[2025年最新] 完璧HPE0-J68問題集問題と解答で一年無料最速更新
更新されたのは2025年リアルな無敵HPE0-J68問題集で100% 無料HPE0-J68試験問題集
質問 # 77
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Federated storage
- B. Multi-tenancy
- C. Scale out storage
- D. Autonomic Management
正解：B
質問 # 78
Which value does an HPE Nimble solution provide in addition to other HPE storage solutions
- A. Tier 1 and tier 2 phone support
- B. All inclusive software licensing over 5 years and additional capacity upgrades
- C. Upfront option for free controller upgrade after 3 years
- D. Flat support pricing for all hardware components
正解：A
質問 # 79
A second group of 11 same-capacity disks has been added to your customer's HPE Alletra 6000 head shelf.
After 1 hour it seems the new drives have not merged with the existing driveset. Which action should you perform to fix the problem?
- A. Log in to the Alletra 6000 local UI, then from the Hardware section of the UI next to the head shelf icon click "Admit."
- B. The merging process may take up to 24h, wait and then verify the next day.
- C. If you add a second driveset, it will always be configured as a separate RAID set.
- D. Log in to the Alletra 6000 CLI via SSH, then run the "tunesys" command to trigger the RAID rebalancing process.
正解：D
質問 # 80
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. Port isolation
- B. IVR
- C. VSAN
- D. Zoning
正解：A
質問 # 81
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?
- A. Storage Sizing Tool
- B. One Config Advanced
- C. NinjaSTARS
- D. SAF Collect
正解：B
質問 # 82
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?
- A. 3PAR Host Explorer
- B. OneView Global Dashboard
- C. HPE SAN Network Advisor Professional
- D. HPE SAN Network Advisor Enterprise
正解：D
質問 # 83
Which storage tool in the storage assessment foundry provide data protection analysis?
- A. Ninja protected+ (318)
- B. NinjaCrawler
- C. Ninja Thin
- D. Ninja Stars
正解：A
質問 # 84
Which HPE Alletra 9000 management option allows you to set up performance alerts?
- A. Data Services Cloud Console Block Storage
- B. Data Services Cloud Console Data Ops Manager
- C. CLI
- D. Local UI
正解：B
質問 # 85
Select a correct statement regarding the expandability of the HPE Alletra 9080 with 4 controllers and maximum capacity requirements.
- A. Eight drive enclosures increase capacity efficiency with 82 RAID 6 set.
- B. Additional drive enclosure increases the performance of the solution.
- C. Sixteen drive enclosures increase capacity efficiency with 82 RAID 6 set.
- D. HPE Alletra 9000 supports drive enclosure daisy chaining
正解：D
質問 # 86
When performing an OS update on an HPE Alletra 6000, which of the following options should you perform if the process fails?
- A. Power down, then swap controllers and power up to trigger reimaging
- B. Use the included USB drive and boot from the recovery image
- C. Wait for the rollback to the previous version to complete and then troubleshoot
- D. Connect to console via serial cable and run the "factoryimage" command
正解：C
質問 # 87
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. Target drive type must match source drive type
- B. Required license must be provided
- C. RMC 6.2
- D. 2-port 10 Gb Ethernet Adapter (NIC) is required in each array
- E. Check that the 3PAR OS version is supported
- F. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
正解：B、F
質問 # 88
What information should be collected for creating a proper host entry within Data Ops Manager when using an HPE Alletta MP solution?
- A. Data protection policy
- B. HBA vendor
- C. Port World Wide Name
- D. LUN ID
正解：C
解説：
When creating a proper host entry within Data Ops Manager while using an HPE Alletra MP solution, it is crucial to collect the Port World Wide Name (WWN). The WWN is a unique identifier for each port on a host's HBA (Host Bus Adapter) and is essential for configuring storage connectivity, zoning, and mapping between the storage system and the host. Accurate WWN information ensures correct and secure access to the storage resources.
Reference:
HPE Alletra MP Data Ops Manager
HPE Storage Connectivity
質問 # 89
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?
- A. WEBEM
- B. Rest API
- C. WMI
- D. SMI-S
正解：B
解説：
The REST API (Representational State Transfer Application Programming Interface) uses four basic commands: Create, Read, Update, and Delete (often abbreviated as CRUD). These commands enable administrators to define and simplify management processes in a programmatic way. REST APIs are widely used in modern IT environments for their simplicity and efficiency in managing and interacting with systems, including storage and networking solutions.
Reference:
HPE REST API Documentation
Introduction to REST API
質問 # 90
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?
- A. HPE Nimble CS1000 system
- B. HPE MSA 2052 Storage
- C. HPE SimpliVity 380
- D. HPE 3PAR StoreServ 8200
正解：A
解説：
The HPE Nimble CS1000 system is a suitable solution for remote offices that require All-Flash storage with simplified management. Nimble Storage offers predictive analytics with HPE InfoSight, providing ease of management and performance optimization. Additionally, the system supports application-aware replication, which is critical for disaster recovery scenarios by replicating data to a central site, ensuring data integrity and availability.
This solution addresses the need for All-Flash performance, ease of management, and robust replication features in remote office environments.
For more information, refer to:
* HPE Nimble Storage
質問 # 91
What HPE Alletra 9000 CLI command allows you to display teal-time statistics on exported volumes including roundtrip time of an 10 as seen by the system?
- A. statvv
- B. statvlun
- C. srstatvlun
- D. srstatvv
正解：B
解説：
The statvlun command in the HPE Alletra 9000 CLI is used to display real-time statistics on exported volumes, including the roundtrip time (RTT) of an I/O as seen by the system. This command provides detailed insights into the performance of the volumes, helping administrators monitor and optimize the storage system's performance in real-time.
