[2026年09月07日] 有効な303テスト解答303試験PDF問題を試そう
有効なBIG-IP ASM 303問題集はあなたの合格を必ず保証します
質問 # 38
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source Based on precedence, which virtual server accepts this traffic?
- A. MyVS2
- B. MyvS1
- C. MyVS3
- D. MyVS4
正解：A
質問 # 39
Refer to the exhibit. An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to /resources/201.1.2h.l_l.com they are unable to receive content. What is the likely cause of the issue?
- A. The pool associated with the virtual server is falling its health check.
- B. The virtual address does not have route advertising enabled.
- C. The pool associated with the virtual server does not have priority group activation enabled.
- D. The virtual address does not have ARP enabled.
正解：D
質問 # 40
Refer to the exhibits. An LTM Specialist is reconfiguring a virtual server to redirect all clients to HTTPS. Testing reveals that the redirect is functioning incorrectly. As part of the troubleshooting process, the LTM Specialist performs a packet capture. What is the issue?
- A. The redirect is causing an infinite loop.
- B. The virtual server is incorrectly processing the HTTP request.
- C. The redirect is sending the client to the incorrect location.
- D. The virtual server is missing a clientssl profile.
正解：C
質問 # 41
A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find this information?
- A. System > Services
- B. System > Support
- C. System > Resource Provisioning
- D. System > Platform
正解：C
質問 # 42
A BIG-IP Administrator sees the following error message in /var/log/ltm diskmonitor:
*******;
Disk partition shared has less than 30$ free
Which section of the Configuration Utility should the BIG-IP Administrator access to investigate this error message?
- A. Statistics > Module Statistics > System
- B. System > File Management
- C. Statistics > Analytics
- D. System > Disk Management
正解：D
質問 # 43
A 8IG-IP Administrator is making adjustments to an iRule and needs to identify which of the 235 virtual server configured on the BIG-IP device will be affected. How should the administrator obtain this information in an effective way?
- A. Local traffic > Rules
- B. Local Traffic > Virtual Server
- C. LOCAL Traffic > Network Map
- D. Local traffio Pools
正解：C
質問 # 44
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?
- A. Adaptive
- B. Up internal
- C. Transparent
- D. Reverse
正解：C
解説：
Explanation
Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.
質問 # 45
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?
- A. System > Configuration
- B. Network > Self IPs
- C. Network > Interfaces
- D. System > Platform
正解：D
質問 # 46
A BIG-IP Administrator is conducting maintenance on one BIG-IP appliance in an HA Pair. Why should the BIG-IP Administrator put the appliance into FORCED_OFFLINE state?
- A. To terminate existing connections to Virtual Servers and prevent the appliance from becoming active
- B. To preserve existing connections to Virtual Servers and reduce the CPU load
- C. To allow new connections to Virtual Servers and ensure the appliance becomes active
- D. To terminate connections to the management IP and decrease persistent connections
正解：A
質問 # 47
An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests. What is the maximum number of guests that the LTM Specialist should upgrade at once?
- A. Four
- B. Eight
- C. One
- D. TWO
正解：C
解説：
Each guest is independent, just like hardware upgrades. Can only upgrade one by one, there is no way to upgrade at the same time.
質問 # 48
A BIG-IP Administrator needs to remove a pool specific health monitor. There is a pool named Best Pool with two members, one named Best pool member and one named Best pool member2.
In the Local Traffic section of the administrative GUI, which stops should the BIG-IP Administrator take to remove a pool level monitor?
- A. Monitors > Monitor Name> Instances
- B. Pool > Pool List> Best Pool > Health Monitors
- C. Pool > Pool List > Best Pool > Members > Health Monitors
- D. Nodes > Node List> Best _pool_memberl > Heath Monitors
正解：B
質問 # 49
An LTM device is load balancing telnet and ssh applications in a client/server environment experiencing significant packet delay. Which setting in the TCP profile should reduce the amount of packet delay?
- A. enable Proxy Maximum Segment
- B. disable Bandwidth Delay
- C. increase Maximum Segment Retransmissions
- D. disable Nagle's Algorithm
正解：D
質問 # 50
Refer to the exhibit. Given the bigip conf extract shown where the servers only talk http on port
80, which node will receive the next user request?
