[Q13-Q35] 最高のTTA-19のPDF問題集100%Fast2test試験合格率保証 [2025年06月]

最高のTTA-19のPDF問題集100%Fast2test試験合格率保証 [2025年06月]

Fast2testの問題集で100%あなたのTTA-19 ISTQB Certified Tester Advanced Level - Technical Test Analyst 2019試験を一発合格

BCS TTA-19 認定試験は、テストケースの作成、欠陥のあるコードの分析、および技術的テストのためのテスト計画と戦略の開発能力を評価します。試験は3つのモジュールから構成され、各モジュールは3時間の持続時間があります。モジュールは、テストツール、自動化技術、リスクベースのテストなどのトピックをカバーしています。試験に合格した候補者は、5年間有効な ISTQB Certified Tester Advanced Level - Technical Test Analyst 認定を受けます。

質問 # 13
Based on the classification tree the following positive test cases have been created:

Which test case is needed to complete the set?

正解：D

質問 # 14
Which of the following is the least appropriate action to mitigate risk for a www application?

A. Initiate reviews of test design
B. Allocate more time to high risk areas
C. Use professional and skilled testers with appropriate technical knowledge
D. Run tests in multiple operational environments

正解：A

質問 # 15
Scenario "Supercar"
Supercar is an online vehicle sales website specialising in a single manufacturer's Sports Utility Vehicles (SUVs) and saloons. A vehicle has two key elements, power unit and body style. The manufacturer offers three choices of power unit: petrol, diesel and hybrid. There are 3 main body styles: Saloon, Hatchback and SUV, SUVS only come as petrol and diesel options. Hybrid is available for Hatchback only. The site will allow an order to be processed if at least one of the chosen vehicle configuration is in stock, otherwise a message will be displayed asking the user to try again later.

As a tester you are asked to review the "Supercar" specification before starting to design the corresponding test cases.
Which comment would you make?

A. Boundaries for stock levels are not clearly defined
B. l have no comments, specification looks ok
C. It is not clear which message will be displayed when "out of stock"
D. Dependencies power unit and body styles are not clearly defined

正解：C

質問 # 16
To enhance the test design phase the purchase of a test design tool is being considered.
Which statement characterizes best a test design tool?

A. It enables tests to be executed automatically
B. It generates test inputs or executable tests from requirements
C. It enables individual tests to be traced to requirements
D. It validates models of the software

正解：B

質問 # 17
Which of the following is a typical defect that boundary value analysis would identify?

A. Improper handling of large and small values
B. Improper handling of sequences of events
C. Improper handling of combinations of conditions
D. Improve handling of classes of inputs

正解：A

質問 # 18
Which of the following is a typical defect that the classification tree method would identify?

A. lmproper handling of combinations of input classes
B. lmproper handling of invalid inputs
C. lmproper handling of sequences of events
D. lmproper handling of typical workflows

正解：A

質問 # 19
Which of the following tools could be introduced in addition to inspections and can partly replace a code inspection?

A. Dynamic analysis tool
B. Test design tool
C. Static analysis tool
D. Test management tool

正解：C

質問 # 20
Which of the following is a typical defect that pairwise testing would identify?

A. Improper handling of invalid inputs
B. Improper handling of typical workflows
C. Improper handling of configuration combinations
D. Improper handling of sequences of events

正解：C

質問 # 21
Identify the technique most appropriate to identify failures in the interactions of the software under test with its operating environment.

A. Decision table testing
B. Software fault attacks
C. Path testing
D. Control flow analysis

正解：B

質問 # 22
The use of exploratory testing is also being considered.
Which of the following practices is NOT part of exploratory testing?

A. Writing test charters
B. Writing detailed test procedures
C. Holding debriefing meetings
D. Working in pairs

正解：B

質問 # 23
Which of the following is NOT an example of a typical pre-condition for test execution?

