HPは2021年最新のHPE0-V14テスト解説（更新されたのは290問があります)
HPE0-V14試験問題集を提供していますHP問題
HP HPE0-V14 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 121
A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?
- A. RAID 6 Advanced Data Guarding (ADG)
- B. optimal flash acceleration
- C. 1 Gb iSCSI connectivity
- D. thin provisioning
正解: B
質問 122
A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.
Which command can be used in the CLI to perform this operation?
- A. display counters inbound interface Ten-GigabitEthernet 1/0/10
- B. interface Ten-GigabitEthernet 1/0/10 show counters
- C. display all statistics from port 1/0/10
- D. show inbound counters port 1/0/10
正解: A
質問 123
A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042.
Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.
How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 124
Match each characteristic to the appropriate RAID level.
正解:
解説:
Explanation
質問 125
A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?
- A. NPAR
- B. FCoE
- C. RDMA
- D. RoCE
正解: A
解説:
Explanation/Reference: https://h20195.www2.hpe.com/V2/getpdf.aspx/c04312719.pdf?ver=12
質問 126
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
正解:
解説:
質問 127
Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.
正解:
解説:
質問 128
What is an access port on an Ethernet switch?
- A. A port that is connected to an FCF
- B. A port that carries untagged frames inside the network
- C. A port that carries FCP frames inside the network
- D. A port that carries multiple VLANs
正解: B
解説:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0102233
質問 129
Match the speed and protocol with the appropriate component.
正解:
解説:
Explanation
質問 130
Refer to the exhibit.
An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?
- A. Configure the interface as an access port.
- B. Configure the PVID of the interface to be VLAN 20.
- C. Configure the interface as an IRF port.
- D. Permit VLAN 1 on the interface.
正解: C
質問 131
What does the term composable mean when applied to HPE infrastructure?
- A. hardware-defined infrastructure
- B. pay-per-use consumption models
- C. to simplify and accelerate DevOps and business innovation
- D. to provide all-flash like performance, but at a hybrid price point
正解: A
解説:
Reference:
20data%20center.
質問 132
A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?
- A. D3000
- B. Nimble HF20
- C. MSA 1050
- D. Nimble AF20Q
正解: C
質問 133
Match each HPE solution to its optimal use case.
正解:
解説:
Explanation
質問 134
Refer to the exhibit.
When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?
- A. Create a new zone for ESX1 and the second storage controller.
- B. Create and ISL between the two HPE SN3000B switches.
- C. Change the timeout values on the SN3000B switch.
- D. Configure the same zone on a second HPE SN3000B.
正解: C
質問 135
You are creating a configuration for a new Nimble HF40 array.
Which tool should you use to ensure that you include adequate cache in the configuration?
- A. HPE OneView
- B. HPE NinjaSTARS
- C. HPE SPOCK
- D. HPE Storage Sizer
正解: B
質問 136
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers. Which management solution provides this functionality?
- A. iLO Standard Edition
- B. Embedded UEFI diagnostics
- C. HPE Intelligent Provisioning
- D. HPE Oneview
正解: A
質問 137
A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right.
(Choose two.)
正解:
解説:
Explanation
ANS - Xeon-platinum , af20
質問 138
When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?
- A. HPE OneView
- B. HPE iLO Amplifier Pack
- C. Intelligent Provisioning
- D. Smart Update Manager
正解: C
質問 139
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
正解:
解説:
Explanation
Answer 5710,10,535T
質問 140
When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)
- A. It should be filled with blanking panels.
- B. It provides easy access for servicing components.
- C. It allows for easier cable management.
- D. It allows for side-to-side component cooling.
- E. It does not provide correct rack airflow.
正解: A,E
質問 141
......
HPE0-V14認定ガイドPDFは100%カバー率でリアル試験問題：https://jp.fast2test.com/HPE0-V14-premium-file.html
合格させるHPE0-V14レビューガイド、信頼され続けるHPE0-V14テストエンジン：https://drive.google.com/open?id=1gNxnQrOu7pTguQSQtENwsIdpaJhew6jw