[2025年04月24日]Fast2test D-VXR-DY-01問題集でDell Hyperconverged Infrastructure合格確定させる練習問題集
EMC D-VXR-DY-01実際にある問題とブレーン問題集
質問 # 130
A customer requires a VxRail Stretched Cluster with E560F nodes in its minimal configuration. In addition, the cluster should be able to use both erasure coding options.
Which setup fulfills the requirement?
- A. 6+6 nodes
- B. 8+8 nodes
- C. 4+4 nodes
- D. 3+3 nodes
正解：D
質問 # 131
An implementation engineer needs to validate the VxRail network configuration.
Where can they obtain the NVT for VxRail?
- A. Dell VxRail Fast Pass
- B. Dell Technologies Central
- C. Dell Technologies Information Hub
- D. Dell VxRail Expert Channel
正解：B
質問 # 132
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?
- A. Node hardware must be identical to the other three nodes
- B. New node must be at the same VxRail version as existing nodes
- C. PCIe network card must be added to all nodes
- D. Node requires only the same drive configuration
正解：B
質問 # 133
In which VxRail model is the IDRAC NIC Selection Setting set to LOM1?
- A. G560
- B. S570
- C. G410
- D. E560
正解：A
質問 # 134
What is the minimum number of VxRail hosts required if FTT = 1 and FTM is set to Erasure Coding?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 135
A 4 node VxRail solution will be deployed.
Based on the exhibit, what will be the host name assigned to the last node in the cluster?
- A. MyVxRaild.mycompany.com
- B. MyVxRail-d.mycompany.com
- C. MyVxRail-4.mycompany.com
- D. MyVxRail04.mycompany.com
正解：B
質問 # 136
An existing Dell EMC customer wants to deploy a new VxRail cluster on premise. Each node of the new cluster will be configured with a single disk group containing one 1.6 TB Flash drive for the capacity tier. The customer plans on using mirroring and needs to have at least 2 TB of usable capacity in the vSAN datastore.
What is the minimum number of VxRail nodes required?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 137
What accurately describes the positioning of a VxRail?
- A. Software defined solution with rack scale and integrated networking
- B. Converged architecture with enterprise grade resiliency
- C. Can start small and grow with a low entry cost
- D. Can start small and grow to hundreds of nodes
正解：B
質問 # 138
What data protection option is included with VxRail?
- A. RecoverPoint for VM Avamar
- B. vSphere Replication NetWorker
- C. PowerProtect Software Data Domain Cloud Tier
- D. RecoverPoint for VM vSphere Replication
正解：D
質問 # 139
A newly installed VxRail system appears to have poor vSAN performance for all VMs on the cluster.
What can be used to identify the issue?
- A. esxtop with x view
- B. resxtop with s view
- C. esxtop with v view
- D. resxtop with d view
正解：B
質問 # 140
A local upgrade is planned for a VxRail 7.0.xxx cluster.
For which Service VMs are snapshots recommended prior to the upgrade?
- A. VxRail Manager
VMware Log Insight - B. VMware vCenter Appliance
VxRail Manager - C. VMware vCenter Appliance
VMware vCenter Server PSC - D. VMware vCenter Appliance
VMware vRealize Operations
正解：B
質問 # 141
What is the maximum number of VxRail 4.7.x Clusters you can create with three G Series nodes and five E Series nodes?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 142
During deployment of a VxRail E560F cluster the data on the node becomes corrupted due to a misconfiguration.
Which option in the RASR menu should be selected to ensure the quickest restart of the installation?
- A. Factory Reset
- B. RASR Reset
- C. Install DUPs
- D. Create RASRUSB
正解：A
質問 # 143
An implementation engineer is configuring the network firewall to support a VxRail installation.
Where can they find the necessary firewall rules?
- A. VxRail Configuration Portal
- B. As-Built Configuration Report
- C. Rack worksheet of the Network PEQ
- D. Network Validation Tool
正解：B
質問 # 144
When installing VxRail hardware and configuring iDRAC settings, which methods can be used per SolVe documentation?
- A. Using System Setup during Post
Micro USB Direct connection to node - B. Press F10 on post, use System setup
Use Lifecycle controller interface - C. Using Lifecycle controller interface
DB9 to USB cable to configure - D. Press F2 on post, use System setup
DB9 to USB cable to configure
正解：A
質問 # 145
What is a requirement to set up a supported VxRail Stretched Cluster?
- A. Identical VxRail nodes
- B. All-Flash configuration
- C. VxRail nodes with 10 GbE
- D. G560 with one chassis
正解：C
質問 # 146
When populating the VxRail Installation wizard for an External vCenter solution, what is the correct format for hostnames?
- A. vCenter, PSC, and VxRail Manager should use FQDN
- B. VxRail Manager and vCenter should use FQDN; PSC should use host name only
- C. vCenter and PSC should use FQDN; VxRail Manager should use host name only
- D. vCenter, PSC, and VxRail Manager should use host name only
正解：D
質問 # 147
......
最新D-VXR-DY-01合格保証 試験問題集でには正確で最新な 問題：https://jp.fast2test.com/D-VXR-DY-01-premium-file.html