[2025年04月]更新のNetskope NSK200テストエンジンとPDFで完全版無料問題集を無料提供
最新版を今すぐ試そうNSK200認定有効な試験問題集
Netskope NSK200 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 12
Review the exhibit.
You are troubleshooting a Netskope clientfor user Clarke which remains in a disabled state after being installed. After looking at various logs, you notice something which might explain the problem. The exhibit is an excerpt from the nsADImporterLog.log.
Referring to the exhibit, what is the problem?
- A. The client was not Installed with administrative privileges.
- B. The Active Directory user is not synchronized to the Netskope tenant.
- C. The client traffic is decrypted by a network security device.
- D. This is normal; it might take up to an hour to be enabled.
正解：B
解説：
Explanation
The problem is B. The Active Directory user is not synchronized to the Netskope tenant. This is evident from the log message "WARNING No mail ID for the user: Clarke, Daxmeifield, DC=local, skipping use". This means that the user Clarke does not have a valid email address in the Active Directory, which is required for the Netskope client to work. The Netskope client uses the email address of the user to authenticate and enable the client. Therefore, option B is correct and the other options are incorrect.
質問 # 13
Your company wants to know if there has been any unusual user activity. In the UI, you go to Skope IT -> Alerts.
Which two types of alerts would you filter to find this information? (Choose two.)
- A. Alert type = uba
- B. Alert type = anomaly
- C. Alert type = policy
- D. Alert type = malware
正解：A、B
解説：
To identify unusual user activity, filter alerts by "uba" (User Behavior Analytics) and "anomaly." UBA and anomaly alerts highlight deviations from typical user behavior, which are indicators of unusual or potentially risky activities.
質問 # 14
An engineering firm is using Netskope DLP to identify and block sensitive documents, including schematics and drawings. Lately, they have identified that when these documents are blocked, certain employees may be taking screenshots and uploading them. They want to block any screenshots from being uploaded.
Which feature would you use to satisfy this requirement?
- A. exact data match (EDM)
- B. document fingerprinting
- C. ML image classifier
- D. optical character recognition (OCR)
正解：C
解説：
Explanation
To block any screenshots from being uploaded, the engineering firm should use the ML image classifier feature of Netskope DLP. This feature uses machine learning to detect sensitive information within images, such as screenshots, whiteboards, passports, driver's licenses, etc. The firm can create a DLP policy that blocks any image upload that matches the screenshot classifier. This will prevent employees from circumventing the DLP controls by taking screenshots of sensitive documents. References: Improved DLP Image Classifiers, Netskope Data Loss Prevention, The Importance of a Machine Learning-Based Source Code Classifier
質問 # 15
Your learn is asked to Investigate which of the Netskope DLP policies are creating the most incidents. In this scenario, which two statements are true? (Choose two.)
- A. You can create a report using Reporting or Advanced Analytics.
- B. The Skope IT Alerts tab will list the top five DLP policies.
- C. You can see the top Ave DLP policies triggered using the Analyze feature
- D. The Skope IT Applications tab will list the top five DLP policies.
正解：A、C
解説：
To investigate which of the Netskope DLP policies are creating the most incidents, the following two statements are true:
* You can see the top five DLP policies triggered using the Analyze feature. The Analyze feature allows you to create custom dashboards and widgets to visualize and explore your data. You can use the DLP Policy widget to see the top five DLP policies that generated the most incidents in a given time period3.
* You can create a report using Reporting or Advanced Analytics. The Reporting feature allows you to create scheduled or ad-hoc reports based on predefined templates or custom queries. You can use the DLP Incidents by Policy template to generate a report that shows the number of incidents per DLP policy4. The Advanced Analytics feature allows you to run SQL queries on your data and export the results as CSV or JSON files. You can use the DLP_INCIDENTS table to query the data by policy name and incident count5.
The other two statements are not true because:
* The Skope IT Applications tab will not list the top five DLP policies. The Skope IT Applications tab shows the cloud app usage and risk summary for your organization. It does not show any information about DLP policies or incidents6.
