[2025年09月] 更新されたのはFortinet FCP_FAZ_AN-7.4問題集PDFオンラインエンジン
FCP_FAZ_AN-7.4.PDFで問題解答PDFサンプル問題は信頼され続ける
Fortinet FCP_FAZ_AN-7.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 18
You created a playbook on FortiAnalyzer that uses a FortiOS connector.
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stich are available in the FortiOS connector?
- A. FortiAnalyzer Event Handler
- B. Fabric Connector event
- C. Incoming webhook
- D. FortiOS Event Log
正解：C
解説：
When using FortiAnalyzer to create playbooks that interact with FortiOS devices, anIncoming Webhook trigger is required on the FortiGate side to make the actions in an automation stitch accessible through the FortiOS connector. The incoming webhook trigger allows FortiAnalyzer to initiate actions on FortiGate by sending HTTP POST requests to specified endpoints, which in turn trigger automation stitches defined on the FortiGate.
Here's an analysis of each option:
* Option A: FortiAnalyzer Event Handler
* This is incorrect. The FortiAnalyzer Event Handler is used within FortiAnalyzer itself for handling log events and alerts, but it does not trigger automation stitches on FortiGate.
* Option B: Fabric Connector event
* This is incorrect. Fabric Connector events are related to Fortinet's Security Fabric integrations but are not specifically used to trigger FortiGate automation stitches from FortiAnalyzer.
* Option C: FortiOS Event Log
* This is incorrect. While FortiOS event logs can be used for monitoring, they are not designed to trigger automation stitches directly from FortiAnalyzer.
* Option D: Incoming webhook
* This is correct. The Incoming Webhook trigger on FortiGate enables it to receive requests from FortiAnalyzer, allowing playbooks to activate automation stitches defined on the FortiGate device. This method is commonly used to integrate actions from FortiAnalyzer to FortiGate via the FortiOS connector.
References: According to FortiOS and FortiAnalyzer documentation, when integrating FortiAnalyzer playbooks with FortiGate automation stitches, the recommended trigger type on FortiGate is anIncoming Webhook, allowing FortiAnalyzer to interact with FortiGate's automation framework through the FortiOS connector.
質問 # 19
Which two statements about playbook execution are true? (Choose two)
- A. Even I the playbook status is Failed, individual tasks may have succeeded.
- B. The Playbook Monitor provides troubleshooting logs
- C. You can run the default debugging playbook to investigate playbook errors.
- D. FortiAnalyzer will not commit changes made by a Failed playbook
正解：B、D
質問 # 20
Which statement regarding macros on FortiAnalyzer is true?
- A. Macros are predefined templates for reports and cannot be customized.
- B. Macros are useful in generating excel log files automatically based on the report settings.
- C. Macros are supported only on the FortiGate ADOMs.
- D. Macros are ADOM-specific and each ADOM type have unique macros relevant to that ADOM.
正解：B
解説：
Macros in FortiAnalyzer are used to streamline reporting tasks by automating data extraction and report generation. Here's a breakdown of each option to determine the correct answer:
Option A - Macros are Predefined Templates for Reports and Cannot be Customized:
This statement is incorrect. Macros in FortiAnalyzer are not simply fixed templates; they allow for customization to tailor data extraction and reporting based on specific needs and configurations.
Conclusion: Incorrect.
Option B - Macros are Useful in Generating Excel Log Files Automatically Based on the Report Settings:
This statement is accurate. Macros in FortiAnalyzer can be configured to automate the generation of reports, including outputting log data to Excel format based on predefined report settings. This makes them especially useful for scheduled reporting and data analysis.
Conclusion: Correct.
Option C - Macros are ADOM-Specific and Each ADOM Type Has Unique Macros Relevant to that ADOM:
Macros are not limited to specific ADOMs, nor are they ADOM-specific. Macros can be applied across various ADOMs based on report configurations but are not inherently tied to or unique for each ADOM type.
Conclusion: Incorrect.
Option D - Macros are Supported Only on the FortiGate ADOMs:
This is not true. Macros in FortiAnalyzer are not restricted to FortiGate ADOMs; they can be utilized across different ADOMs that FortiAnalyzer manages.
Conclusion: Incorrect.
Conclusion:
Correct Answe r : B. Macros are useful in generating excel log files automatically based on the report settings.
This answer correctly describes the functionality of macros in FortiAnalyzer, emphasizing their role in automating report generation, especially for Excel log files.
Reference:
FortiAnalyzer 7.4.1 documentation on macros and report generation functionalities.
質問 # 21
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
- B. FortiAnalyzer flags the associated host for further analysis.
- C. The detection engine classifies those logs as Suspicious
- D. A new Infected entry is added for the corresponding endpoint.
正解：A
質問 # 22
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin" and coming from Laptop1.
Which filter will achieve the desired result?
- A. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
- B. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
- C. operation-login & dstip==10.1.1.210 & userl-admin
- D. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
正解：D
質問 # 23
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Log upload
- B. Log forwarding an aggregation mode
- C. Indicators of Compromise
- D. Log fetching
正解：D
質問 # 24
What is the purpose of output variables?
- A. To use the output of the previous task as the input of the current task
- B. To display details of the connectors used by a playbook
- C. To store playbook execution statistics
- D. To save all the task settings when a playbook is exported
正解：A
質問 # 25
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It reduces the log insert lag rate.
