[2025年11月10日] 365日更新、有効なAZ-801知能問題集 [Q62-Q79]

[2025年11月10日] 365日更新、有効なAZ-801知能問題集

ベスト品質のAZ-801試験問題集でMicrosoftテスト高得点を目指そう

質問 # 62
You have a failover cluster named Cluster1 that contains the nodes shown in the following table.

A File Server for general use cluster role named HAFS is configured as shown in the General exhibit (Click the General tab.)

正解：

解説：
Explanation

質問 # 63
You have an Azure virtual machine named VM1 that runs Windows Server.
When you attempt to install the Azure Performance Diagnostics extension on VM I, the installation fails.
You need to identify the cause of the installation failure.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Sign into VM1 and verify the MonitoringAgentlog file.
B. From the Azure portal, view the activity log for VM1.
C. From the Azure portal, view the alerts for VM1.
D. Sign in to VM1 and verify the WaAppAgentlog file.

正解：C、D

質問 # 64
You are planning the europe.fabrikam.com migration to support the on-premises migration plan-Where should you install the Password Export Server (PES) service, where should you generate the encryption key? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation

質問 # 65
You manage 200 physical servers that run Windows Server.
You plan to migrate the servers to Azure.
You need to prepare for discovery of the servers by using Azure Migrate.
Which three actions should you perform in sequence on a physical server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-physical

質問 # 66
You are planning the europe.fabrikam.com migration to support the on-premises migration plan-Where should you install the Password Export Server (PES) service, where should you generate the encryption key?
To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:

質問 # 67
You have an on-premises network and an Azure virtual network.
You establish a Site-to-Site VPN connection from the on-premises network to the Azure virtual network, but the connection frequently disconnects.
You need to debug the IPsec tunnel from Azure.
Which Azure VPN Gateway diagnostic log should you review?

A. TunnelDiagnosticLog
B. RouteDiagnosticLog
C. GatewayDiagnosticLog
D. IKEDiagnosticLog

正解：A

解説：
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/troubleshoot-vpn-with-azure-diagnostics

質問 # 68
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit (Click the General Tat) The failover tab in App1 Properties is shown in the failover exhibit (Click the Failover tab.) Server 1 shuts down unexpectedly.
You need to ensure that when you start Server 1. App1 continues to run on Server2 Solution: From the General settings, you increase the priority of Server2 in the Preferred Owners list.
Does this meet the goal?

A. NO
B. Yes

正解：A

質問 # 69
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an on-premises server named Server1 that runs Windows Server.
You have a Microsoft Sentinel instance.
You add the Windows Firewall data connector in Microsoft Sentinel.
You need to ensure that Microsoft Sentinel can collect Windows Firewall logs from Server1.
Solution: You install the Log Analytics agent on Server1
Does this meet the goal?

A. Yes
B. No

正解：A

質問 # 70
You have 50 on-premises servers that run Windows Server. You have an Azure subscription that contains 50 virtual machines that run Windows Server.
You need to create an Azure Monitor alert that will be triggered if one of the servers or virtual machines has less than 10 percent available disk space.
What should you do first?

A. Create an Alert Rule
B. Install the Azure Monitor agent on each server.
C. Create a Log Analytics workspace and configure the Agent management settings.
D. Enable System Insights on each server.

正解：A

解説：
https://learn.microsoft.com/en-us/answers/questions/165893/help-to-set-up-azure-alert-for-disk-space-alert-wh.html

質問 # 71
You have a failover cluster named Cluster1 that contains three nodes.
You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role.
What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/windows-server/failover-clustering/sofs-overview

質問 # 72
You need to meet the technical requirements for Cluster2.
Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解：

解説：

Explanation
Text Description automatically generated

Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-tutorial

質問 # 73
You have the servers shown in the following table.

You plan to migrate file shares from Server1 to Server2.

正解：

解説：

Explanation
Server 2
Server 1

質問 # 74
With which servers can Server1 and Server3 communicate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:
Graphical user interface, text, application, chat or text message Description automatically generated

質問 # 75
You have an Azure subscription that contains an Azure Recovery Services vault.
You have an on-premises physical server that runs Windows Server.
You need to back up the server daily to Azure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/azure/backup/tutorial-backup-windows-server-to-azure

質問 # 76
You have two servers that have the Web Server (IIS) server role installed. The servers are configured as shown in the following table.

Both servers are configured to enable website deployment by using the Web Deployment Tool. Server1 hosts a website named Site1 that has Web Deploy Publishing configured.
You plan to migrate Site1 to Server2.
You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:

Reference:
https://docs.microsoft.com/en-us/iis/publish/using-web-deploy/synchronize-iis

質問 # 77
You have 100 Azure virtual machines that run Windows Server. The virtual machines are onboarded to Microsoft Defender for Cloud.
You need to shut down a virtual machine automatically if Microsoft Defender for Cloud generates the "Antimalware disabled in the virtual machine" alert for the virtual machine.
What should you use in Microsoft Defender for Cloud?

A. adaptive network hardening
B. a workbook
C. a logic app
D. a security policy

正解：C

解説：
Reference:
https://docs.microsoft.com/en-us/azure/defender-for-cloud/managing-and-responding-alerts

質問 # 78
You have a Hyper-V failover cluster named Cluster1 that uses a cloud witness. Cluster1 hosts a virtual machine named VM1 that runs Windows Server.
You need to fail over VM1 automatically to a different node when a service named Service1 on VM1 fails.
What should you do on Cluster1 and VM1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.