[2025年02月]更新のFortinet FCP_FWF_AD-7.4試験基本問題には解答が付きます
2025年最新の実際に出るFortinet FCP_FWF_AD-7.4試験問題集と解答
質問 # 11
Which of the following options are considered wireless security measures?
Response:
- A. Rogue AP scanning
- B. WPA3 encryption
- C. SSID hiding
- D. Firmware updating
正解：A、B、C
質問 # 12
VLAN load-balancing features are designed to:
Response:
- A. Enhance wireless signal strength.
- B. Secure wireless traffic using encryption.
- C. Create guest accounts for the network.
- D. Distribute traffic across multiple VLANs efficiently.
正解：D
質問 # 13
How can you find upstream and downstream link rates of a wireless client using FortiGate?
Response:
- A. On the FortiAP CLI, using the cw_diag -d sta command
- B. On the FortiGate GUI, using the WiFi Client monitor
- C. On the FortiAP CLI, using the cw_diag ksta command
- D. On the FortiGate CLI, using the diag wireless-controller wlac -d Sta command
正解：B
質問 # 14
What steps can be taken to troubleshoot common wireless connectivity issues?
(Select all that apply)
Response:
- A. Review AP-to-controller connection status
- B. Verify VLAN assignments
- C. Increase AP transmit power
- D. Check DHCP server operation
正解：A、B、D
質問 # 15
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server?
(Choose three.)
Response:
- A. 58 Egress-VLAN-Name
- B. 64 Tunnel-Type
- C. 81 Tunnel-Private-Group-ID
- D. 65 Tunnel-Medium-Type
- E. 83 Tunnel-Preference
正解：B、C、D
質問 # 16
The primary benefit of configuring advanced bridge mode options in a FortiAP device is to:
Response:
- A. Assign VLAN tags to SSIDs.
- B. Control traffic flow between the wired and wireless segments.
- C. Create guest accounts for the network.
- D. Distribute clients evenly across multiple FortiAP devices.
正解：B
質問 # 17
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices. Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs. To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance? Response:
- A. Install another AP in the reception area to improve available bandwidth
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Increase the transmission power of the AP radios
- D. Enable frequency handoff on the AP to band steer clients
正解：D
質問 # 18
What could be a probable cause when a client device struggles to maintain a consistent connection to the AP?
Response:
- A. Too few client devices connected
- B. Poor signal strength or RF interference
- C. DHCP scope being too large
- D. AP broadcasting multiple SSIDs
正解：B
質問 # 19
What factors should be considered when troubleshooting FortiGuard issues?
(Select all that apply)
Response:
- A. DNS resolution for FortiGuard servers
- B. Time synchronization between FortiGate and NTP servers
- C. Active FortiGuard subscription status
- D. Firewall rules that may block FortiGuard updates
正解：A、C、D
質問 # 20
Which tools can assist in troubleshooting wireless network issues on FortiGate?
(Select all that apply)
Response:
- A. DHCP lease tracker
- B. Packet capture analyzer
- C. RF spectrum analyzer
- D. Encryption key generator
正解：B、C
質問 # 21
In an environment where multiple SSIDs are broadcasted, how can you segregate network traffic for better management?
Response:
- A. Configure FortiAP profiles.
- B. Provision guest accounts on each SSI
- C. Use VLANs on SSIDs.
- D. Deploy advanced wireless settings.
正解：C
質問 # 22
When developing the high-level scope phase in wireless design projects, which statement best describes the scope?
Response:
- A. It uses the why, when, what and how questions to determine the goal of the project at a high level.
- B. It simplifies wireless design projects only for high-end devices that might require wireless connectivity.
- C. It covers the main topics to analysis existing wireless networks, and issues reports about general performance.
- D. It determines the top-tier groups that will be responsible for designing the wireless network.
正解：A
質問 # 23
What are the benefits of using SSID hiding in a wireless network?
