C_HCMP_2311リアルな試験問題C_HCMP_2311練習問題集 [Q23-Q38]

C_HCMP_2311リアルな試験問題C_HCMP_2311練習問題集

厳密検証されたC_HCMP_2311試験問題集と解答で無料提供のC_HCMP_2311問題と正解付き

SAP C_HCMP_2311 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Average Processing: This section will explain how to properly establish settings for determining average pay, hours, or other payroll values over select periods of time. Details on averaging frequency options and configuration of start and end dates used in calculations may also be discussed.
トピック 2	Payroll Processes: It delves into essential steps involved in processing payroll. Details on tasks like calculating hours, applying rates, determining deductions, and distributing wages will be covered in this exam section.
トピック 3	Payroll Factoring: It discusses how to establish settings for factoring payrolls. Details on configuring eligibility options, repayment terms, fees, and integrations with factoring services are also focal points of this topic.
トピック 4	Personnel Calculation Rules: In the topic of Personnel Calculation Rules, questions related to payroll processing are present. These questions may focus on taxes and wages.
トピック 5	Basic Payroll Elements: This section will provide an overview of fundamental payroll elements such as gross wages, different voluntary and required deductions, as well as net pay. Key elements that impact these calculations like pay types, exemptions, tax rates, and contribution limits may also be explained in this topic.
トピック 6	Time Wage Type Selection: The topic discusses the process of selecting suitable hourly or salary-based wages for different roles. Factors like job requirements, industry standards, and regional norms that guide time wage type choices will be covered.
トピック 7	Payroll Basics: This topic focuses on the foundational concepts which are effective for payroll management. It discusses procedural steps which ensure clarity and ease in navigating the payroll process.

 

質問 # 23
When processing a wage type, there is no requirement to differentiate between employee subgroup groupings. What value must you add in parameter 3 when function PIT calls the rule to process the wage type?

• A. Pnn
• B. GEN
• C. NOAB
• D. <Blank>

正解：C

質問 # 24
In which payroll subschema are time wage types selected?

• A. TM04 Time Evaluation Without Clock Times
• B. TC00 Time Data Processing, WT Selection
• C. TM00 Time Evaluation with Clock Times
• D. XINO Initialization of payroll (INTERNATIONAL)

正解：B

解説：
In SAP HCM Payroll for SAP S/4HANA, time wage types are selected during the payroll process. This selection is performed in the payroll subschema using the function GWT (Generate Wage Types). The time wage types are selected based on the processing type of a TIP entry1. Specifically, the TC00 schema (Wage Type Generation International) is used for this purpose2. References = 2, 1
https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/85346b7b83c8474e993429d934f77cc0/de38c2531bb9
https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/c6c3ffd90792427a9fee1a19df5b0925/e138c2531bb9b

質問 # 25
In which order can you carry out the payroll process?

• A. 1.Release payroll.
  2.Exit payroll.
  3.Start payroll.
• B. 1.Start payroll.
  2.Release payroll.
  3.Exit payroll.
• C. 1.Start payroll.
  2.Check result.
  3.Exit payroll.
• D. 1.Release payroll.
  2.Start payroll.
  3.Exit payroll.

正解：C

解説：
The correct order to carry out the payroll process is as follows:
Start payroll. The system calls up a country-specific payroll program and performs payroll using the values you entered in the payroll program1.
Check result. You check whether payroll has run correctly, or determine where errors have occurred. If desired, you can obtain a detailed payroll log1.
Exit payroll. You exit the payroll run and set the payroll area to "exit". This locks the payroll area for the current payroll period and prevents any changes to the payroll-relevant data1. References = 1: The Payroll Process | SAP Help Portal

質問 # 26
What does operation MULTI RAA do?

• A. Multiply the wage type being processed by double the amount in the rate field.
• B. Multiply the value of the number field by the value of the amount field and store the result in the rate field.
• C. Multiply the wage type being processed by the amount in the rate field.
• D. Multiply the value of the rate field by the value of the amount field and store the result in the amount field.

正解：D

質問 # 27
What do you need to configure to valuate a time wage type using a wage-type-dependent constant?

• A. Personnel calculation rule TMOD with MODIF T groupings
• B. Personnel calculation rule TMOD with MODIF W groupings
• C. Personnel calculation rule XMOD with MODIF 2 groupings
• D. Personnel calculation rule XMOD with MODIF A groupings

正解：C

解説：
The valuation of a time wage type with wage type-dependent constants is often dependent on certain conditions being met. You can define different, wage type dependent constants that depend on a modifier.
Different conditions are represented with different modifiers. The value of these modifiers is queried with the function RAB (Read Absences) or the operation VALBS (Valuation bases). Further conditions can be defined within the personnel calculation rule to determine whether a time wage type is valuated using a wage type-dependent constant valuation basis. In the standard system, the modifier MODIF 2 is used. You set the modifiers in personnel calculation rule XMOD ( Modifiers for Payroll ). References = https://help.sap.com/docs/r/d54170e34c6747d4a4462b963c0a6850/600_HRSP_I9/en-US/743dc2

質問 # 28
What should be the status of the payroll control record if you want to create live posting documents?

