C_IBP_2205試験問題集でPDF問題とテストエンジン
C_IBP_2205問題集で必ず試験合格させる
質問 # 35
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?
- A. IF("PERIODID4" = "SSPERIODID4CU$$...)
- B. IF("PERIODID5" ="$$PERIODID5CU$$...)
- C. IF("PERIODID3" ="$$PERIODID3CUSS...)
- D. IF("PERIODID2" ="$$PERIODID2CU$$...)
正解：A
質問 # 36
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- B. A special key figure marked as an aggregate key figure (aggregate constraint)
- C. A currency conversion key figure, such as exchange rate
- D. A forecast metric key figure, such FCSTMAPE
正解：A、B
質問 # 37
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. These filters are always applied based on the values stored in the database.
- C. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- D. You can only apply one value-based filter per planning view.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
正解：B、C、D
質問 # 38
NO.23 You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?
- A. SAP IBP for Inventory
- B. SAP IBP for Sales and Operations Planning
- C. SAP IBP for Demand
- D. SAP IBP for Demand Driven Replenishment
正解：A
質問 # 39
Which supply chain challenge is addressed by SAP IBP for demand?
- A. Inability to arrive at consensus demand
- B. Inability to respond to short-term changes in supply and demand
- C. Inability to synchronize supply and demand
- D. Inability to understand and shape actual demand
正解：D
質問 # 40
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. A realignment step can change master data, planning objects and key figures.
- B. The number of steps in the realignment run is limited to 255.
- C. You must mark the realignment step as "shared" and assign the steps to users.
- D. The name of the realignment step should be no longer than 20 characters.
正解：A、C
質問 # 41
Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object?
- A. This object contains user-defined criteria that monitor execution of business plans.
- B. This object provides a single value for a unique planning combination.
- C. This object is not exposed to the user in planning views or modeling.
- D. This type of key figure is not usually stored and it cannot be set to editable.
正解：B
質問 # 42
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Download the Initial Problem Report in the Data Integration app.
- B. Download the Rejection Report in the Data Integration app.
- C. Navigate to the Master Data Workbook in Excel and open the Log.
- D. Navigate to the Manage Master Data app and open the Log.
正解：D
質問 # 43
Which type of Master Data will be represented by the Master Data Type LOCATIONFR?
- A. Compound Master Data Type
- B. Reference Master Data Type
- C. External Master Data Type
- D. Virtual Master Data Type
正解：B
質問 # 44
Which library is used by the forecasting engine for the demand sensing algorithm?
- A. Predictive analytics library
- B. Heuristics library
- C. Demand library
- D. Supply chain algorithm library
正解：D
質問 # 45
You created a key figure and want to add calculations.Which of the following rules do you consider?Note:
There are 2 correct answers to this question.
- A. The calculation chain for a key figure must always result in a calculated key figure.
- B. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- C. Key figures can be calculated across different planning levels.
- D. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
正解：C、D
質問 # 46
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.
- A. Target inventory violation cost should be less than max inventory violation cost.
- B. Target inventory violation cost should be greater than discount for demand lateness.
- C. Target inventory violation cost should be greater than inventory holding cost rate.
- D. Target inventory violation cost should be less than transportation cost rate.
正解：C、D
質問 # 47
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute as a key figure
- B. When using IFISNULL statements in the formula
- C. When modeling attribute transformations
- D. When modeling cross-period calculations
正解：C、D
質問 # 48
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Periods are identified by an integer and profiles by an alphanumeric prefix.
- B. Periods are identified by an alphanumeric prefix and profiles by an integer.
- C. Both periods and profiles have start and end dates.
- D. Both periods and profiles are identified by a unique integer.
正解：A、B
質問 # 49
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Maximum inventory
- C. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- D. Number of fair share segments Additional tiering costs (default) Inventory days of supply
正解：A
質問 # 50
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are
2 correct answers to this question.
- A. The key figure is calculated and all editable.
- B. The key figure is stored and system editable.
- C. The key figure is calculated and system editable.
- D. The key figure is stored and all editable.
正解：D
質問 # 51
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Rename the charts.
- B. Organize charts.
- C. Display all assigned analytics on a single UI.
- D. Link two analytics charts.
- E. Add process templates.
正解：B、C、E
質問 # 52
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Adjust for forecast bias in Forecast Error CV calculations
- B. Identifiy intermittent demand for Forecast Error CV calculations
- C. Propagate forecast error to upstream locations in a supply chain network
- D. Adjust Safety Stock Recommendations based on forecast error CV input
正解：A、D
質問 # 53
You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.
- A. Capacity consumption
- B. Changed variability
- C. Number of planning combinations
- D. Service levels
正解：B、D
質問 # 54
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?
- A. Capacity expansion with additional costs
- B. Adjusted production interactive values
- C. Incremental production values
- D. Production source validity at the start of seasonal peak
正解：A
質問 # 55
For which of the following application jobs can you enter planning filters as parameters?Note: There are 2 correct answers to this question.
- A. Purge Non-Conforming Data
- B. Purge Master Data
- C. Create Time Periods for Time Profiles
- D. Purge Key Figure Data
正解：B、D
質問 # 56
NO.53 Which calculations can be processed within the pre-processing step in the forecasting model?
Note:
There are 2 correct Answers to this question.
- A. Missing Values can be substituted.
- B. Correlations can be evaluated.
- C. Promotion Sales Lift Ups can be deleted.
- D. Rounding can be executed for the sales history.
正解：A、C
質問 # 57
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Unit of measure is an attribute of a master data type, such as Product.
- B. Analytics provide the user with the option to select the target unit of measure.
- C. Units of measure are usually not time-independent.
- D. Units of measure are usually not time-dependent.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
正解：A、B、D
質問 # 58
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.
- A. Target key figures for these snapshots are exposed to the user in planning views.
- B. Lag-based snapshots are automatically assigned to a snapshot operator.
- C. Lag-based snapshots are created in the Configuration app for a fixed time range.
- D. Target key figures for these snapshots must have lag as a root attribute.
正解：B、D
質問 # 59
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Comparison Chart Types
- B. Trend Chart Types
- C. Geographic Chart Types
- D. Simulation Chart Types
- E. Seasonal Chart Types
正解：A、B、E
質問 # 60
......
合格させるSAP C_IBP_2205試験最速合格にはFast2test：https://jp.fast2test.com/C_IBP_2205-premium-file.html
C_IBP_2205試験問題（更新されたのは2023年）100%リアル問題解答：https://drive.google.com/open?id=1W1rce7LBpn_dXnSL5QEd8irvXMTVwwkh