- B. It reduces report generation time.
- C. It provides diagnostics on report generation time.
- D. It automatically updates the hcache when new logs arrive.
正解：B、D
質問 # 26
What should you always do after erasing the FortiAnalyzer configuration on flash?
- A. Run the execute format disk command
- B. Run the execute reset all-settings command
- C. Run the execute reboot command
- D. Perform a system backup
正解：A
質問 # 27
Which statement about the FortiSOAR management extension is correct?
- A. It runs as a docker container on FortiAnalyzer.
- B. It does not include a limited trial by default.
- C. It requires a FortiManager configured to manage FortiGate.
- D. It requires a dedicated FortiSOAR device or VM.
正解：D
解説：
The FortiSOAR management extension is designed as an independent security orchestration, automation, and response (SOAR) solution that integrates with other Fortinet products but requires its own dedicated device or virtual machine (VM) environment. FortiSOAR is not natively integrated as a container or service within FortiAnalyzer or FortiManager, and it operates separately to manage complex security workflows and incident responses across various platforms.
Let's examine each option to determine the correct answer:
* Option A: It requires a FortiManager configured to manage FortiGate
* This is incorrect. FortiSOAR operates independently of FortiManager. While FortiSOAR can receive input or data from FortiGate (often managed by FortiManager), it does not require FortiManager to be part of its setup.
* Option B: It runs as a docker container on FortiAnalyzer
* This is incorrect. FortiSOAR does not run as a container within FortiAnalyzer. It requires its own dedicated environment, either as a physical device or a virtual machine, due to the resource requirements and specialized functions it performs.
* Option C: It requires a dedicated FortiSOAR device or VM
* This is correct. FortiSOAR is deployed as a standalone device or VM, which enables it to handle the intensive processing needed for orchestrating security operations, integrating with third-party tools, and automating responses across an organization's security infrastructure.
* Option D: It does not include a limited trial by default
* This is incorrect. FortiSOAR installations may come with trial options or demos in specific scenarios, especially for evaluation purposes. This depends on licensing and deployment policies.
References: The FortiSOAR platform, as outlined in Fortinet product documentation, is a standalone SOAR solution that requires a dedicated device or VM for deployment. It integrates with Fortinet's Security Fabric but operates separately from FortiAnalyzer, FortiManager, and FortiGate, focusing on advanced incident management and security automation.
質問 # 28
Which statement about the FortiSIEM management extension is correct?
- A. Its use of the available disk space is capped at 50%.
- B. It requires a licensed FortiSIEM supervisor.
- C. It can be installed as a dedicated VM.
- D. It allows you to manage the entire life cycle of a threat or breach.
正解：C
質問 # 29
Which two statements about exporting and importing playbacks are true? (Choose two.)
- A. You can import a playbook even if there is another one win the same name in the destination
- B. You can export only one playbook at a time.
- C. A playbook that was disabled when it was exported mil be disabled when it is imported.
- D. Playbooks can so imported 10 a different FortiAnayzer device, but only if the connectors already exist
正解：A、B
質問 # 30
View the exhibit.
What does the data point at 14:35 tell you?
- A. The sqlplugind daemon is ahead in indexing by one log.
- B. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- C. FortiAnalyzer is indexing logs faster than logs are being received.
- D. FortiAnalyzer is dropping logs.
正解：A
質問 # 31
Which two actions should an administrator take to view Compromised Hosts on FortiAnalyzer?
(Choose two.)
- A. Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.
- B. Make sure all endpoints are reachable by FortiAnalyzer.
- C. Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.
- D. Enable device detection on an interface on the FortiGate devices that are connected to the FortiAnalyzer device.
正解：A、C
質問 # 32
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. Logs are being dropped
- B. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- C. The sqlplugind daemon is behind in log indexing by two logs
- D. The received rate is almost at its maximum for this device
正解：B
質問 # 33
Which item must you configure on FortiAnalyzer to email generated reports automatically?
- A. Report scheduling
- B. Output profile
- C. SNMP server
- D. SFTP server
正解：B
質問 # 34
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To improve DNS response times
- B. To resolve host names
- C. To properly correlate logs
- D. To use real-time forwarding
正解：C
質問 # 35
Which two statement regarding the outbreak detection service are true? (Choose two.)
- A. New alerts are received by email.
- B. An additional license is required.
- C. It automatically downloads new event handlers and reports.
- D. Outbreak alerts are available on the root ADOM only.
正解：C、D
質問 # 36
What is the purpose of using prefilters when configuring event handlers?
- A. They limit which logs are checked for matches by the other filters.
- B. They can filter the logs before they are processed by FortiAnalyzer
- C. They are common filters applied simultaneously to all event handlers.
- D. They download new filters to be used in event handlers.
正解：A
質問 # 37
Which connector type is enabled by default to be used in playbooks?
- A. Local connector
- B. Fabric
- C. FortiOS
- D. EMS
正解：A
質問 # 38
......
Fortinet FCP_FAZ_AN-7.4問題集PDFのベストを目指すなら問題集を使おう 目指そう高得点：https://jp.fast2test.com/FCP_FAZ_AN-7.4-premium-file.html
FCP in Security Operations FCP_FAZ_AN-7.4試験と認定テストエンジン：https://drive.google.com/open?id=1w3THW6FD0jJ0mRnG6BO9Hi526W8BbrLr