OSP-002練習問題集で検証済みで更新された170問題あります [Q74-Q90]

Share

OSP-002練習問題集で検証済みで更新された170問題あります

更新されたOSP-002試験問題集でPDF問題とテストエンジン


OSP-002認証プログラムは、OSP設計者、エンジニア、プロジェクトマネージャー、および技術者など、通信業界で働く専門家に最適です。OSP設計のキャリアを追求したい人や、この分野での既存の知識や技能を向上させたい人にも適しています。OSP-002認証プログラムは柔軟で便利に設計されており、候補者が自分のペースで勉強し、試験を受ける準備ができたときにスケジュールを組むことができます。

 

質問 # 74
The difference between a fiber optic connector and a splice is __________.

  • A. Splices need expensive tools
  • B. Connectors are demountable, while splices are permanent
  • C. Connectors are smaller than splices
  • D. Connectors require adhesives

正解:B


質問 # 75
Which cable is used in most outdoor applications?

  • A. Breakout
  • B. Distribution
  • C. Simplex
  • D. Loose Tube

正解:D


質問 # 76
OTDRs are used in outside plant cables to \_\_\_\_\_\_\_\_\_\_.

  • A. Find faults
  • B. Measure length
  • C. All of the above
  • D. Verify splice loss

正解:C


質問 # 77
The loss of a singlemode fiber is lowest at \_\_\_\_\_\_\_\_\_\_.

  • A. 1300 nm
  • B. 1550 nm
  • C. 1310 nm
  • D. 850 nm

正解:B


質問 # 78
Potential sources of interference for wireless LANs include \_\_\_\_\_\_\_.

  • A. Other wireless networks
  • B. All of the above
  • C. Moving objects
  • D. Remote controls like door openers

正解:B


質問 # 79
From a reliability standpoint, \_\_\_\_\_\_\_\_\_\_\_\_ is the best method to join two fibers.

  • A. Mechanical splicing
  • B. Fusion splicing
  • C. Factory terminations
  • D. Adhesive/polish connectors

正解:B


質問 # 80
What do category ratings of UTP cable (e.g. Cat 3, Cat 5e, Cat 6 and Cat 6A) mean?

  • A. The performance level of UTP cable
  • B. How far the cable will work in networks
  • C. How well the cables are made
  • D. Flame retardance of the cable

正解:A


質問 # 81
Concatenation or the joining of two cables in a long outside plant run is almost always done by
\_\_\_\_\_\_\_\_\_\_.

  • A. Splicing on pigtailled connectors
  • B. Field installation of connectors
  • C. Mechanical splicing
  • D. Fusion splicing

正解:D


質問 # 82
The diameter of an optical fiber is traditionally measured in \_\_\_\_\_\_\_\_\_\_.

  • A. Meters
  • B. Millimeters
  • C. Nanometers
  • D. Microns (micrometers)

正解:D


質問 # 83
What is a passive optical network (PON)?

  • A. A point-to-point network architecture in which powered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  • B. A point-to-multipoint network architecture in which powered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  • C. A point-to-point network architecture in which unpowered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  • D. A point-to-multipoint network architecture in which unpowered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.

正解:D


質問 # 84
Field terminations of singlemode fibers are generally done by _______ ?

  • A. Fusion splicing a factory terminated pigtail onto the fiber
  • B. Heat-cured anaerobic adhesive
  • C. Prepolished/splice connectors with mechanical splices
  • D. Adhesive/polish method

正解:A


質問 # 85
Before UTP cabling became widely used and the industry standard, most Ethernet Networks were connected over \_\_\_\_\_\_\_ cable.

  • A. Telephone
  • B. Coaxial
  • C. Copper
  • D. Shielded

正解:B


質問 # 86
Structured cabling standards call for a maximum length of UTP cable for data of \_\_\_\_\_\_\_\_\_\_.

  • A. 800 meters
  • B. 300 meters
  • C. 90 meters
  • D. 100 meters

正解:D


質問 # 87
What is the standard everyone in the USA refers to as the basis of structured cabling?

  • A. NEMA 63.1999
  • B. EIA/TIA TR42
  • C. EIA/TIA 568
  • D. IEEE 802.3

正解:C


質問 # 88
Which punchdown block is more often used with POTS telephone connections?

  • A. Krone block
  • B. Bix block
  • C. 66 block
  • D. 110 block

正解:C


質問 # 89
Wireless networks require cables to connect the server, router or hub to the \_\_\_\_\_\_.

  • A. SNMP
  • B. AP (Access point)
  • C. Uplink
  • D. PC

正解:B


質問 # 90
......


OSP-002試験は、OSPの設計、建設、およびメンテナンス、地上および地下ケーブルシステム、ファイバーオプティックおよび銅ケーブルシステム、安全性、環境に関する広範囲なトピックをカバーしています。この試験は、業界標準および規制に適合するOSPインフラストラクチャを設計し、そのインフラストラクチャが安全で信頼性が高く効率的であることを確認する個人の能力をテストするように設計されています。OSP-002試験に合格することは、個人が彼らの組織のニーズに合わせたOSPインフラストラクチャを設計および実装するために必要な知識とスキルを持っていることを示します。

 

最新(2023)BICSI OSP-002試験問題集:https://jp.fast2test.com/OSP-002-premium-file.html

最適な練習法にはBICSI OSP-002試験の素晴らしいOSP-002試験問題PDF:https://drive.google.com/open?id=1Z_u7YeV8IS4frPD0UTV4BBuaMSC2y8Bc


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어