* The Skope IT Alerts tab will not list the top five DLP policies. The Skope IT Alerts tab shows the alerts generated by various policies and profiles, such as DLP, threat protection, IPS, etc. It does not show the number of incidents per policy, only the number of alerts per incident7.
質問 # 16
You are configuring GRE tunnels from a Palo Alto Networks firewall to a Netskope tenant with the Netskope for Web license enabled. Your tunnel is up as seen from the Netskope dashboard. You are unable to ping hosts behind the Netskope gateway.
Which two statements are true about this scenario? (Choose two.)
- A. You can only ping the probe IP provided by Netskope.
- B. Netskope only supports Web traffic through the tunnel.
- C. There is no client installed on the source hosts in your network.
- D. You need to call support to enable the GRE POP selection feature.
正解：A、B
解説：
Netskope's GRE tunneling supports only web traffic, which means ICMP traffic (ping) is not supported for hosts behind the Netskope gateway. You may, however, ping the probe IP provided by Netskope to test connectivity, as this IP is designated for diagnostics.
質問 # 17
You want to allow both the user identities and groups to be imported in the Netskope platform. Which two methods would satisfy this requirement? (Choose two.)
- A. Use Directory Importer.
- B. Use Bulk Upload with a CSV file.
- C. Use System for Cross-domain Identity Management (SCIM).
- D. Use Manual Entries.
正解：B、C
解説：
Explanation
To allow both the user identities and groups to be imported in the Netskope platform, you can use either the System for Cross-domain Identity Management (SCIM) method or the Bulk Upload with a CSV file method.
Both of these methods allow for the import of user identities and groups from different identity providers (IdPs) that support SCIM or CSV formats. The SCIM method is recommended for large-scale deployments, as it automates the exchange of user identity information across apps for user provisioning. The CSV method is recommended for small-scale deployments, as it allows for manual upload of user details in a comma-separated values file. The other methods are not suitable for this requirement. The Manual Entries method does not allow for the import of groups, only user emails. The Directory Importer method does not import users and groups directly into the Netskope platform, but rather connects to an Active Directory or LDAP server and periodically fetches user and group information.
References: Provisioning Users for Netskope Client2, SCIM Integration3, Bulk Upload via CSV file
質問 # 18
Your company asks you to use Netskope to integrate with Endpoint Detection and Response (EDR) vendors such as Crowdstrike.
Which two requirements are needed for a successful integration and sharing of threat data? (Choose two.)
- A. API Client ID
- B. Device classification
- C. Remediation profile
- D. Custom log parser
正解：A、C
解説：
Integrating with EDR vendors like Crowdstrike requires an API Client ID for authentication and data sharing.
A remediation profile is also necessary to define automated actions that can be taken when threats are detected, ensuring effective response to endpoint threats.
質問 # 19
You are currently migrating users away from a legacy proxy to the Netskope client in the company's corporate offices. You have deployed the client to a pilot group; however, when the client attempts to connect to Netskope, it fails to establish a tunnel.
In this scenario, what would cause this problem?
- A. The client cannot reach dns.google for EDNS resolution.
- B. The legacy proxy is intercepting SSL/TLS traffic to Netskope.
- C. The corporate firewall is blocking UDP port 443 to Netskope.
- D. The corporate firewall is blocking the Netskope EPoT address.
正解：C
解説：
The corporate firewall blocking UDP port 443 to Netskope could cause tunnel establishment failures.
Netskope clients rely on this port for secure tunneling (via DTLS), so ensuring UDP port 443 is open is essential for connectivity. Additionally, legacy proxies intercepting traffic could also disrupt the SSL/TLS traffic necessary for the Netskope tunnel.
質問 # 20
Review the exhibit.
You want to discover new cloud applications in use within an organization.
Referring to the exhibit, which three methods would accomplish this task? (Choose three.)
- A. Upload firewall or proxy logs directly into the Netskope platform.
- B. Set up API-enabled Protection instances for SaaS applications.