References:
* HPE Alletra 9000 CLI Commands
* HPE Storage Performance Monitoring
質問 # 92
In discussion with a customer, you are asked about a solution that would support 100G iSCSI connectivity. To which product is this topic related to?
- A. AlletraMP16-core
- B. Alletra 6030
- C. MSA 2062
- D. Alletra9060
正解：D
解説：
The topic of supporting 100G iSCSI connectivity is related to the HPE Alletra 9060. This model in the Alletra series supports high-performance networking options, including 100G iSCSI, which is ideal for environments that require extremely fast data transfer rates and low latency, such as in data-intensive applications or large- scale virtualization deployments.
For more information, refer to:
* HPE Alletra 9000 Overview
質問 # 93
Refer to the exhibit.
You are configuring a new HPE array and verifying properties of a set of volumes.
Which RAID level is used on the VMwareDatastores-GF volume?
- A. RAID 6
- B. RAID 5
- C. Triple Parity+
- D. RAID 0
正解：B
解説：
The exhibit refers to a configuration scenario where properties of a volume set, specifically VMwareDatastores-GF, are being verified. The question focuses on identifying the RAID level used on this volume.
RAID 5 is a common configuration in many storage arrays because it provides a balance of performance, capacity, and data protection. In RAID 5, data is striped across multiple disks with parity information distributed among the disks. This parity allows for the recovery of data in the event of a single disk failure, making it a preferred choice for environments that require efficient storage utilization with a degree of fault tolerance.
HPE storage solutions, such as HPE Nimble Storage and HPE 3PAR, often employ RAID 5 for use cases involving virtualized environments like VMware datastores. These solutions are optimized for high performance and data protection, ensuring that even with a single drive failure, the data remains accessible and the system can continue to operate without significant performance degradation.
Reference:
HPE Storage Products
HPE Flash and Hybrid Storage
HPE Nimble Storage
These resources provide comprehensive information on HPE's RAID configurations, data protection mechanisms, and how they integrate with enterprise storage environments.
質問 # 94
Select the correct statement regarding the interoperability of different drive interfaces.
- A. NVMe drives can be connected to SATA backplane
- B. NVMe only supports 15K enterprise-class disks
- C. SATA drives can be connected to the SAS backplane
- D. SAS drives can be connected to SATA backplane
正解：C
質問 # 95
A large enterprise is experiencing exponential data growth of their existing Oracle databases.
They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System.
Which HPE storage solution allow the customer to migrate this risk?
- A. StoreOnce unified deduplication
- B. 3 PAR remote copy
- C. Catalyst in-Flight compression
- D. RMC Express protect
正解：D
質問 # 96
What is the purpose of WWN in FC SAN? (Choose two.)
- A. Identification of zone members
- B. Identification of entities via Storage Name Server (SNS)
- C. Identification of entities denied access to a volume
- D. Forward translation of DNS entries
- E. Load balanced frame delivery
正解：A、B
解説：
In a Fibre Channel (FC) SAN, the World Wide Name (WWN) serves as a unique identifier for devices within the network. The WWN is used in several critical functions:
Identification of zone members (Option A): WWNs are used to define and manage zones within a SAN. Zoning is a method of grouping devices, such as servers and storage arrays, to control access and ensure data security. By identifying zone members via their WWNs, administrators can control which devices can communicate within the SAN.
Identification of entities via Storage Name Server (SNS) (Option C): The WWN is registered with the Storage Name Server (SNS) in the SAN fabric. The SNS maintains a database of all devices within the SAN and their associated WWNs, enabling efficient routing of data frames to the correct destination.
These features make the WWN a fundamental element in the operation and management of a Fibre Channel SAN.
Reference:
HPE SAN and Zoning Overview
HPE Fibre Channel Networking Solutions
質問 # 97
Match the HPE converged Strategy principle with its function
- A. Deduplication:-Reduce allocated capacity by eliminating data redundancy
- B. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
- C. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively
- D. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
- E. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.
正解：E
質問 # 98
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Core-edge fabric
- B. Cascaded fabric
- C. Meshed fabric
- D. Single switch fabric
正解：C
解説：
A Meshed fabric SAN topology is recommended when the customer requires a high-performance, port- efficient network with many-to-many connectivity and cannot predict I/O traffic patterns. This topology provides multiple paths between devices, ensuring high availability and redundancy. It is flexible and can easily accommodate changes in the network, such as the acquisition of another company, making it ideal for environments with dynamic requirements.
References:
* HPE SAN Fabric Design
* SAN Fabric Planning Guide
質問 # 99
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?
- A. WEBEM
- B. Rest API
- C. WMI
- D. SMI-S
正解：B
質問 # 100
......
HP HPE0-J68認定試験は、ストレージソリューションに関心のあるIT専門家の知識とスキルをテストするように設計されています。この試験は、HPEストレージソリューションの設計、インストール、構成、管理の経験がある個人を対象としています。 HPE0-J68試験は、複数選択の質問で構成されており、提案された環境で実施されます。試験に合格することは、HPEストレージソリューション認証を取得するための要件です。これは、ストレージソリューションの分野での卓越性のマークとしてグローバルに認識されています。
HPE0-J68問題集PDFとテストエンジン試験問題：https://jp.fast2test.com/HPE0-J68-premium-file.html
Get2025年最新の無料更新されたHP HPE0-J68試験問題と解答：https://drive.google.com/open?id=1zKejY62HL_X6e0YpHRR1xu1sE6XlF11Q