[2026年08月] 確実合格する有効な方法Nutanix試験問題集でNCP-EUC試験学習ガイド
NCP-EUC問題集とNutanix Certified Professional - End User Computing (NCP-EUC) 6.10 Examトレーニングコースでお客様の合格を楽にさせる学習合格試験問題！
Nutanix NCP-EUC試験は、特定のハードウェアやソフトウェアベンダーに結びついていないベンダーニュートラルな認定試験です。この試験は、Nutanix VDIソリューションを扱うITプロフェッショナルだけでなく、他のVDIソリューションを扱うプロフェッショナルにも適用されるように設計されています。また、この試験は、広範囲なトピックをカバーし、Nutanix VDIアーキテクチャ、展開、構成、および管理についての深い理解が必要です。
NCP-EUC認定は、雇用主に広く認識され、業界で高く評価されています。これは、エンドユーザーコンピューティングの分野でのスキルと知識を証明し、キャリアを進めるための優れた方法です。この認定は、Nutanixテクノロジーを使用してエンドユーザーコンピューティングソリューションを提供および管理するために必要なスキルと知識を従業員が持っていることを組織が確認するための優れた方法でもあります。
NCP-EUC認定は、IT業界で高く評価され、世界中の組織に認められています。この認定は、IT専門家が自分のキャリアの見通しを向上させ、Nutanixインフラストラクチャをデスクトップとアプリケーションの仮想化に展開し管理するために必要なスキルと知識を提供します。 NCP-EUC試験は、エンドユーザコンピューティングと仮想化の深い理解が必要な難易度の高い試験ですが、試験に合格することは、この分野の専門知識を持つことを証明する大きな達成です。
質問 # 84
An administrator has a VDI environment of 1400 VMs running on a cluster of six hosts. On average there are about 800 powered-on VDIs at the same time.
During a maintenance window, all VMs are set to be powered on to ensure they boot on the updated configuration. Looking in Citrix Studio, the administrator notices that not all VDIs are powered on.
What can most likely explain this?
- A. The Citrix directory server has network issues.
- B. Cluster memory capacity has been exceeded.
- C. Maximum allowed powered-on VDI VMs have been exceeded.
- D. The Citrix storefront server has network issues.
正解：B
解説：
In a Nutanix AHV cluster, resource management and Admission Control ensure that VMs are only powered on if there are sufficient physical resources (specifically Memory) available to back them.
A cluster designed to run an "average" of 800 VMs likely has its physical memory sized to accommodate that workload plus some buffer (HA). Attempting to power on 1400 VMs simultaneously (almost double the average load) on the same 6-node cluster will likely exhaust the available physical RAM. Once the cluster memory capacity is full, AHV will refuse to power on additional VMs, resulting in the state observed in Citrix Studio where many VMs remain off. Citrix network issues (Directory/Storefront) would typically result in registration failures or connection errors, not the inability of the hypervisor to power on the VM.
質問 # 85
An administrator has a Nutanix NX-based cluster running non-persistent EUC workloads. The administrator has just received new Cisco UCS nodes to be used to extend the environment. What action must the administrator take to use the Cisco UCS nodes in the Nutanix environment?
- A. Add nodes to the cluster and configure the CPU feature sets.
- B. Add nodes to the existing NX-based cluster.
- C. Create a new cluster for the Cisco UCS nodes.
- D. Add nodes to the cluster and configure advanced processor compatibility feature.
正解：C
解説：
According to the Nutanix Hardware Administration Guide and Product Mixing Restrictions, mixing nodes from different hardware vendors (OEMs) in the same cluster is not supported.
Specifically, a cluster must contain nodes from a single vendor (e.g., all Nutanix NX, all Dell XC, or all Cisco UCS). Mixing Nutanix NX nodes with Cisco UCS nodes within the same cluster is explicitly listed as an unsupported configuration due to differences in hardware lifecycle management, firmware updates, and foundation processes.
Therefore, the administrator must create a new, separate cluster for the Cisco UCS nodes. They can then leverage features like Cluster-to-Cluster replication or a multi-cluster VDI broker configuration to manage the environment, but the nodes cannot be merged into the existing NX cluster.
質問 # 86
An administrator needs to manage the virtual desktop environment for a small QA group.