- C. Deploy an On-Premises Log Parser (OPLP).
- D. View "All Apps" within the Cloud Confidence Index (CCI) In the Netskope Ul.
- E. Use forward proxy steering methods to direct cloud traffic to Netskope
正解：A、C、E
解説：
Explanation
To discover new cloud applications in use within an organization, three methods that would accomplish this task are B. Deploy an On-Premises Log Parser (OPLP), C. Use forward proxy steering methods to direct cloud traffic to Netskope, and E. Upload firewall or proxy logs directlyinto the Netskope platform. An On-Premises Log Parser (OPLP) is a software component that allows you to parse logs from your on-premises firewall or proxy devices and send them to the Netskope cloud for analysis and reporting. You can deploy an OPLP on a Linux server in your network and configure it to connect to your log sources and upload logs periodically or in real time3. A forward proxy steering method is a way of directing your web traffic from your users' devices or browsers to the Netskope cloud for inspection and policy enforcement. You can use forward proxy steering methods such as PAC file, VPN, or inline proxy to steer traffic to Netskope and discover new cloud applications in use4. Uploading firewall or proxy logs directly into the Netskope platform is a way of manually sending logs from your log sources to the Netskope cloud for analysis and reporting. You can upload firewall or proxy logs directly into the Netskope platform by going to SkopeIT > Settings > Log Upload > New Log Upload and selecting the log source type, file format, log file, and time zone5. Therefore, options B, C, and E are correct and the other options are incorrect. References: On-Premises Log Parser - Netskope Knowledge Portal, Traffic Steering - Netskope Knowledge Portal, Upload Firewall or Proxy Logs Directly into the Platform - Netskope Knowledge Portal
質問 # 21
You want to provision users and groups to a Netskope tenant. You have Microsoft Active Directory servers hosted in two different forests. Which statement is true about this scenario?
- A. You can use the Netskope Adapter Tool for user provisioning.
- B. You cannot provision users until you migrate to Azure AD or Okta.
- C. You can use the Netskope virtual appliance for user provisioning
- D. You can use SCIM version 2 for user provisioning.
正解：D
解説：
Explanation
You can use SCIM version 2 for user provisioning in this scenario. SCIM (System for Cross-domain Identity Management) is a standard protocol for exchanging identity information across different cloud applications.
Netskope supports SCIM version 2 and can integrate with identity providers (IdPs) that follow the same standard, such as Microsoft Azure AD, Okta, OneLogin, and Ping Identity. You can use SCIM to provision users and groups from multiple Active Directory forests to a Netskope tenant. The other options are not valid for this scenario. The Netskope Adapter Tool and the Netskope virtual appliance are used for user identification, not provisioning. They can only connect to one Active Directory forest at a time. You do not need to migrate to Azure AD or Okta to provision users, as Netskope supports other IdPs that use SCIM as well. References: Provisioning Users for Netskope Client1, SCIM Integration2
質問 # 22
You have deployed Netskope Secure Web Gateway (SWG). Users are accessing new URLs that need to be allowed on a daily basis. As an SWG administrator, you are spending a lot of time updating Web policies.
You want to automate this process without having to log into the Netskope tenant Which solution would accomplish this task?
- A. You can use Cloud Risk Exchange.
- B. You can use REST API to update the URL list.
- C. You can minimize your work by sharing URLs with Netskope support.
- D. You can use Cloud Log Shipper.
正解：B
解説：
To automate the process of updating Web policies without having to log into the Netskope tenant, you can use REST API to update the URL list. REST API is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths1. You can use REST API to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses2. This can help you automate or script the management of your URL lists and keep them up- to-date. Therefore, option D is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal
質問 # 23
Your organization has a homegrown cloud application. You are required to monitor the activities that users perform on this cloud application such as logins, views, and downloaded files. Unfortunately, it seems Netskope is unable to detect these activities by default.
How would you accomplish this goal?
- A. Ensure that the cloud application is added as a steering exception.