(Select all that apply)
Response:
- A. Preventing casual scanning of the network
- B. Reducing the visibility of the network to unauthorized users
- C. Enhancing wireless signal strength
- D. Allowing automatic connection for authorized devices
正解：A、B
質問 # 24
Which wireless security measures can be configured on FortiGate to protect against unauthorized access?
(Select all that apply)
Response:
- A. Load balancing
- B. Rogue AP scanning
- C. WPA3 encryption
- D. SSID hiding
正解：B、C、D
質問 # 25
What is the primary function of FortiPlanner?
Response:
- A. FortiGate device configuration
- B. Management of FortiAP devices
- C. Predictive modeling for wireless network planning
- D. Wireless network threat analysis
正解：C
質問 # 26
Employees at the remote office reported speed issues with the wireless network. Dual-band FortiAP devices have been correctly deployed throughout the office to ensure coverage and optimal performance. However, employees have noticed that the wireless stations consistently connect to the 2.4 GHz network but not the 5 GHz network.
What must IT administrators perform to troubleshoot the issue?
Response:
- A. Review if FortiAP resources are not experiencing high CPU or memory usage.
- B. Disable the 2.4 GHz radio to force the wireless stations to connect.
- C. Verify that the allocated frequency channel on FortiAP is not exhausted.
- D. Confirm whether internet speed limits are preventing access to high speed by wireless stations.
正解：C
質問 # 27
How can poor roaming capabilities between APs affect wireless clients in an office environment?
Response:
- A. Frequent disconnections
- B. Enhanced wireless signal strength
- C. Improved connection stability
- D. Increased throughput
正解：A
質問 # 28
What is the primary function of FortiPlanner in wireless network planning?
Response:
- A. Real-time monitoring of wireless traffic
- B. Managing FortiAP devices
- C. Predictive modeling for wireless network coverage
- D. Configuring wireless security policies
正解：C
質問 # 29
Which of the following tools cannot act as a standalone wireless controller?
Response:
- A. FortiPresence
- B. FortiPlanner
- C. FortiAP Cloud
- D. FortiGate
正解：B
質問 # 30
A tunnel mode wireless network is configured on a FortiGate wireless controller. Which task must be completed before the wireless network can be used?
Response:
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The new network must be manually assigned to a FortiAP profile.
- C. The wireless network interface must be assigned a Layer 3 address
- D. The wireless network to Internet firewall policy must be configured
正解：D
質問 # 31
For protecting against wireless network intrusions, you would configure:
Response:
- A. WIDS profiles.
- B. Wi-Fi signal boosters.
- C. DHCP options.
- D. Bandwidth management profiles.
正解：A
質問 # 32
Which actions can be taken to provision and manage FortiAP devices using the FortiGate wireless controller?
(Select all that apply)
Response:
- A. Configure advanced wireless settings
- B. Implement VLAN load-balancing
- C. Enable SSID hiding
- D. Create and apply FortiAP profiles
正解：A、B、D
質問 # 33
What are the benefits of using FortiPresence analytics in a wireless network?
(Select all that apply)
Response:
- A. Monitoring and suppressing rogue APs
- B. Providing real-time data for decision-making
- C. Gaining insights into user behavior and footfall patterns
- D. Enhancing wireless signal strength
正解：B、C
質問 # 34
What might cause poor performance in a wireless network?
(Select all that apply)
Response:
- A. RF interference from neighboring devices
- B. Incorrect VLAN assignments
- C. High client density on a single AP
- D. Overlapping SSID broadcasts
正解：A、C
質問 # 35
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
Response:
- A. Install supported FortiAP and configure a bridge mode wireless network
- B. Configure a tunnel mode wireless network and enable split tunneling to the local network
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Configure a bridge mode wireless network and enable the Local standalone configuration option
正解：B
質問 # 36
......
合格保証付きのFortinet Network Security Expert FCP_FWF_AD-7.4試験問題集：https://jp.fast2test.com/FCP_FWF_AD-7.4-premium-file.html
FCP_FWF_AD-7.4練習テストエンジンで今すぐ使おう141試験問題：https://drive.google.com/open?id=1V1gZerxQ-Xng0dTGpsLaDhtWHXp5fm9b