- A. 10.1.1.1
- B. 10.1.1.2 0
- C. 72.10.1.1
- D. 10.1.1.3
正解：D
質問 # 51
A Client makes the request displayed below to the application server. Which virtual server type should an LTM Specialist use to load balance based on the URI? .
- A. Forwarding (Layer 2)
- B. Performance (Layer 4)
- C. Standard
- D. Stateless
正解：C
質問 # 52
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen. Which configuration item enables this behavior?
- A. Gateway pool monitor
- B. Gateway Fail Safe
- C. iRule
- D. Gateway pool
正解：B
質問 # 53
An LTM device is serving an FTP virtual server that has three pool members. The FTP pool members are monitored via TCP port 21. Customers are reporting that they are able to log in, but are sometimes unable to upload files to the server.
Which monitor should the LTM Specialist configure to verify that the servers can handle file uploads?
- A. FTP
- B. External
- C. Real Server
- D. Inband
- E. Scripted
正解：B
質問 # 54
Refer to the exhibits. An LTM Specialist is troubleshooting an application configured on an LTM device on a one-armed configuration. The application is NOT working through the LTM device but does work when accessed directly via the application servers. The virtual server
192.168.1.211:443 is configured to SNAT using the address 192.168.1.144 and references a pool with the member 192.168.10.80:443. No Client or Server SSL profiles are associated. The LTM Specialist has collected two traffic captures to help determine the issue. What is the problem with the configuration on the LTM device?
- A. Pool member is configured for SSL off-loading.
- B. Pool member is configured to use wrong port.
- C. Virtual server is configured to use wrong port.
- D. Virtual server is configured without SSL Profiles.
正解：B
質問 # 55
An LTM Specialist has trouble with SNMP traps in the management network The ITM Specialist takes the network capture shown to troubleshoot:
What should the UM Specialist change to capture packets related to this workflow?
- A. the tcpdump filter expression
- B. the verbose level
- C. the interface
- D. the port
正解：C
質問 # 56
An LTM HTTP pool has an associated monitor that sends a string equal to 'GET /test.html'. Which two configurations could an LTM Specialist implement to allow server administrators to disable their pool member servers without logging into the LTM device? (Choose two.)
- A. Set `receive string' equal to 'SERVER UP and ask the server team to set string `SERVER DOWN' in test.html.
- B. Set `receive disable string' equal to 'SERVER DOWN' and ask the server team to set string
`SERVER DOWN' in test.html. - C. Set `disable pool member' equal to 'SERVER UP' and ask the server team to set string `SERVER DOWN' in test.html.
- D. Set `alias' equal to 'SERVER DOWN' and ask the server team to set string `SERVER DOWN' in test.html.
- E. Set monitor to transparent and ask the server team to set string `TRANSPARENT' in test.html.
正解：A、B
質問 # 57
A stand-alone LTM device is to be paired with a second LTM device to create an active/standby pair. The current stand-alone LTM device is in production and has several VLANs with floating IP addresses configured. The appropriate device service clustering (DSC) configurations are in place on both LTM devices.
Which two non-specific DSC settings should the LTM Specialist configure on the second LTM device to ensure no errors are reported when attempting to synchronize for the first time? (Choose two.)
- A. VLANs
- B. self IP addresses
- C. pools
- D. default route
正解：A、B
質問 # 58
A web application is configured as follows:
What should be modified to set a maximum request limit?
- A. Pool settings
- B. HTTP profile
- C. Virtual server settings
- D. ICP Profile
正解：B
質問 # 59
......
F5 303試験には、多数の挑戦的なシナリオ、多肢選択問題、実践課題が含まれており、個人がさまざまな展開シナリオでアプリケーション、ネットワーク、データを保護する能力を証明する必要があります。この試験に合格した候補者は、脅威、脆弱性、エクスプロイトを判断するための業界標準の方法に対する実践的な理解と、適切なセキュリティポリシー、構成設定、攻撃緩和戦略を開発する能力を証明します。これにより、新たに出現するセキュリティ脅威に対する防御が可能となります。
303問題集でリアル試験問題でテストエンジン問題集でトレーニング：https://jp.fast2test.com/303-premium-file.html
303テスト問題集とオンライン試験エンジン：https://drive.google.com/open?id=1wONd2s1qxbWHd8J5OSvsv7HEKtA4bzQe