[2025年03月]更新のC1000-058試験問題集、無料サンプル365日更新
まもなく無料セール終了！リアルC1000-058のPDF解答使おう
質問 # 75
Which type of channel in IBM MQ is used for bidirectional communication with client applications?
- A. Requester Channel
- B. Client Channel
- C. Server-Connection Channel
- D. Sender-Receiver Channel
正解：B
質問 # 76
A failed MQ on z/OS request is received with a reason code 'MQRC_STORAGE_MEDIUM_FULL'. What are two reasons for this type of failure?
(Select two.)
Response:
- A. The coupling facility is full
- B. Cannot write to the disk
- C. There is not enough space remaining on the page set
- D. Buffer pool has reached the limit
- E. Application are offline
正解：B、C
質問 # 77
Which term refers to the practice of safeguarding information by converting it into an unreadable format unless decrypted?
- A. Encryption
- B. Redaction
- C. Compression
- D. Obfuscation
正解：A
質問 # 78
What does the term "Alert" refer to in the context of system monitoring?
- A. Complete system backup
- B. Snapshot of system configurations
- C. Notification of potential issues or failures
- D. Detailed log of system events
正解：C
質問 # 79
What queue does the Application Activity Trace write to?
- A. SYSTEM.ADMIN.ACTIVITY.QUEUE
- B. SYSTEM.DEFAULT.TRACE.ACTIVITY.QUEUE
- C. SYSTEM.DEFAULT.TRACE.QUEUE
- D. SYSTEM.ADMIN.TRACE.ACTIVITY.QUEUE
正解：D
質問 # 80
Which term describes the process of validating a user's identity?
- A. Firewalling
- B. Authentication
- C. Encryption
- D. Authorization
正解：B
質問 # 81
If during normal operation the IBM MQ Appliance detects an intrusion, what will happen the next time the appliance restarts?
- A. The appliance will flash the Locate LED
- B. The appliance will enter Disaster Recovery mode
- C. The appliance will repeatedly shut down
- D. The appliance will enter Fail Safe mode
正解：D
質問 # 82
It is suspected that a poor programming technique has been used in coding an application that uses an MQ queue (Q1). The application puts a high volume of small messages to the queue. It has been observed that when the application is running, server CPU resource usage increases sharply.
Which command(s) will provide the administrator with the data needed to confirm or reject the poor programming technique?
- A. ALTER QMGR STATCHL(ON) STATQ(NONE)ALTER QLOCAL(Q1) STATQ(QMGR)
- B. ALTER QMGR STATMQI(ON)
- C. ALTER QLOCAL(Q1) ACCTQ(QMGR)ALTER QMGR ACCTINT(10) ACCTQ(NONE)
- D. ALTER QLOCAL(Q1) STATMQI(ON)
正解：C
質問 # 83
The MQ administrator must meet a regulatory compliance requirement to preserve confidentiality of data in messages at rest, in traces, and in FFST files.
Which MQ security control meets this requirement?
- A. A non-blank value in the channel's SSLCIPH attribute.
- B. Advanced Message Security with a non-blank ENCALG specified in the policy records.
- C. Set Password Protection to ALWAYS in the qm.ini file.
- D. Use an API or API Crossing exit that encrypts the messages.
正解：A
質問 # 84
An application is putting messages in an MQ cluster but the messages are only routed to the local queue manager to which the application is connected.
What parameter should the administrator adjust to achieve a desired round-robin delivery f messages throughout the cluster?
Response:
- A. CLWLUSEQ should be set to ANY
- B. CLWLUSEQ should be set to SHARE
- C. MSGDLVSQ should be set to SHARE
- D. MSGDLVSQ should be set to ANY
正解：A
質問 # 85
When configuring MQ shared queues on z/OS, where are the queue objects that represents the attributes of the shared queues held?
- A. VSAM database
- B. External SQL Server
- C. Shared DB2 repository
- D. Shared Oracle database
正解：C
質問 # 86
What is the primary objective of performance tuning in an IT system?
- A. Maximizing system uptime
- B. Optimizing system responsiveness and efficiency
- C. Minimizing data storage
- D. Reducing system costs
正解：B
質問 # 87
What should an administrator do to detect when an application attempts to open a channel, but the attempt fails because SSL does not allow the connection?
- A. Adjust the DISCINT parameter for the channel.
- B. Apply a fixpack to prohibit unauthorized channel access.
- C. Update the channels stanza in qm.ini with SSL=AUDIT.
- D. Check instrumentation event messages.
正解：D
質問 # 88
What is the purpose of the AMQERR01.LOG file in IBM MQ?
- A. Manages queue depth information
- B. Archives completed message transactions
- C. Records incoming message acknowledgments
- D. Stores error and problem records
正解：D
質問 # 89
In terms of installation, what does "Rack and Stack" mean in a data center context?
- A. Configuring network switches
- B. Arranging server hardware within a rack for installation
- C. Arranging network cables in a data center
- D. Installing software updates on servers
正解：B
質問 # 90
In application triggering what is the role of trigger monitor process?
Response:
- A. It monitors the application queue and when the trigger conditions are met and issues a command to start an application.
- B. It monitors the initiation queue and based on trigger message issues a command to start an application.
- C. It monitors the transmission queue and based on trigger message issues a command to start an application.
- D. It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.
正解：B
質問 # 91
Which two statements are true if a CHLAUTH rule has been configured as TYPE(SSLPEERMAP)?
(Select two.)
Response:
- A. SSLPEERMAP must be accompanied by an SSLPEER.
- B. SSLPEERMAP record can map the TLS distinguished name of the issuer certificate.
- C. SSLPEERMAP must allow all peers to connect.
- D. SSLCERTI is the TLS distinguished name of the matched certificate.
正解：A、B
質問 # 92
An application is putting messages in an MQ cluster but the messages are only routed to the local queue manager to which the application is connected.
What parameter should the administrator adjust to achieve a desired round-robin delivery f messages throughout the cluster?
- A. CLWLUSEQ should be set to ANY
- B. CLWLUSEQ should be set to SHARE
- C. MSGDLVSQ should be set to SHARE
- D. MSGDLVSQ should be set to ANY
正解：A
質問 # 93
What is the role of patch management in system administration?
- A. Implementing changes to improve software security and functionality
- B. Handling physical server maintenance
- C. Configuring user access permissions
- D. Managing network traffic and bandwidth
正解：A
質問 # 94
How is a multi-instance queue manager created?
- A. Create a queue manager on both servers ensuring it is the same name on both
- B. Create a queue manager and run the command dspmqinf on the first server then run the command addmqinf on the second server.
- C. Create a queue manager on both servers, including the server details of the other server in the QMGR settings.
- D. Create a queue manager on the first server, run the command dmpmqcfg on the first server and import the configuration into the second server using the command addmqcfg
正解：B
質問 # 95
Which task is typically associated with network administration?
- A. Creating database queries
- B. Designing user interfaces
- C. Configuring routers and switches
- D. Writing programming code
正解：C
質問 # 96
Which type of testing evaluates a system's ability to recover from catastrophic failures?
- A. Failover Testing
- B. Redundancy Testing
- C. Stress Testing
- D. Recovery Testing
正解：D
質問 # 97
Which statement is true regarding trace-route messaging?
- A. It cannot be used for a clustered queue manager
- B. It collects MQI activity information
- C. It is a technique that involves sending an IBM MQ trace-route message into a queue manager network
- D. It detects the latency of messages going through a queue manager
正解：A
質問 # 98
......
C1000-058問題集あなたを合格させる認証試験：https://jp.fast2test.com/C1000-058-premium-file.html