HP HPE6-A70試験問題（更新されたのは2023年）100%リアル問題解答
合格させるHP HPE6-A70試験最速合格
質問 64
How can network administrators upgrade AirMatch on an Aruba Mobility Master (MM)?
- A. Upgrade AirMatch as part of a global software upgrade, and upgrade Client Match separately as a loadable service module (LSM).
- B. Upgrade AirMatch and Client Match through a global software upgrade.
- C. Upgrade Client Match and AirMatch separately as loadable service modules (LSMs).
- D. Upgrade Client Match as part of a global software upgrade, and upgrade AirMatch separately as a loadable service module (LSM).
正解: C
質問 65
An Aruba solution has a WLAN that uses WPA2-Personal security. How are encryption keys dynamically managed for the wireless users?
- A. Administrators configure identical key strings on the Mobility Controllers (MCs) and wireless client
802.1X settings. - B. Keys are generated and distributed securely during each wireless user authentication process.
- C. The MM generates and distributes keys to clients and access points (APs).
- D. Keys are derived from the preshared key configured on the WLAN and on each wireless client.
正解: D
質問 66
What is a valid way to deploy an Aruba Mobility Master (MM)?
- A. as a virtual appliance on a server that meets the recommended hardware requirements
- B. as a role on a Mobility Controller 7240 that is deployed as a master controller
- C. as a role on a Mobility Controller 7030 that is deployed as a standalone controller
- D. as a subscription-based service through the Aruba cloud
正解: A
質問 67
A company has an Aruba Mobility Master (MM)-based solution. Where can a network administrator look to find a list of alerts about a variety of issues on the MM or managed devices?
- A. the MM Maintenance pages
- B. the top banner
- C. the Potential Issues dashboard
- D. the Performance dashboard
正解: B
質問 68
A network administrator adds several new APs to an Aruba solution that uses AirMatch. The administrator does not want to change the channel for the existing APs, but wants the new APs to receive a provisional plan for their channels and power.
What should the administrator do to meet this goal?
- A. Run an on-demand incremental AirMatch optimization.
- B. Run an on-demand quick AirMatch optimization.
- C. Temporarily disable AirMatch scheduling, and then enable ARM on the existing and new APs.
- D. Temporarily enable ARM on the existing and new APs, while AirMatch scheduling remains enabled.
正解: A
質問 69
Which task can an Aruba Air Monitor (AM) perform?
- A. Analyze RF signals to determine the cause of non-802.11 interference.
- B. Optimize RF through the AP channel and transmit power plans.
- C. Analyze wireless traffic patterns at the application level.
- D. Prevent client connections to rogue APs.
正解: D
質問 70
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator configures a guest WLAN on an Aruba Mobility Master (MM)-based solution. The exhibits show some of the settings for this WLAN.
Which settings must the administrator configure on each Mobility Controller (MC) at the device level for this configuration to function properly?
- A. an IPsec preshared key
- B. CPSec certificates
- C. a portal page
- D. VLAN 99 IP settings
正解: D
質問 71
Refer to the exhibit.
Network administrators need to set up a WLAN that uses WPA2 encryption and authenticates users with a preshared key (PSK) that is the same for all users. Administrators do not see where they should specify the option for the preshared key.
What should the administrators do?
- A. Configure an L3 authentication profile after the WLAN wizard is complete
- B. Click the + icon in the Authentication server section
- C. Click Personal in the slide bar.
- D. Return to the first page in the wizard and select the guest option
正解: C
質問 72
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator creates a guest WLAN on an Aruba Mobility Manager (MM). The exhibits show some of the settings for the WLAN. The administrator does not change the policies for those roles.
How does the firewall control guest clients when they first connect to the WLAN?
- A. It does not permit them to send any traffic until they are authenticated.
- B. It permits them to send any DHCP traffic and DNS and web traffic to the Internet. It redirects web traffic destined to the private network to a login portal.
- C. It permits them to send any DHCP and DNS and it redirects all web traffic to a login portal.
- D. It permits them to send any DHCP and RADIUS traffic. It redirects all web traffic destined to the Internet to a login portal and drops web traffic destined to the private network.
正解: A
質問 73
What is one networking setting that a network administrator can configure for roles in an Aruba solution?
- A. ClientMatch rules
- B. source NAT
- C. DHCP pool
- D. bandwidth limit
正解: D
質問 74
A company plans to deploy a Mobility Master (MM) solution with two MM nodes. The MM solution will manage 10 Mobility Controller (MC) appliances that will control a total of 400 APs.
How should the network administrator install the AP licenses?
- A. 800 AP licenses on each MC and no licenses on the MC
- B. 800 AP licenses on the MM and 40 AP licenses on each MC
- C. 400 AP licenses on the MM and no licenses on the MC
- D. 40 AP licenses on the MM and no licenses on the MC
正解: C
質問 75
A company has an Aruba solution. The company wants to support a guest WLAN with the internal captive portal, but the company also wants to develop their own custom portal pages.
What correctly describes the level of customization that the internal captive portal supports?
- A. The internal captive portal must use the default pages without modification, but administrators can upload pages developed externally.
- B. The internal captive portal must use the default pages without modification, and administrators cannot upload pages developed externally.
- C. Administrators can modify the default internal captive portal pages or upload pages developed externally.
- D. Administrators can modify the default internal captive portal pages, but cannot upload pages developed externally.
正解: C
質問 76
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba solution. Client 1 is assigned to the users1 role, and client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both send a packet destined to 172.16.1.10.
How does the firewall handle these packets?
- A. It permits the packet from Client 1 and denies the packet from Client 2.
- B. It permits both packets.
- C. It denies both packets.
- D. It denies the packet from Client 1 and permits the packet from Client 2.
正解: A
質問 77
How does WPA2 protect wireless user traffic in the air?
- A. It provides data integrity with TKIP and data privacy with AES.
- B. It provides data privacy with TKIP and no data integrity.
- C. It provides both data integrity and privacy with AES.
- D. It provides data integrity with AES and no data privacy.
正解: C
質問 78
Which APs operate in an autonomous or standalone mode?
- A. remote APs (RAPs)
- B. mesh points (APs)
- C. instant AP (IAP) clusters
- D. spectrum analyzers (SAs)
正解: C
質問 79
What is one setting that a network administrator can configure for user roles in an Aruba solution?
- A. Maximum session
- B. ClientMatch rules
- C. source NAT
- D. DHCP pool
正解: A
質問 80
......
HP HPE6-A70 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
| トピック 11 |
|
| トピック 12 |
|
| トピック 13 |
|
リアルHP HPE6-A70試験問題 [更新されたのは2023年]：https://jp.fast2test.com/HPE6-A70-premium-file.html
準備HPE6-A70問題解答でHPE6-A70試験問題集：https://drive.google.com/open?id=1vdX2OVvTsLe_b14Z9PJNvLMrXYvyuPko