合格させる300-810試験一発合格保証100%カバー率でリアル試験問題 [2022年12月]
有効な300-810テスト解答Cisco 300-810試験PDF問題を試そう
Cisco 300-810 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 32
When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?
- A. 10 minutes
- B. 1 hour
- C. 30 minutes
- D. 20 minutes
正解: C
解説:
Reference:
Automatic Fallback
Automatic fallback takes place when the server monitors the services and the Server Recovery Manager(SRM) service will automatically fallback users to their homed nodes. The key in this configuration is that the Server Recovery Manager(SRM) service will wait 30 minutes for a failed service/server to remain active before an automatic fallback is initiated. Once this 30 minute up time is established, user sessions are moved back to their homed nodes. The Jabber client will apply the re-log in upper and lower limits for the fallback. Automatic fallback is not the default configuration, but it can be enabled. To enable automatic fallback, change the Enable Automatic Fallback parameter in the Server Recovery Manager Service Parameters to value True.
質問 33
What are two Cisco Jabber 12.6 on-premises deployment types that can be run on a Windows-enabled PC? (Choose two.)
- A. Full UC
- B. IM-only
- C. Contact Center Agent
- D. cloud-based
- E. multicloud-based
正解: A,B
質問 34
An engineer is configuring SAML SSO for a Cisco Unified Communications Manager. After completing all required steps, the engineer wants to verify the status. Which CLI command provides the status of SAML SSO?
- A. show saml status
- B. utils sso status
- C. utils saml status
- D. show sso status
正解: B
質問 35
Drag and drop the steps of the SAML SSO process from the left into the order on the right.
正解:
解説:
質問 36
Refer to the exhibit.
Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?
- A. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.
- B. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
- C. Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.
- D. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
正解: B
質問 37
An engineer is configuring SAML SSO for a Cisco Unified Communications Manager. After completing all required steps, the engineer wants to verify the status. Which CLI command provides the status of SAML SSO?
- A. show saml status
- B. utils sso status
- C. utils saml status
- D. show sso status
正解: B
解説:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/213293-troubleshoot-sso-in-cucm.html
質問 38
Refer to the exhibit.
Users report that they cannot see the Chat Rooms icon on their Cisco Jabber clients. This feature works without issue in the lab. An engineer reviews the Cisco IM and Presence and Jabber configuration and finds that the jabber-config.xml file is configured properly to support this feature. Which activity should be performed on the IM and Presence server to resolve this issue?
- A. Activate XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Service Activation.
- B. Restart Cisco XCP Message Archiver in Cisco Unified Serviceability > Tools > Control Center - Feature Services.
- C. Restart XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Control Center - Network Services.
- D. Activate Cisco XCP Connection Manager in Cisco Unified Serviceability > Tools > Service Activation.
正解: A
解説:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118684- probsol-chat-00.html
質問 39
An organization is moving from on-premise Exchange to Microsoft Office 365 for email and calendaring. The administrator would like to maintain meeting presence functionality in Jabber clients connected to Cisco IM and Presence after this move. Office 365 certificates must be installed to accomplish this. Which two trust stores should these certificates be uploaded to on Cisco IM and Presence? (Choose two.)
- A. xmpp-trust
- B. cup-xmpp-trust
- C. tomcat-trust
- D. cup-trust
- E. xmpp-fed-trust
正解: B,D
解説:
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/11_5_1/ cup0_b_config-and-admin-guide-1151su5/cup0_b_imp-system-configuration-1151su5_chapter_01010.html
質問 40
Refer to the exhibit.
Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?
- A. The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.
- B. The Voice Mail Port partition on the CSS of the phone is missing.
- C. The CSS on the Voice Mail Pilot is missing partitions for user phones.
- D. The call forward and call pickup settings do not have a CSS on Forward All.
正解: D
質問 41
Secure XMPP communication is required for XMPP federation with external domains and the Cisco IM and Presence. Which certificate is used for XMPP interdomain federation when connecting to an externally federated domain?
- A. cup
- B. cup-xmpp-s2s
- C. cup-xmpp
- D. Tomcat
正解: B
解説:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/ XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
質問 42
An engineer is configuring SAML SSO for a Cisco Unified Communications Manager. After completing all required steps, the engineer wants to verify the status. Which CLI command provides the status of SAML SSO?
- A. show saml status
- B. utils sso status
- C. utils saml status
- D. show sso status
正解: B
解説:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/213293-troubleshoot-sso-in-cucm.html
質問 43
Which authentication method allows a user to log in to an SSO-enabled Cisco Unified Communications application by utilizing a Microsoft Windows login, thereby not requiring any credentials to be entered?
- A. OAuth
- B. Smart Card
- C. form-based
- D. Kerberos
正解: D
解説:
https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118773-configure-kerberos-00.html The main advantage of Kerberos authentication compared to the other authentication methods is that you do not need to provide your credentials when you log in to Cisco Jabber. If you use Kerberos, the client does not prompt users for credentials, because authentication was already provided to gain access to the Windows desktop. This authentication method allows you to log in to Cisco Jabber with your Microsoft Windows login.
質問 44
Which type of SRV record provides the location of Cisco Expressway-E?
- A. _cuplogin._tcp.example.com
- B. _cisco-uds._tcp.example.com
- C. _collab-edge._tls.example.com
- D. _http._tcp.example.com
正解: C
質問 45
Refer to the exhibit.
Which end-user option can resolve this issue?
- A. Standard CTI Allow Control of Phones Supporting Rollover Mode
- B. Standard CTI Reception of SRTP Key Material
- C. Standard CTI Allow Calling Number Modification
- D. Standard CTI Allow Call Monitoring
正解: A
質問 46
Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used.
正解:
解説:
Explanation
Step 1 - A
Step 2 - B
Step 3 - D
質問 47
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
- B. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- C. The domain ccnp.cisco.com does not exist on the DNS server.
- D. The port specified on the SRV record is wrong.
正解: D
質問 48
What is the primary mechanism in Cisco Unity Connection that is used for toll fraud prevention?
- A. calling search spaces
- B. transfer rules
- C. fraud tables
- D. restriction tables
正解: D
解説:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/security/ guide/10xcucsecx/10xcucsec020.pdf
質問 49
Refer to the exhibit.
Apple Push Notification integration is configured in a Cisco Unified IM and Presence deployment and has been working property. Administrators now report the error "Push notification settings cannot be configured. 400 Bad Request." in the GUI, and HTTP logs are displaying the errors that are shown in the exhibit. Which action solves this issue?
- A. Reboot the IM&P cluster.
- B. Update Refresh Token Manually.
- C. Fix the network connectivity to Apple iCloud.
- D. Change the HTTP proxy settings to remove errors in request syntax.
正解: B
解説:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/push_notifications/cucm_b_push- notifications-deployment-guide.pdf
質問 50
......
300-810試験問題にて有効な300-810問題集PDF：https://jp.fast2test.com/300-810-premium-file.html
検証済み300-810問題集と解答で合格保証：https://drive.google.com/open?id=1qInprC_Psc_LDZUi1iVUZj9W5vqivC7a