- B. Enable access to the application with Netskope Private Access.
- C. Create a new cloud application definition using the Chrome extension.
- D. Ensure that the application is added to the SSL decryption policy.
正解：C
解説：
Explanation
To monitor the activities that users perform on a homegrown cloud application, you need to create a new cloud application definition using the Chrome extension. The Chrome extension is a tool that allows you to record the traffic and activities of any web-based application and create a custom app definition that can be imported into your Netskope tenant1. This way, you can enable Netskope to detect and analyze the activities of your homegrown cloud application and apply policies accordingly. Therefore, option D is correct and the other options are incorrect. References: Creating a Cloud App Definition - Netskope Knowledge Portal
質問 # 24
Review the exhibit.
You are asked to create a DLP profile that will ensure that the data shown in the exhibit cannot be uploaded to a user's personal Google Drive.
What must be used to accomplish this task?
- A. INTL-PAN-Name rule
- B. document fingerprinting
- C. ML image classifier
- D. optical character recognition
正解：D
解説：
To create a DLP profile that will ensure that the data shown in the exhibit cannot be uploaded to a user's personal Google Drive, you need to use optical character recognition (OCR). OCR is a feature that allows you to detect and extract text from images and scanned documents. You can use OCR in your DLP profiles to identify sensitive data that is embedded or hidden in images1. In the exhibit, we can see that the data is a credit card number, which is a type of sensitive data that can be easily identified by OCR. You can create a DLP profile that uses OCR and matches the credit card number data identifier or a custom regex expression. You can then apply an action such as block, alert, or quarantine to prevent the data from being uploaded to Google Drive2. Therefore, option C is correct and the other options are incorrect. References: Optical Character Recognition (OCR) - Netskope Knowledge Portal, Add a Policy for Data Protection - Netskope Knowledge Portal
質問 # 25
Netskope is being used as a secure Web gateway. Your organization's URL list changes frequently. In this scenario, what makes It possible for a mass update of the URL list in the Netskope platform?
- A. REST API v2
- B. Assertion Consumer Service URL
- C. Cloud Threat Exchange
- D. SCIM provisioning
正解：A
解説：
The method that makes it possible for a mass update of the URL list in the Netskope platform is A. REST API v2. REST API v2 is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths5. You can use REST API v2 to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses6. This can help you automate or script the management of your URL lists and keep them up-to-date. Therefore, option A is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal
質問 # 26
Your customer implements Netskope Secure Web Gateway to secure all Web traffic. While they have created policies to block certain categories, there are many new sites available dally that are not yet categorized. The customer's users need quick access and cannot wait to put in a request to gain access requiring a policy change or have the site's category changed.
To solve this problem, which Netskope feature would provide quick, safe access to these types of sites?
- A. Netskope Continuous Security Assessment (CSA)
- B. Netskope Remote Browser Isolation (RBI)
- C. Netskope SaaS Security Posture Management (SSPM)
- D. Netskope Cloud Firewall (CFW)
正解：B
解説：
To solve the problem of providing quick, safe access to uncategorized and risky websites, the Netskope feature that the customer should use is Netskope Remote Browser Isolation (RBI). Netskope RBI is a part of the Netskope Secure Web Gateway offering that intercepts a user's browsing session to a website, acting as a proxy that fetches the content for that user and renders the content in an isolated browsing instance. The rendered content is delivered to the user's browser as a safe stream of pixels. This safely silos the end user's device and the enterprise network and systems, separating it from their browsing activity and restricting the ability of an attacker to establish control and / or breach other systems and exfiltrate data1. Netskope RBI can be easily invoked with an 'isolate' policy action within the Netskope Security Cloud for any website category or domain2. Therefore, option B is correct and the other options are incorrect. References: Remote Browser Isolation - Netskope Knowledge Portal, Netskope Remote Browser Isolation - Netskope
質問 # 27
Review the exhibit.
You are asked to create a new role that allows analysts to view Events and Reports while providing user privacy. You need to avoid directly exposing identities and user location information.