Which two requirements would prevent a non-persistent deployment? (Choose two.)
- A. users need to test various peripherals.
- B. users need to access web-based applications.
- C. users need to test application installation routines.
- D. users need to log on and log off frequently.
正解：A、C
解説：
non-persistent VDI is a type of virtual desktop infrastructure (VDI) that does not save any changes made by the user on the virtual machine (VM) across sessions. Non-persistent VDI uses a master image to create and delete VMs as needed.
Therefore, if the administrator needs to manage a non-persistent deployment, they should avoid any requirements that involve modifying or installing applications on the VMs, as those changes would not be saved.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-ncp-euc-v6
質問 # 87
A multisite App Volumes deployment uses a stretched database over multiple Horizon View sites. Non- Attachable volumes will be used to support replication of AppStacks between blocks and pods.
What should the administrator do to be able to replicate AppStacks between the Nutanix clusters?
- A. Replicate the .vmdk files and AppStacks permissions using a script between the Nutanix clusters,
- B. Utilize the native async disaster recovery technology to replicate the AppStacks between the Nutanix clusters.
- C. storage container on the primary cluster to at least one host in other Nutanix clusters,
- D. Leverage an external storage system such as NFS NAS to support the non-attachable
正解：B
解説：
regarding replicating AppStacks between Nutanix clusters, it is likely that the correct answer would involve configuring some form of replication or disaster recovery technology on the Nutanix clusters themselves.
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2135-VMware-App-Volumes:BP-
2135-VMware-App-Volumes
質問 # 88
Users are reporting that their desktops are running slower than expected in an ESXi-based Nutanix cluster. upon investigation, an administrator determines that desktops on one host are running slower and have higher CPU Ready times than on other hosts.
What is causing this issue?
- A. Erasure coding's increased overhead has caused a slowdown in the environment
- B. Inline Compression has been disabled on the desktop storage container
- C. High Performance host power policy is enabled
- D. High Performance host power policy is disabled
正解：D
解説：
A high CPU Ready time means that the vCPU is waiting too long for the pCPU, which can result in poor performance and slow responsiveness of the virtual machine (VM).
According to Nutanix best practices2, one of the factors that can affect CPU Ready time is the host power policy. The host power policy determines how aggressively the host will try to save power by reducing the frequency or voltage of the pCPUs.
The recommended host power policy for Nutanix clusters is High Performance, which disables any power saving features and ensures that the pCPUs run at their maximum frequency and voltage.
This answer seems to explain why desktops on one host are running slower and have higher CPU Ready times than on other hosts, as they may be suffering from reduced pCPU performance due to a lower host power policy.
質問 # 89
Refer to the exhibit.
An administrator is configuring a virtual desktop gold master image with P40 NVIDIA vGPU. upon trying to add a vCPU assignment in Prism Element, the administrator noticed that it is not selectable and cannot proceed.
Which two actions are correct steps to resolve this issue? (Choose two.)
- A. Disable ECC by running nvdia-smi -e 0.
- B. Check if ECC Mode is turned on by running nvdia-smi -q | grep "ECC Mode" -A2
- C. Install the NVIDIA GPU Manager Driver.
- D. Install the NVIDIA GPU drivers on the Gold Master.
正解：A、B
解説：
ECC (Error Correcting Code) mode is a feature of some NVIDIA GPUs that provides error detection and correction for memory errors. However, ECC mode can interfere with vGPU functionality and prevent vGPU-enabled VMs from being created or started1. Therefore, two correct steps to resolve this issue are B (Disable ECC by running nvdia-smi -e 0) and D (Check if ECC Mode is turned on by running nvdia-smi -q | grep "ECC Mode" -A2).
https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LKjOCAW
質問 # 90
An administrator is asked to configure a container to support 2000 non-persistent linked clone desktops.
What is the optimal configuration of this container?
- A. Deduplication Only
- B. Compression and Deduplication
- C. Compression Only
- D. Compression, Deduplication, and ECX
正解：C
解説：
Comprehensive and Detailed Explanation From Exact Extract of Nutanix End User Computing documents:
According to Nutanix storage best practices for Virtual Desktop Infrastructure (VDI), the optimal configuration for Linked Clones is Compression Only.
