FCSS_SASE_AD-25試験正確な問題集、学習ノートと理論 [2025年12月]
100%高得点合格保証FCSS_SASE_AD-25無制限55解答
Fortinet FCSS_SASE_AD-25 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 # 15
Refer to the exhibits.
WiMO-Pro and Win7-Pro are endpoints from the same remote location. WiMO-Pro can access the internet though FortiSASE, while Wm7-Pro can no longer access the internet Given the exhibits, which reason explains the outage on Wm7-Pro?
- A. The Win7-Pro FortiClient version does not match the FortiSASE endpoint requirement.
- B. The Win7-Pro device posture has changed.
- C. Win7-Pro cannot reach the FortiSASE SSL VPN gateway
- D. Win-7 Pro has exceeded the total vulnerability detected threshold.
正解：D
解説：
Based on the provided exhibits, the reason why the Win7-Pro endpoint can no longer access the internet through FortiSASE is due to exceeding the total vulnerability detected threshold. This threshold is used to determine if a device is compliant with the security requirements to access the network.
Endpoint Compliance:
FortiSASE monitors endpoint compliance by assessing various security parameters, including the number of vulnerabilities detected on the device.
The compliance status is indicated by the ZTNA tags and the vulnerabilities detected.
Vulnerability Threshold:
The exhibit shows that Win7-Pro has 176 vulnerabilities detected, whereas Win10-Pro has 140 vulnerabilities.
If the endpoint exceeds a predefined vulnerability threshold, it may be restricted from accessing the network to ensure overall network security.
Impact on Network Access:
Since Win7-Pro has exceeded the vulnerability threshold, it is marked as non-compliant and subsequently loses internet access through FortiSASE.
The FortiSASE endpoint profile enforces this compliance check to prevent potentially vulnerable devices from accessing the internet.
FortiOS 7.2 Administration Guide: Provides information on endpoint compliance and vulnerability management.
FortiSASE 23.2 Documentation: Explains how vulnerability thresholds are used to determine endpoint compliance and access control.
質問 # 16
Which description of the FortiSASE inline-CASB component is true?
- A. It detects data in motion.
- B. It has limited visibility when data is transmitted.
- C. It relies on API to integrate with cloud services.
- D. It is placed outside the traffic path.
正解：A
解説：
FortiSASE inline-CASB operates in the traffic path to provide real-time visibility and control over data in motion as it is transmitted to and from cloud applications.
質問 # 17
Which service is included in a secure access service edge (SASE) solution, but not in a security service edge (SSE) solution?
- A. ZTNA
- B. CASB
- C. SWG
- D. SD-WAN
正解：D
解説：
SD-WAN is a networking component included in a SASE solution but not in an SSE solution. SSE focuses solely on security services (like ZTNA, SWG, and CASB), while SASE combines both networking (e.g., SD- WAN) and security into a unified cloud-delivered service.
質問 # 18
Which two advantages does FortiSASE bring to businesses with multiple branch offices? (Choose two.)
- A. It eliminates the need to have an on-premises firewall for each branch.
- B. it offers customizable dashboard views for each branch location
- C. It offers centralized management for simplified administration.
- D. It enables seamless integration with third-party firewalls.
正解：A、C
解説：
FortiSASE brings the following advantages to businesses with multiple branch offices:
Centralized Management for Simplified Administration:
FortiSASE provides a centralized management platform that allows administrators to manage security policies, configurations, and monitoring from a single interface.
This simplifies the administration and reduces the complexity of managing multiple branch offices.
Eliminates the Need for On-Premises Firewalls:
FortiSASE enables secure access to the internet and cloud applications without requiring dedicated on-premises firewalls at each branch office.
This reduces hardware costs and simplifies network architecture, as security functions are handled by the cloud-based FortiSASE solution.
FortiOS 7.2 Administration Guide: Provides information on the benefits of centralized management and cloud-based security solutions.
FortiSASE 23.2 Documentation: Explains the advantages of using FortiSASE for businesses with multiple branch offices, including reduced need for on-premises firewalls.
質問 # 19
For monitoring potentially unwanted applications on endpoints, which information is available on the FortiSASE software installations page?
- A. the usage frequency of the software
- B. the license status of the software
- C. the vendor of the software
- D. the endpoint the software is installed on
正解：D
解説：
The FortiSASE software installations page shows which endpoints have specific software installed, allowing administrators to monitor potentially unwanted applications across the network.
質問 # 20
Refer to the exhibits.
Jumpbox and Windows-AD are endpoints from the same remote location. Jumpbox can access the internet through FortiSASE, while Windows-AD can no longer access the internet.
Based on the information in the exhibits, which reason explains the outage on Windows-AD?
- A. The remote VPN user on Windows-AD no longer matches any VPN policy.
- B. The FortiClient version installed on Windows AD does not match the expected version on FortiSASE.
- C. The device posture for Windows-AD has changed.
- D. Windows-AD is excluded from FortiSASE management.
正解：C
解説：
The Windows-AD endpoint now has both "FortiSASE-Compliant" and "FortiSASE-Non-Compliant" tags due to failing the antivirus software check. As a result, the Secure Internet Access Policy matches the "Non- Compliant" rule, which is set to Deny, causing the device to lose internet access.
質問 # 21
Which service is included in a secure access service edge (SASE) solution, but not in a security service edge (SSE) solution?
- A. ZTNA
- B. CASB
- C. SWG
- D. SD-WAN
正解：D
解説：
SD-WAN is a networking component included in a SASE solution but not in an SSE solution. SSE focuses solely on security services (like ZTNA, SWG, and CASB), while SASE combines both networking (e.g., SD- WAN) and security into a unified cloud-delivered service.