Which three fields must you obfuscate in this scenario? (Choose three.)
- A. App names, URLs, and destination IPs
- B. User IPs
- C. User names
- D. Source location information
- E. File and object names
正解：B、C、D
解説：
To ensure user privacy in the Events and Reports view, obfuscate sensitive information like User IPs, User names, and Source location information. This helps protect identities and prevent location tracking of users while allowing visibility into activity details.
質問 # 28
Your small company of 10 people wants to deploy the Netskope client to all company users without requiring users to be imported using Active Directory, LDAP, or an IdP.
- A. Deploy the Netskope client using Microsoft GPO.
- B. Deploy the Netskope client using an email invitation.
- C. Deploy the Netskope client using SCCM.
- D. Deploy the Netskope client using JAMF.
正解：B
解説：
Deploying the Netskope client using an email invitation allows smaller companies to onboard users easily without relying on integration with AD, LDAP, or an IdP. This method is efficient for smaller teams that need a quick deployment without complex setup.
質問 # 29
You are testing policies using the DLP predefined identifier "Card Numbers (Major Networks; all)." No DLP policy hits are observed.
- A. You must normalize credit card numbers to 16-digit consecutive numbers.
- B. You must use the Netskope client to perform advanced DLP and optical character recognition.
- C. Your data must have valid credit card numbers.
- D. You must use Netskope API protection.
正解：C
解説：
For DLP policies to detect sensitive data like credit card numbers, the data must contain valid credit card numbers as defined by the DLP pattern. Invalid or incorrectly formatted numbers will not trigger DLP policy hits.
質問 # 30
Review the exhibit.
A security analyst needs to create a report to view the top five categories of unsanctioned applications accessed in the last 90 days. Referring to the exhibit, what are two data collections in Advanced Analytics that would be used to create this report? (Choose two.)
- A. Network Events
- B. Alerts
- C. Page Events
- D. Application Events
正解：A、D
解説：
Explanation
To create a report to view the top five categories of unsanctioned applications accessed in the last 90 days, the security analyst would need to use two data collections in Advanced Analytics: Application Events and Network Events. Application Events provide information about the cloud applications and websites accessed by users, such as app name, app category, app risk score, app instance, app version, and more. Network Events provide information about the network traffic generated by users, such as source IP, destination IP, protocol, port, bytes sent, bytes received, and more. By combining these two data collections, the security analyst can filter the events by app category, app risk score, and time range to create a report that shows the top five categories of unsanctioned applications accessed in the last 90 days. Alerts and Page Events are not relevant for this report. Alerts provide information about the alerts triggered by Real-time Protection or API Data Protection policies, such as alert type, alert severity, alert status, alert description, and more. Page Events provide information about the web pages visited by users, such as page title, page URL, page category, page risk score, page content type, and more. References: Advanced Analytics
質問 # 31
Your company has many users thatare remote and travel often. You want to provide the greatest visibility into their activities, even while traveling. Using Netskope. which deployment method would be used in this scenario?
- A. Use a GRE tunnel.
- B. Use proxy chaining.
- C. Use an IPsec tunnel.
- D. Use a Netskope client.
正解：D
解説：
Explanation
The best deployment method for remote and traveling users is to use a Netskope client. The Netskope client is a lightweight software agent that runs on the user's device and steers web and cloud traffic to the Netskope cloud for real-time inspection and policy enforcement1. The Netskope client provides an always-on end user remote access experience and avoids backhauling (or hairpinning) remote users through the corporate network to access applications in public cloud environments2. The Netskope client also supports offline mode, which allows users to work offline and sync their policies when they reconnect to the internet
質問 # 32
Your customer implements Netskope Secure Web Gateway to secure all Web traffic. While they have created policies to block certain categories, there are many new sites available dally that are not yet categorized. The customer's users need quick access and cannot wait to put in a request to gain access requiring a policy change or have the site's category changed.
To solve this problem, which Netskope feature would provide quick, safe access to these types of sites?
