NS0-520別格な問題集をダウンロードして無料で最新の（NS0-520テスト問題集をゲット2022年09月08日)
NS0-520問題集は合格保証します合格できるNS0-520試験問題2022年更新
質問 90
You want to provision an iSCSl LUN.
Which two steps are required to accomplish this task? (Choose two.)
- A. Add the target WWPN to the igroup.
- B. Map the LUN to the igroup.
- C. Add the initiator IP address to the igroup.
- D. Add the initiator 1QN to the igroup.
正解: B,D
質問 91
An administrator is migrating from a third-party's SAN to a newly purchased FAS9000. The administrator decides to use the NetApp Foreign LUN Import (FL1) process.
What must the administrator do for this process to work properly?
- A. Create six distinct zones that include specific ports within each zone.
- B. Make the destination LUN larger than the foreign LUN.
- C. Create multiple igroups for the Initiator ports.
- D. Zone target ports of source storage with initiator ports of destination storage.
正解: D
質問 92
A database administrator needs to ensure that snapshot copies of database files across multiple LUNs are taken at the same point in time. Which action achieves this outcome?
- A. Add each LUN volume to the same snapshot schedule
- B. Create each LUN on the same Fabric Pool aggregate
- C. Create each LUN within the same FlexGroup Volume
- D. Create each LUN within the same FlexVol volume
正解: D
解説:
We can discard Flexgroup because it only works on NAS Protocols.
We can discard LUNs and Aggregates because snapshots are not taken at that level Snapshots are taken at volume level You can find more information on this link:
https://community.netapp.com/t5/ONTAP-Discussions/can-we-creat-multiple-luns-from-same-volume-on-AFF300/m-p/153049#M34153
質問 93
You will be purchasing two high availability NetApp AFF A700s systems. You want to set up a 4-node cluster. Which switch would you use for the cluster interconnect switches?
- A. NetApp CN1610
- B. Cisco Nexus 3132Q-V
- C. Cisco Nexus 5548UP
- D. Cisco Nexus 5020
正解: B
質問 94
You are testing iSCSI LUN failover across a 4-node FAS9000 fabric-attached MetroCluster configuration.
In this scenario, which front end configuration is required for non-disruptive host LUN failover between sites?
- A. a stretched Layer 2 network
- B. an intercluster LIF
- C. a stretched VSAN
- D. Ipv6
正解: B
質問 95
A customer's Red Hat Linux 7.0 server's Linux native DM-MP settings for multi pa thing have not been set correctly. In this scenario, what would cause this problem?
- A. The multi path, conf file contains the blacklist stanza.
- B. Challenge-Handshake Authentication Protocol (CHAP) is not enabled.
- C. The incorrect WWID was added to the multipath.conf file.
- D. The rdloaddriver=scsi_dh_alua was not added to the end of the boot loader file.
正解: C
質問 96
Referring to the exhibit, which two pairs of ports are currently configurable as FC SAN LIFs? (Choose two.)
- A. 01b, 0h
- B. 01a, 0g
- C. 01b, 0g
- D. 01a, 0h
正解: C
質問 97
Which four FC fabric topologies does NetApp support? (Choose four.)
- A. four FC switches with multiple Inter-Switch Links (ISLs) between each pair of switches
- B. a single FC switch
- C. eight FC switches with no more than a single ISL between switches in a cascade topology
- D. a switched fabric that has 65537 ports
- E. ten FC switches per fabric, daisy chained with a single ISL between switches
- F. four FC switches with multiple ISLs between ALL switches
- G. dual FC switches with no ISLs
正解: A,B,F,G
質問 98
Exhibit.
The host in the exhibit is connected to a 4-node ONTAP SAN using dual-fabric implementation. LUNs have been mapped LUN through all available UFs on nil (our nodes. Switch 2 is powered off for high-availability testing.
How many paths per LUN would you expect the host to see in this scenario?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 99
An administrator is adding new hosts to a vSphere cluster. The cluster uses the FC protocol to connect to a NetApp cluster. The administrator wants to configure the multipathing for the ESXi host.
Which NetApp tool should be used to accomplish this task?
- A. OnCommand System Manager (OCSM)
- B. NetApp Virtual Storage Console (VSC)
- C. SnapCenter plug-in
- D. Host Utilities
正解: B
質問 100
Which two features does Assymmetric Namespase Access (ANA) support? (Choose two.)
- A. multipathing
- B. path management
- C. LUN hosting
- D. LUN masking
正解: A,B
質問 101
You are configuring a FAS8300 HA pair running ONTAP 9.8 with two hosts that requires SAN LUNs. The cluster is in a secure data center without switches. In this scenario, which block protocol is supported on the hosts?
- A. NVMe
- B. FCP
- C. ISCSI
- D. FCoE
正解: C
解説:
Direct-attachment
In a direct-attached configuration, one or more hosts are directly connected to the controllers.
You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanconf%2FGUID-193CC377-5C6F-4D3C-B42E-CE71AB6AA77F.html
質問 102
A database owner requests that two additional hosts be added to an application server cluster. This brings the host count for the fabric to 10. The company's internal procedure is to set SAN hosts with a queue depth of 256. The FAS8300 2-node cluster is configured with one HBA per node with one port connected to fabric A and one port connected to fabric B.
Users complain about inconsistent performance.
What must the storage administrator do to ensure continuous operation of the hosts in this new configuration?
- A. Create two additional LIFs per node on the FAS8300 cluster.
- B. Add two more hosts to the application server cluster.
- C. Reduce the number of LIFs per node on the FAS8300 cluster.
- D. Reduce the queue depth of the hosts such that the total does not exceed 2048.
正解: D
質問 103
You are an administrator of a multi-tenanted cluster which hosts multiple SVMs. One of your tenants requires management access to their SVM for SnapCenter to perform a backup. You are asked by the backup team to create a dedicated user account and management LIF for this purpose.
In this scenario, which LIF role would be associated with management access?
- A. Intercluster
- B. Cluster
- C. Data
- D. Node Management
正解: C
質問 104
A customer needs to change ports 0e and 0f on AFF_1 to support FC.
Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)
- A. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type target command.
- B. Restart the FC service.
- C. Take ports 0e and 0f offline.
- D. Reboot the node.
- E. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.
正解: B,C,E
質問 105
......
検証済みのNS0-520問題集で問題と解答で合格保証試験問題集テストエンジン：https://jp.fast2test.com/NS0-520-premium-file.html
検証済みのNS0-520問題集236格別な問題：https://drive.google.com/open?id=1GkVdgc0vlzZ2-kt2FqjftBmqEmkI4NtX