質問 # 22
Which two statements describe a zero trust network access (ZTNA) private access use case? (Choose two.)
- A. The security posture of the device is secure.
- B. Data center redundancy is offered.
- C. All FortiSASE user-based deployments are supported.
- D. All TCP-based applications are supported.
正解：A、D
解説：
Zero Trust Network Access (ZTNA) private access use cases focus on providing secure and controlled access to private applications without exposing them to the public internet. The following two statements accurately describe ZTNA private access use cases:
The security posture of the device is secure (Option A):
ZTNA enforces strict access controls based on the principle of least privilege. Before granting access to private applications, ZTNA evaluates the security posture of the device (e.g., whether it is patched, compliant, and free of malware). Only devices that meet the required security standards are granted access, ensuring that the device is secure before allowing private access.
All TCP-based applications are supported (Option C):
ZTNA supports all TCP-based applications, enabling secure access to a wide range of private applications, including legacy systems and custom-built applications. This flexibility makes ZTNA suitable for organizations with diverse application environments.
Here's why the other options are incorrect:
B . All FortiSASE user-based deployments are supported: While FortiSASE supports various deployment scenarios, not all user-based deployments are automatically compatible with ZTNA. Specific configurations and requirements must be met to enable ZTNA functionality.
D . Data center redundancy is offered: Data center redundancy is unrelated to ZTNA private access use cases. Redundancy typically pertains to infrastructure design and failover mechanisms, not access control methodologies like ZTNA.
Fortinet FCSS FortiSASE Documentation - ZTNA Private Access Overview
FortiSASE Administration Guide - ZTNA Deployment Best Practices
質問 # 23
How can FortiView be utilized to enhance security posture within an organization?
- A. By providing detailed insights into application usage
- B. By broadcasting system updates
- C. By tracking the physical locations of network devices
- D. By displaying ads relevant to the IT department
正解：A
質問 # 24
An organization must block user attempts to log in to non-company resources while using Microsoft Office
365 to prevent users from accessing unapproved cloud resources.
Which FortiSASE feature can you implement to meet this requirement?
- A. web filter with inline-CASB
- B. application control with inline-CASB
- C. data loss prevention (DLP) with Microsoft Purview Information Protection (MPIP)
- D. DNS filter with domain filter
正解：A
質問 # 25
Refer to the exhibits.
A FortiSASE administrator is trying to configure FortiSASE as a spoke to a FortiGate hub.
The VPN tunnel does not establish.
Which configuration needs to be modified to bring the tunnel up?
- A. FortiSASE spoke devices do not support mode config.
- B. Auto-discovery-sender must be disabled on IPsec phase1 settings.
- C. The BGP router ID must match on the hub and FortiSASE.
- D. The network overlay ID must match on FortiSASE and the hub.
正解：D
解説：
Fortinet documentation makes clear that overlay IDs must be identical on hub and spoke for ADVPN to establish correctly:
* "When configuring the root and downstream FortiGates the Fabric Overlay Orchestrator configures...
IPsec overlay configuration (hub and spoke ADVPN tunnels)."
* "The Fabric root will be the hub and any first-level downstream devices from the Fabric root will be spokes." In the scenario:
* FortiSASE overlay ID = 100
* FortiGate hub overlay ID = 101
Mismatch prevents tunnel establishment. Therefore, the fix is: B. The network overlay ID must match on FortiSASE and the hub.
質問 # 26
Refer to the exhibits.
A FortiSASE administrator is trying to configure FortiSASE as a spoke to a FortiGate hub. The tunnel is up to the FortiGale hub. However, the administrator is not able to ping the webserver hosted behind the FortiGate hub. Based on the output, what is the reason for the ping failures?
- A. The Secure Private Access (SPA) policy needs to allow PING service.
- B. The BGP route is not received.
- C. Network address translation (NAT) is not enabled on the spoke-to-hub policy.
- D. Quick mode selectors are restricting the subnet.
正解：B
質問 # 27
Refer to the exhibit.
To allow access, which web tiller configuration must you change on FortiSASE?
- A. URL Filter
- B. FortiGuard category-based filter
- C. content filter
- D. inline cloud access security broker (CASB) headers
正解：C
質問 # 28
A customer wants to ensure secure access for private applications for their users by replacing their VPN.
Which two SASE technologies can you use to accomplish this task? (Choose two.)
- A. SD-WAN on-ramp
- B. secure web gateway (SWG) and cloud access security broker (CASB)
- C. zero trust network access (ZTNA)
- D. secure SD-WAN
正解：A、C
解説：
ZTNA replaces traditional VPNs by enforcing identity- and posture-based access to private applications. SD- WAN on-ramp integrates with FortiSASE to securely route traffic from branch users to private applications over the SASE fabric, ensuring secure and optimized access.
質問 # 29
Which authentication method overrides any other previously configured user authentication on FortiSASE?
- A. MFA
- B. RADIUS
- C. Local
- D. SSO
正解：D
解説：
Single Sign-On (SSO) overrides any other previously configured user authentication method on FortiSASE, taking precedence for user authentication.
質問 # 30
......
FCSS_SASE_AD-25問題集PDF、FCSS_SASE_AD-25最速合格したいなら：https://jp.fast2test.com/FCSS_SASE_AD-25-premium-file.html
FCSS_SASE_AD-25練習試験問題集試験：https://drive.google.com/open?id=1JOUPbYY_E_einz6FH62EipjiUVf4yKG9