- A. Netskope Continuous Security Assessment (CSA)
- B. Netskope Remote Browser Isolation (RBI)
- C. Netskope SaaS Security Posture Management (SSPM)
- D. Netskope Cloud Firewall (CFW)
正解：B
解説：
Explanation
To solve the problem of providing quick, safe access to uncategorized and risky websites, the Netskope feature that the customer should use is Netskope Remote Browser Isolation (RBI). Netskope RBI is a part of the Netskope Secure Web Gateway offering that intercepts a user's browsing session to a website, acting as a proxy that fetches the content for that user and renders the content in an isolated browsing instance. The rendered content is delivered to the user's browser as a safe stream of pixels. This safely silos the end user's device and the enterprise network and systems, separating it from their browsing activity and restricting the ability of an attacker to establish control and / or breach other systems and exfiltrate data1. Netskope RBI can be easily invoked with an 'isolate' policy action within the Netskope Security Cloud for any website category or domain2. Therefore, option B is correct and the other options are incorrect. References: Remote Browser Isolation - Netskope Knowledge Portal, Netskope Remote Browser Isolation - Netskope
質問 # 33
You are provisioning Netskope users from Okta with SCIM Provisioning, and users are not showing up in the tenant. In this scenario, which two Netskope components should you verify first In Okta for accuracy?
(Choose two.)
- A. SCIM server URL
- B. OAuth token
- C. IdP Entity ID
- D. Netskope SAML certificate
正解：A、B
解説：
Explanation
To provision Netskope users from Okta with SCIM Provisioning, and users are not showing up in the tenant, the two Netskope components that you should verify first in Okta for accuracy are B. OAuth token and D.
SCIM server URL. The OAuth token is a credential that allows Okta to authenticate with the Netskope SCIM server and perform user provisioning operations4. The SCIM server URL is the endpoint that Okta uses to communicate with the Netskope SCIM server and send user data5. Both of these components must be configured correctly in Okta for the SCIM Provisioning to work. You can find them in the Netskope UI under Settings > Tools > Directory Tools > SCIM Integration6. Therefore, options B and D are correct and the other options are incorrect. References: SCIM-Based User Provisioning - Netskope Knowledge Portal, Netskope + Okta Use Case: Provisioning Users and Managing Groups Using SCIM - Netskope, Netskope Partner Okta - Netskope
質問 # 34
Your company has many users that are remote and travel often. You want to provide the greatest visibility into their activities, even while traveling. Using Netskope. which deployment method would be used in this scenario?
- A. Use a GRE tunnel.
- B. Use proxy chaining.
- C. Use an IPsec tunnel.
- D. Use a Netskope client.
正解：D
解説：
The best deployment method for remote and traveling users is to use a Netskope client. The Netskope client is a lightweight software agent that runs on the user's device and steers web and cloud traffic to the Netskope cloud for real-time inspection and policy enforcement1. The Netskope client provides an always-on end user remote access experience and avoids backhauling (or hairpinning) remote users through the corporate network to access applications in public cloud environments2. The Netskope client also supports offline mode, which allows users to work offline and sync their policies when they reconnect to the internet
質問 # 35
Review the exhibit.
add log-upload syslogng parserconfig set log-upload syslogng parserconfig 0 logsource <log-source> You are asked to deploy a virtual appliance OPLP to accept syslog messages directly from the enterprise Palo Alto Networks firewall. You believe that you have configured the OPLP to accept the firewall logs, yet they are not appearing in Risk Insights. Referring to the exhibit, which parser name would be required to complete the new configuration?
- A. panw-syslog
- B. sfwder
- C. custom-csv
- D. squid
正解：A
解説：
The correct parser name to process syslog messages from Palo Alto Networks firewalls is "panw-syslog." Using the appropriate parser ensures that the logs are correctly interpreted and ingested by Netskope, making them available in Risk Insights.
質問 # 36
......
100%合格保証付きの素晴らしいNSK200試験問題PDF：https://jp.fast2test.com/NSK200-premium-file.html