* Linked Clones and Data Efficiency: In a Linked Clone environment, the Virtual Machines (VMs) already share a common base image (replica disk) at the hypervisor level. Because the identical operating system data is already shared via the cloning technology, the Nutanix Distributed Storage Fabric (DSF) manages this duplicate data efficiently without needing the Deduplication feature enabled on the container.
* Redundancy of Deduplication: Nutanix technical documentation explicitly states that for Linked Clones or Nutanix VAAI clones, deduplication provides no additional benefit because the data is already single-instanced. Enabling deduplication in this scenario would introduce unnecessary metadata overhead without delivering significant capacity savings.
* Role of Compression: Inline Compression is recommended for almost all workloads, including VDI. It effectively reduces the size of the unique data written to the delta disks (user data, temp files, and logs) associated with non-persistent desktops, maximizing storage efficiency without the performance cost of deduplication.
* Shadow Clones: For the read-heavy workload of 2000 desktops accessing the same base image, Nutanix utilizes Shadow Clones (enabled by default) to cache the "hot" replica disk locally on every node, ensuring high performance during boot storms, rendering the need for "performance tier deduplication" redundant for linked clones.
Summary of Best Practice:
* Full Clones / Persistent Desktops: Compression + Deduplication.
* Linked Clones / Non-Persistent Desktops: Compression Only.
質問 # 91
An administrator is in charge of an EUC environment consisting of a Nutanix cluster and an Omnissa Horizon desktop environment. During routine LCM maintenance on the Nutanix cluster, the administrator notices that the desktop pool provisioning is in an error state and new instance clones are not being created.
What are two causes of this issue? (Choose two.)
- A. LCM didn't inventory the environment successfully before starting maintenance.
- B. The cluster is experiencing high CPU/memory load, causing provisioning issues.
- C. The host having maintenance performed contains the replica VMs.
- D. Pool provisioning was not disabled prior to maintenance starting.
正解：C、D
解説：
When performing maintenance (such as Life Cycle Manager updates) on a Nutanix cluster hosting Omnissa (VMware) Horizon Instant Clones, specific operational steps are required to avoid provisioning failures.
* Pool provisioning was not disabled (Option D): It is a mandatory best practice to disable provisioning in the Horizon Connection Server before starting cluster maintenance. If provisioning remains active, the broker attempts to create VMs on hosts that may be rebooting or entering maintenance mode, leading to error states.
* The host having maintenance performed contains the replica VMs (Option C): Instant Clones rely on a "Replica" VM (a powered-on parent VM) typically residing on one of the hosts. If the host holding this Replica VM enters maintenance mode without the broker's awareness or without proper evacuation handling, the "Link" required to generate new clones is broken, causing provisioning tasks to fail immediately.
質問 # 92
An administrator has been asked to investigate encrypting intra-cluster storage traffic.
Which factor should be considered in this implementation?
- A. Stargate traffic between CVMs remains unencrypted
- B. Lack of encryption for Volume-Group connections
- C. Increased IO latency and CVM CPU utilization
- D. Higher User-VM CPU and memory utilization
正解：C
解説：
Nutanix supports Data-in-Transit Encryption to secure traffic flowing between nodes (CVM to CVM) and between the CVM and hypervisor. This feature uses TLS to encrypt replication and storage data traffic.
However, the Security Guide notes that enabling encryption introduces computational overhead. The encryption and decryption of storage traffic are handled by the Controller VM (CVM) CPUs. Therefore, a key design consideration is that this configuration results in increased CVM CPU utilization. Consequently, due to the processing time required for encryption operations, there may be a slight increase in I/O latency.
Administrators must ensure the cluster has sufficient CPU headroom on the CVMs to absorb this overhead without impacting application performance.
質問 # 93
A company wants their Nutanix VDI environment to have these characteristics:
* 3000 non-persistent desktops
* 500 RDSH-based VMS
* 100 AppStacks
How many storage containers should an administrator create to satisfy these requirements?
- A. 2 storage containers with deduplication
- B. 1 storage container for the non-persistent desktops, I storage container for the RDSH-based VMs, and 1 container for the AppStacks
- C. 1 storage container for all workloads
- D. 1 storage container for the non-persistent desktops and RDSH-based VMs, and 1 container for the AppStacks
正解：D
解説：
Nutanix offers a solution that delivers virtual apps and desktops in one click. Nutanix supports both persistent and non-persistent VDI deployments, as well as RDSH-based VMs and AppStacks.
