": {"Block1": {"Text1": "Text" }, "Block2": ("Telephone 1": "1234567890", "Checkbox1": false, "Block3": { "Multi-select1": "Value A;Value B" }}}
- D. "Step1": {"Block1": { "Text1": "Text". "Block2": { "Telephone1": "1234567890", "Checkbox1": false }}, "Block": { "Multi-selecti": "Value A;Value B" }}
正解：A
質問 # 49
Refer to the exhibit below. A developer has configured an Integration Procedure element with SEND/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how could the developer configure Additional Input to send exactly the same data? Assume that the developer checked Send Only Additional Input.
- A.
- B.
- C.
- D.
正解：C
質問 # 50
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use an Expression Set Action to call an Expression Set.
- B. Use a List Action to merge the array elements together.
- C. Use a Set Values Element inside a Loop Block.
- D. Use a Decision Matrix Action to call a Decision Matrix.
正解：A、C
解説：
Explanation
A Set Values Element inside a Loop Block can be used to perform a calculation on each element of an array and store the result in a variable. An Expression Set Action can be used to call an Expression Set that contains one or more expressions to perform calculations on array elements. These two methods are recommended based on best practices for performing multi-step calculations on array elements.
質問 # 51
A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard's records In a Datable How should the developer configure the parent FlexCard's Node?
- A. {Records {0}}
- B. {Params, records}
- C. {Recorded}
- D. {Records}
正解：D
解説：
Explanation
The Node field for the parent FlexCard should be set to {Records}, which is an array of all the records retrieved by the parent FlexCard data source. This will allow the child FlexCard to access the records and display them in a DataTable.
質問 # 52
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?
- A. BlockX:BlockY:ActionAZ
- B. ActionZ:BlockY:BlockX
- C. BlockX.BlockYActionZ
- D. ActionZ:BlockY:BlockX
正解：A
質問 # 53
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is not selected in the properties of the Type Ahead Block.
- B. Lookup Mode is not selected in the properties of the Type A Head Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- D. The Typeghead ley is not in the correct format
正解：C
質問 # 54
Refer to the exhibit.
A developer has configured an integration Procedure element with SEND/RESPONSE TRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
A)
B)
C)
- A. Option B
- B. Option A
- C. Option C
正解：C
質問 # 55
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?
- A. The row is delete only in Version 3.
- B. The row is deleted in Version 3 and Version 1.
- C. The row is deleted in all versions
- D. The row is deleted In Versions 2 and 3 but will remain in Version 1.
正解：A
質問 # 56
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 13.99
- B. 12.99
- C. 12.99,13.99
- D. Null
正解：B
質問 # 57
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax forpassing aDate node from an element named SetValues in the URL?
- A. (' Setvalues'] [ 'Date']
- B. {(SetValues. Date)}
- C. x%SetValues.Date%
- D. %SetValues Date
正解：B
解説：
Explanation
The correct syntax for merge codes in Integration Procedure is {(NodeName)}, where NodeName is the name of the JSON node in the data source. The other options are either missing the parentheses or using incorrect symbols.
質問 # 58
A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of business, calls to the REST APIs sometimes take longer than expected to respond.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's known performance issues, which two configurations should be used to implement the call to the external system?
Choose 2 answers
- A. Check the Chain On Step checkbox on the HTTP Action in the Integration Procedure
- B. Check the Chainable checkbox on the Integration Procedure Action in the OmniScript
- C. Configure a Remote action with timeout settings of 120000
- D. Set the Timeout property on the HTTP Action in the Integration Procedure
正解：C、D
質問 # 59
A developer is building an OmniScript and needs to save to Salesforce and to an AWS Order Management system.
Which OmniScriptelement could save all of this data?
- A. DataRaptor Post Action
- B. HTTP Action
- C. Integration Procedure Action
- D. DataRaptor Load Action
正解：C
解説：
Explanation
An Integration Procedure Action can execute an Integration Procedure that contains multiple elements, such as DataRaptor Actions, HTTP Actions, or other Integration Procedure Actions. This can be used to save data to multiple systems, such as Salesforce and AWS Order Management, in one OmniScript element.
質問 # 60
Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
正解：B
質問 # 61
......
完全版OmniStudio-Developer練習テスト問題集で88の別格な問題と解釈、今すぐゲットせよ：https://drive.google.com/open?id=1PvtmRUbzHMNoFjZKmWuB9fa0rDGZ_ZUb
的確で最適なアンサー模擬試験はここにある：https://jp.fast2test.com/OmniStudio-Developer-premium-file.html