300-435問題集でリアル試験問題でテストエンジン問題集でトレーニング [Q34-Q55]

300-435問題集でリアル試験問題でテストエンジン問題集でトレーニング

Cisco 300-435テスト問題集とオンライン試験エンジン

質問 # 34
Refer to the exhibit.

An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?

A. yang-data+json
B. yang +json
C. yang.data+json
D. json

正解：A

質問 # 35
Refer to the exhibit.

Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)

A. disableMyMerakiCom
B. timezone
C. tags
D. organizationId
E. type

正解：D、E

解説：
:
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.

質問 # 36
Refer to the exhibit.

A template is provided to a junior developer to automate the creation of a network on the Meraki dashboard. The new network needs to have the id 123456789 and support only wired network connections. What type needs to be added to the API?

A. wireless
B. systemsManager
C. switch
D. appliance

正解：C

解説：
To automate the creation of a network on the Meraki dashboard that supports only wired network connections, the type 'switch' needs to be added to the API. This is because 'switch' refers to network switches, which are hardware devices that connect devices on a computer network by using packet switching to receive, process, and forward data to the destination device. In contrast, 'wireless' would refer to Wi-Fi connections, 'appliance' could refer to security appliances or other types of network equipment not specifically related to wired connections, and 'systemsManager' is related to mobile device management. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )

質問 # 37
Fill in the blank to complete the URL for the Cisco SD-WAN API that retrieves a list of users that are logged into a device.

正解：

解説：
interface?
Explanation
https://vmanage-ip-address/dataservice/device/interface?deviceId=deviceId

質問 # 38
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96-
143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.

正解：

解説：
?deviceId=

質問 # 39
What is primary purpose of using the Cisco SD-WAN vManage Certificate Management API?

A. to report an issue to Cisco TAC
B. to contact Enterprise Certificate Authority
C. to install signed certificates
D. to securely deploy vManage

正解：C

解説：
The primary function of the Cisco SD-WAN vManage Certificate Management API is to install signed certificates on network devices. This process is crucial for establishing trusted communications between devices managed via vManage. References := (Automating Cisco Enterprise Solutions Official Cert Guide)

質問 # 40
Refer to the exhibit.

A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs. The documentation states the URL is as shown in the exhibit for this REST call using POST, and that "policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable "s" is a valid Requests session object and the variable "policy-id" is the policyId?

A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)
C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId': policy_id})
D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)

正解：A

質問 # 41
Refer to the exhibit.

The configuration commands are entered in CLI config mode to configure a static telemetry subscription on a Cisco IOS XE device. The commands are accepted by the device, but the consumer receives no telemetry dat a. Which change must be made to ensure that the consumer receives the telemetry data?

A. The update policy period must be shortened.
B. The IP address of the receiver must be set.
C. The stream type must be set to YANG.
D. The sender IP address must be set.

正解：B

解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html

質問 # 42
The automation engineer must replace device configuration using RESTCONF. How is this configured using the Python library Requests?

A. put()
B. post()
C. delete()
D. patch()

正解：A

質問 # 43
Refer to the exhibit. Interfaces named Loopback0, Loopback1, and Loopback2 must be created and enabled on a Cisco IOS XE target device in the lab group. Which loop must be added to the end of the Ansible "create int" task?

A. with_list: "{{intlist}}"
B. with_parent: "{{intlist}}"
C. with_items: "{{intlist}}"
D. with_groups: "{{intlist}}"

正解：C

質問 # 44
Which Python snippet receives a Meraki webhook request?

A. Option B
B. Option C
C. Option A
D. Option D

正解：D

解説：
The correct Python snippet to receive a Meraki webhook request is the one that uses the @app.route decorator with the correct endpoint and accepts the POST method since webhooks typically send data using HTTP POST requests. In this case, Option D is set up to accept POST requests which align with how webhooks operate. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )

質問 # 45

Refer to the exhibit. Interfaces named Loopback0, Loopback1, and Loopback2 must be created and enabled on a Cisco IOS XE target device in the lab group. Which loop must be added to the end of the Ansible "create int" task?

A. with_list: "{{intlist}}"
B. with_parent: "{{intlist}}"
C. with_items: "{{intlist}}"
D. with_groups: "{{intlist}}"

正解：C

解説：
https://docs.ansible.com/ansible/latest/playbook_guide/playbooks_loops.html#with-items

質問 # 46
Drag and drop the code from the bottom onto the box where the code is missing to perform the login operation and security check on the vManage web server at the specified IP address. Not all code options are used.

正解：

解説：

質問 # 47
Which two actions do Python virtual environments allow users to perform? (Choose two.)

A. Quickly create an isolated Python environment with module dependencies.
B. Efficiently port code between different languages, such as JavaScript and Python.
C. Quickly create any Python environment for testing and debugging purposes.
D. Simplify the CI/CD pipeline when checking a project into a version control system, such as Git.
E. Run and simulate other operating systems within a development environment.

正解：A、C

質問 # 48
DRAG DROP
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.
Select and Place:

正解：

解説：

Section: Cisco DNA Center
Explanation/Reference: https://developer.cisco.com/docs/dna-center/#!using-id-values-in-rest-requests

質問 # 49
A company requires redundancy for its multihomed BGP external connections. What two features can be configured on the WAN routers to automate failover for both outbound and inbound traffic? (Choose two.)

A. HSRP
B. local preference
C. weight
D. AS path prepending
E. MED
F. floating static route

正解：A、D

質問 # 50
Which two factors influence the location accuracy of a device using Scanning APIs? (Choose two.)

A. client device orientation
B. device manufacturer/OS
C. AP placement
D. battery life of the device
E. amount of device antennas

正解：A、E

質問 # 51
Refer to the exhibit.

A Python script has been created that calls the Cisco SD-WAN vManage Device Inventory API to get the list of vEdges. The JSON data that returns to a Python dictionary has been converted and assigned to a variable named "d". A portion of the JSON is shown in the exhibit. Which code will complete the expression hostname= to access the hostname?

A. d["data"][0]["host-name"]
B. d[data][0][host-name]
C. d("data")[0]("host-name")
D. d["host-name"]["data"]{"0"}

正解：A

解説：
Explanation
The double-quotations are a necessary syntax of Python. And for the json portion doesnt use parentheses. It always uses brackets. d["data"][0]["host-name"] is the only logical answer.

質問 # 52
Refer to the exhibit.

Which NETCONF protocol operation is used to interact with the YANG model?

A. <edit-config>
B. <copy-config>
C. <get>
D. <get-config>

正解：C

解説：
The exhibit is a read-only YANG leaf ("ro vlan") therefore is classed as "state" date and not config data. As such the <get> statement is what you need to use to interact with this particular YANG model. Reference documentation: https://blogs.cisco.com/developer/ask-hank-yang-leaves

質問 # 53
Drag and drop the code snippets from the bottom onto the blanks in the code to create a network for a new Cisco Meraki organization. Not all option are used?

正解：

解説：

質問 # 54
Refer to the exhibit.

A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What is the YANG data node that is referenced in the response?