Storage containers are logical units that group vDisks and apply storage policies such as replication factor, encryption, compression, deduplication and erasure coding3. Nutanix recommends using compression and deduplication to reduce storage usage and avoid duplicate data4.
質問 # 94
How should an administrator protect Writable AppVolumes during a disaster in a Nutanix environment?
- A. Create a storage container in both the primary and DR data centers for the Writeable AppVolumes. Set up asynchronous DR between the two sites.
- B. Create a protection domain and add the AppVolumes VM entities to it. Set up a schedule to replicate the VMS every 60 minutes.
- C. Enable HA reservations on the cluster to ensure there is capacity in case of failure.
- D. Disable HA reservations to ensure that VMS are powered on using best effort during a disaster,
正解：A
解説：
Writable AppVolumes are a feature of VMware App Volumes that provides users with a dedicated virtual disk for storing user profile data and user-installed applications1. Writable AppVolumes are stored as VMDK files on a datastore2.
To protect Writable AppVolumes during a disaster in a Nutanix environment, one possible solution is to use asynchronous DR between two sites. Asynchronous DR allows you to replicate VMs and their associated data from one site to another at regular intervals using protection domains and remote sites3.
https://www.nutanix.com/blog/vmware-app-volumes-on-nutanix
質問 # 95
Due to a recent unprivileged access incident, an administrator needs to better protect critical applications by preventing lateral movement within the EUC environment.
Which Flow Network Security feature will accomplish this task?
- A. Outbound policies
- B. VM quarantine
- C. Microsegmentation
- D. Inbound policies
正解：C
解説：
Microsegmentation is the specific functional capability within Nutanix Flow Network Security designed to control and restrict east-west traffic between virtual machines.
While traditional firewalls protect the perimeter (North-South), Microsegmentation applies stateful firewall policies directly to the vNIC of each VM. This allows an administrator to define granular rules that explicitly allow or deny traffic between individual VMs or groups of VMs (e.g., preventing a compromised VDI desktop from accessing a database server on the same subnet). This feature is the primary mechanism used to prevent lateral movement within the environment.
質問 # 96
An administrator receives reports that members in a delivery group that recently had a new gold image applied are being prompted to restart their non-persistent desktops in the middle of the workday.
Which setting in the recently applied gold image does the administrator need to address to resolve this issue?
- A. The Windows power profile settings are improperly configured.
- B. Windows Update policy is set to Automatic.
- C. The mandatory user profile is set to wrong profile extension.
- D. Java is checking for updates every 24 hours.
正解：B
解説：
In a non-persistent VDI environment, changes to the operating system should only occur within the Golden Image (or Master Image), not on the individual provisioned VMs. If the Windows Update policy is set to Automatic within the Gold Image, the clones generated from that image will independently check for updates, download them, and attempt to install them during the user's session.
This behavior often triggers a "Restart Required" prompt to the end-user to finish installing the updates. To prevent this disruption and ensure version consistency, Nutanix and VDI best practices dictate that the Windows Update service should be disabled or set to Manual in the Gold Image. Updates should be applied administratively to the Gold Image during a maintenance window, followed by a recompose/update of the machine catalog.
質問 # 97
An administrator is migrating Citrix back-end infrastructure to Citrix Cloud.
What three pieces of information are needed to connect Prism to Citrix Cloud?
- A. Citrix Login, Secret Key, Passphrase
- B. Customer ID, Citrix Cloud Provider, Prism Data Service IP Address
- C. Customer ID, Client ID. Secret Key
- D. Prism Data Service IP Address. Client ID, Passphrase
正解：C
解説：
https://docs.citrix.com/en-us/citrix-workspace/integrate.html
The Prism Citrix Cloud integration feature allows you to configure the Citrix Cloud settings in Prism Central and connect your Nutanix cluster as a resource location in Citrix Cloud4. This enables you to use Citrix Virtual Apps and Desktops service to deliver applications and desktops to your end users.
To use this feature, you need to meet some prerequisites, such as:
The Prism Central version must be 2020.11 or later.
The AOS version must be 5.15 LTSR or later.
The hypervisor must be AHV or ESXi.
You must have a valid Citrix Cloud account with access to Citrix Virtual Apps and Desktops service4.