• A. Released for correction
• B. Exit payroll
• C. Released for payroll
• D. Check payroll results

正解：B

質問 # 29
What function generates time wage types on the TIP table?

• A. PZL
• B. DAYPR
• C. GWT
• D. PIT

正解：C

解説：
In SAP HCM Payroll for SAP S/4HANA, the function that generates time wage types on the TIP table is GWT (Generate Wage Types). This function processes the entries of table T510S (Time Wage Type Selection), which contains the wage types that can be selected and the conditions that must be met for the selection of a wage type1. References =
https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/85346b7b83c8474e993429d934f77cc0/de38c2531bb9

質問 # 30
In what order are the subschemas processed in the payroll main schema X000?

• A. 1.XEND Final processing
  2.XBDO Edit basic data
  3.XTOO Gross remuneration (Time Management)
  4.XAL9 Factoring and storage
• B. 1.XTOO Gross remuneration (Time Management)
  2.XBDO Edit basic data
  3.XAL9 Factoring and storage
  4.XEND Final processing
• C. 1.XBDO Edit basic data
  2.XAL9 Factoring and storage
  3.XTOO Gross remuneration (Time Management)
  4.XEND Final processing
• D. 1.XBDO Edit basic data
  2.XTOO Gross remuneration (Time Management)
  3.XAL9 Factoring and storage
  4.XEND Final processing

正解：D

解説：
The subschemas of the payroll main schema X000 are processed in the following order:
XBDO: Edit basic data
XTOO: Gross remuneration (Time Management)
XAL9: Factoring and storage
XEND: Final processing12 References =
https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/8dde694fdfc548afb97e01051396e708/f5a1de5371874
https://help.sap.com/docs/ERP_HCM_SPV/174123b1d22d4793a7d0570196ab5c23/f5a1de537187424de1000000

質問 # 31
You want to use rule Z123 to process only wage type 1200 in the results table (RT). The processing will differ for hourly and salary employees. How do you call the rule?

• A. PRT Z123 <blank> <blank>
• B. PRT Z123 1200 <blank>
• C. PRT Z123 GEN NOAB
• D. PRT Z123 <blank> NOAB

正解：B

解説：
The rule Z123 is used to process only wage type 1200 in the results table (RT). The processing will differ for hourly and salary employees. To call the rule, you would use the format PRT Z123 1200
<blank>. Here, PRT is the command to process the rule, Z123 is the rule number, 1200 is the wage type to be processed, and <blank> is left empty to allow for different processing for hourly and salary employees. References =
https://theexamquestions.com/blog/sap-hcm-payroll-with-erp-demo-questions\

質問 # 32
What is the purpose of the GENAU constant in the standard payroll process?

• A. It increases the accuracy of rounding.
• B. It decreases the time for processing payroll.
• C. It removes redundancy from calculations.
• D. It provides employee groupings for payroll.

正解：A

質問 # 33
When processing a wage type, there is no requirement to differentiate between employee subgroup groupings.
What value must you add in parameter 3 when function PIT calls the rule to process the wage type?

• A. Pnn
• B. GEN
• C. NOAB
• D. <Blank>

正解：D

解説：
When processing a wage type in SAP Payroll, if there is no requirement to differentiate between employee subgroup groupings, you would leave parameter 3 blank when function PIT calls the rule to process the wage type1. This is because parameter 3 in the PIT function is typically used for relative time unit, and if set to 'X', it would mean WPBP for each time unit1. However, in this case, since there is no differentiation needed for employee subgroup groupings, parameter 3 should be left blank. References =
https://community.sap.com/t5/enterprise-resource-planning-blogs-by-members/understanding-functions-in-payro

質問 # 34
The following wage type with its wage type fields is given:
What is the result of the wage type in the output IT if it only runs through the following calculation rules: MULTI RAA and ADDWT *?

• A. Rate 10
  Number = 0
  Amount = 0
• B. Rate = 0
  Number = 0
  Amount = 130
• C. Rate = 0
  Number = 0
  Amount = 0
• D. Rate = 10 Number = 0
  Amount = 130

正解：D

質問 # 35
Which options can you use with function PIT to control wage type access in a personnel calculation rule (PCR)? Note: There are 2 correct Answers to this question.

• A. Pnn
• B. ABART
• C. NOAB
• D. GEN

正解：C、D

質問 # 36
How many parameters can function DAYMO use?

• A. 0
• B. 1
• C. 2
• D. 3

正解：C

質問 # 37
What do you need to configure to valuate a time wage type using a wage-type-dependent constant?

• A. Personnel calculation rule TMOD with MODIF T groupings
• B. Personnel calculation rule TMOD with MODIF W groupings
• C. Personnel calculation rule XMOD with MODIF 2 groupings
• D. Personnel calculation rule XMOD with MODIF A groupings

正解：C

質問 # 38
......

無料でゲット！高評価SAP C_HCMP_2311試験問題集を今すぐダウンロード！：https://jp.fast2test.com/C_HCMP_2311-premium-file.html