Oracle 1Z0-996-21認定試験問題集には72練習テスト問題があります
最新1Z0-996-21試験問題集には高得点で一発合格
Oracle 1Z0-996-21 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 36
Your client has the following requirements:
Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create two service points: one for subtractive import and the other for consumptive export.
- B. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
- C. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- D. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
正解: B
質問 37
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Create two different VEE groups.
- B. Use the Skip Flag in the VEE rule.
- C. Remove the Negative Consumption check from the VEE group.
- D. Use Eligibility Criteria.
- E. Modify the base VEE rule.
正解: A,D
質問 38
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- B. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- C. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
- D. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- E. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
正解: E
質問 39
What can cause a bill segment to have multiple bill calculation headers?
- A. proration at Bill Factor level
- B. multiple service agreements being covered by a bill segment
- C. proration at Calculation Rules level
- D. multiple Rate Version Calculation Group
- E. multiple Scheduled Read Dates covered by the bill period
正解: A
質問 40
What contains the details of how a bill was calculated and how it will be printed on a bill?
- A. Bill Segments
- B. Service Agreement
- C. Bill
- D. Rate Schedule
- E. Calculation Rules
正解: A
質問 41
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control how the current balance is affected.
- B. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- C. They control if and how the General Ledger entries are created.
- D. They control how the payoff balance is affected.
- E. They control when a Financial Transaction is to be swept onto a bill.
正解: C,D,E
質問 42
Which business object performs critical validations whenever initial measurements are loaded?
- A. D1-IMDSeeder
- B. D1-IMDPreVEE
- C. D1-IMDRetry
- D. D1-GenericIMDMain
- E. D1-IMDPeriod
正解: A
質問 43
Which entity defines the type of collection process to start based on age of debt, amount of debt, and type of customer?
- A. Customer Class
- B. Collection Class Control
- C. Collection Class
- D. Collection Process Template
- E. Debt Class
正解: E
質問 44
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. Critical Validation
- B. Prepare for VEE
- C. post-VEE
- D. VEE
正解: A
質問 45
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- D. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- E. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
正解: B
質問 46
If a customer makes a payment for more than what is due for the account, which entity contains the logic for how this overpayment should be handled?
- A. Tender Type
- B. Customer Class
- C. Pay Segment Type
- D. Service Agreement Type
- E. Installation Options
正解: B,D,E
質問 47
How many bill segment-related financial transactions do Payment Arrangements have?
- A. none
- B. depends on the number of bills that will contain the customer's payment arrangement details
- C. depends on the number of payments that are part of the payment arrangement
- D. unlimited
- E. one
正解: E
解説:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
質問 48
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components are attached to assets.
- B. Components can't have specifications.
- C. Components can be installed at locations.
- D. Components are not a class of assets.
- E. Components have a disposition that tracks their location and status.
正解: A,C
質問 49
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?
- A. Connect the Service Point; Install a Device; Create a Usage Subscription
- B. Connect the Service Point; Install a Device; Turn on the Device
- C. Create a Device Configuration; Install a Device; Turn on the Device
- D. Create a Service Point; Install a Device; Turn on the Device
正解: D
質問 50
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will have to be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. valid head-end systems, valid device configuration types, and the electricity service type
- B. the model number
- C. billing usage rules
- D. the device's date of manufacturer
正解: D
質問 51
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. Two measuring components on the same device should have the same Units of Measure (UOM).
- C. A device should have only one measuring component type.
- D. A device configuration links a device only to interval channels.
正解: A
質問 52
Which statement is true about specifications?
- A. Specifications include the inspection history of an asset.
- B. A single specification can only be used on one asset.
- C. Specifications apply only to assets and not to components.
- D. Specifications can include peer specifications.
正解: B
質問 53
What Service Order activity types does the application include?
- A. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- D. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
正解: A
質問 54
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. Receiving; In Field; Storage; Retired
- B. In Receipt; In Field; In Stores; Retired
- C. Receiving; Installed; Storage; Retired
- D. In Receipt; Installed; In Stores; Retired
正解: B
質問 55
When you cancel a payment, what will the system automatically do?
- A. cancel all tenders associated with the payment
- B. impact the credit rating
- C. charge a NSF Fee for the payment cancellation
- D. generate a new Financial Transaction to reverse the original Financial Transaction
正解: C
質問 56
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Smart Meter Command
- B. Device
- C. Device Configuration
- D. Service Point
正解: D
質問 57
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Measuring Component Type
- B. in the Usage Rule Type
- C. in the Usage Subscription Type
- D. in the Device Type
- E. in the Service Point Type
正解: C
質問 58
How many devices can be installed at a service point at an instance in time?
- A. one for each service type
- B. up to three devices
- C. one for each measuring component
- D. exactly one device
正解: D
質問 59
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Customer Class, Person, Premise, Service Agreement
- B. Account, Bill, Customer Class, Premise, Service Agreement
- C. Account, Customer Class, Premise, Service Agreement, Service Port
- D. Account, Bill, Premise, Service Agreement, Service Port
- E. Account, Person, Premise, Service Agreement, Service Port
正解: E
質問 60
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription Type
- B. the Deferred Monitor Calculation Algorithm
- C. the requesting system or user input
- D. the Usage Subscription BO
正解: A
質問 61
......
無料提供中1Z0-996-21ブレーン問題集と1Z0-996-21リアル試験問題を試そう：https://jp.fast2test.com/1Z0-996-21-premium-file.html