One of the steps for configuring the Prism Citrix Cloud integration is to establish the connection to Citrix Cloud. To do this, you need to provide three pieces of information:
Customer ID: This is a unique identifier for your Citrix Cloud account that can be found in your profile settings2.
Client ID: This is a unique identifier for an API client that can access your Citrix Cloud account. You can create an API client in your identity and access management settings2.
Secret Key: This is a secret string that authenticates the API client. You can generate a secret key when you create an API client2.
質問 # 98
Where should an administrator configure AWS, Azure, and Google accounts within Frame?
- A. Cloud Account
- B. accounts
- C. Customers
- D. Organizations
正解：A
解説：
Frame is a cloud-native desktop-as-a-service platform that delivers virtual apps and desktops from multiple public clouds1. Frame allows administrators to manage various components of their cloud accounts easily from the Frame console1.
A cloud account is a logical grouping of resources that are associated with a specific cloud provider (such as AWS, Azure, or Google) and region1. A cloud account can have multiple virtual networks, master images, and instance types that can be used to create and run virtual apps and desktops1.
To configure AWS, Azure, and Google accounts within Frame, an administrator needs to go to the Cloud Accounts section of the Frame console1. There, the administrator can add new cloud accounts or edit existing ones by providing the required credentials and settings for each cloud provider12.
https://docs.frame.nutanix.com/platform/infrastructure/byo/cloud-accounts/
質問 # 99
An administrator has this configuration:
Category DesktopVM associated with a non-default storage policy
A Virtual Machine Desktop1 associated with the DesktopVM category
A virtual machine with the Enable 'Default-Storage' policy toggle switch enabled The administrator notices that expected storage policy settings are not applied.
What is the reason for this?
- A. Non-default storage policy gets precedence over the default storage policy.
- B. When two or more storage policies are applied, they both are ignored.
- C. Default storage policy is ignored when using categories.
- D. When two or more storage policies are applied, they both are applied.
正解：A
解説：
Comprehensive and Detailed Explanation From Exact Extract of Nutanix End User Computing documents:
According to the Prism Central Guide on Storage Policy Management and Precedence Rules:
* Precedence Rule: Nutanix documentation explicitly states: "If you assign a category associated with a non-default storage policy to an entity and also enable the Enable 'Default-Storage' policy toggle switch, the non-default storage policy gets precedence over the default storage policy."
* Explanation: The "Default-Storage" toggle acts as a fallback or baseline policy assignment (specifically linking the VM to the Storage: $Default category). However, if the administrator specifically tags the VM with a user-defined category (like DesktopVM) that has its own specific storage policy, the system honors the specific (non-default) policy over the generic default one.
* Result: The "expected" settings (if the administrator expected the Default policy to override the specific one because they toggled the switch) are not applied because the specific category policy takes priority.
質問 # 100
An administrator has added a tagged VLAN to virtual switch vs1 to support virtual machine traffic. While troubleshooting network utilization, it is observed that only one of the physical NICs in the bond is carrying VM traffic.
What can be done to better balance VM traffic?
- A. Increase the MTU to allow jumbo frames.
- B. Move VM traffic to the default virtual switch.
- C. Update the virtual switch to Active-Active.
- D. Add a second vNIC to the virtual machine.
正解：C
解説：
In Nutanix AHV networking, the default bond mode for a virtual switch is Active-Backup. In this mode, all traffic flows through a single active physical uplink, while other uplinks remain in standby mode to be used only in the event of a failure. This explains the observation that "only one of the physical NICs... is carrying VM traffic." To utilize multiple physical uplinks simultaneously and balance the traffic, the administrator must change the bond mode to an Active-Active configuration. In AHV, this is achieved by configuring the bond mode to Balance-SLB (Source Load Balancing) or Balance-TCP (LACP). These modes distribute VM traffic across all available physical interfaces in the bond, thereby balancing the load.
質問 # 101
......
リアル試験問題と解答Nutanix NCP-EUC問題集はここに：https://drive.google.com/open?id=1IDMpAHcnbJsSIP0TU-Hv6Bx3SbRyizEv
最新 [2026年08月] 効果的な学習法で試験合格できるNCP-EUC：https://jp.fast2test.com/NCP-EUC-premium-file.html