A. A process for managing identified defects
B. Defined level of requirements coverage achieved
C. Thoroughly specified test procedures
D. A properly configured test environment

正解：B

質問 # 24
A diamond retailer is introducing a new stock taking system. Each diamond is assigned a character that represents the colour. The valid domain for the character ranges from D to Z.
The colour is then graded using the following scale:

Which of the following test sets will provide the best equivalence partitioning coverage?

A. A, E, H, L, P, T, S
B. E, H, L, M, U,
C. D, F, G, H, K, M, N, P, T, Z
D. D, G, K, N, S

正解：A

質問 # 25
Which of the following is an example of testing as part of the requirements specification phase?

A. A business analyst eliciting requirements
B. Performing acceptance tests against requirement
C. A test report showing requirements coverage
D. A requirements review meeting

正解：C

質問 # 26
Since the components need to be integrated in an overall software system, interoperability testing is considered to be of importance.
Which of the following techniques is most likely to be used to support interoperability tests?

A. Vulnerability Scan
B. Statement testing
C. Equivalence Partitioning
D. Defect Taxonomies

正解：C

質問 # 27
Drawing a state table based in the state model provided, how many invalid test cases can be identified from the state table?

You may assume all actions are different and independent.

A. 0
B. 1
C. 2
D. 3

正解：D

質問 # 28
Using the scenario as described above, using boundary value analysis, which would be the most interesting test set to explicitly test one single boundary value as defined in the specification?

A. (i)
B. (ii)
C. (iv)
D. (iii)

正解：C

質問 # 29
Scenario "Banking Project"
As a test analyst in the banking domain you have received the following requirement:
"The system shall allow cash advances of at least 200 Euros for all supported credit cards. The correct list of credit cards is American Express, Diners, VISA, Mastercard and Eurocard." Working on a banking project, one of the exit criteria in the test plan requires documentation of successful cash advances of at least 500 Euros for all supported credit cards.
After test execution, a complete list of cash advance test results shows the following:
a) American Express allowed advances of up to 1000 Euros
b) Visa allowed advances of up to 500 Euros
c) Eurocard allowed advances of up to 1000 Euros
d) Mastercard allowed advances of up to 500 Euros
Which of the following statements is true?

A. The exit criterion fails due to the discrepancy between American Express and Eurocard on one hand and Visa and Mastercard on the other hand
B. The exit criterion passes because all supported cards allow cash advances of at least the minimum required amount
C. The exit criterion fails because no documentation of Diners credit card test results exists
D. The exit criterion fails due to excessive advances for American Express and Eurocard

正解：C

質問 # 30
It has been suggested to organise a performance test to investigate the third type of complaint.
Which of the following could be used to quantify the situation?

A. Mean Time To Repair (MTTR)
B. Number of errors made by the user
C. Time needed for defect analysis
D. Time required by the user to perform the function

正解：D

質問 # 31
For the project three completion criteria have been defined.
A) Test cases passed more than 70%
B) Number of outstanding defects less than 0,5
C) Number of defects per test case less than 0,5
The first week of the testing has shown the following results:

Evaluate the status of the project at the end of the week against the defined completion criteria.
Which of the following options shows the correct status?

A. Criteria A = NOT OK, criteria B = NOT OK, criteria C = OK
B. Criteria A = NOT OK, criteria B = NOT OK, criteria C = NOT OK
C. Criteria A = OK, criteria B = OK, criteria C = OK
D. Criteria A = OK, criteria B = NOT OK, criteria C = NOT OK

正解：A

質問 # 32
Despite the time pressure, which of the following reasons would be the best justification for using inspections?

A. Inspections allow for process improvement which will contribute to future enhancements being implemented more smoothly in the future
B. The thoroughness of the inspection process provides the best chance of finding the defects at an earlier stage
C. Inspections allow the team to learn about the system
D. The most formal type of review is the best choice for such a critical system

正解：B

質問 # 33
Which of the following is an example of the use of defect taxonomies?

A. Grouping defects found in execution by functional areas
B. Using a list of known defect types to penetrate the security of computer systems
C. Following a defect management process through testing
D. Running tests with the aim of finding as many defects as possible

正解：B

質問 # 34
Which of the following is a risk mitigation action?