[2024年12月]更新のH12-831_V1.0-ENU試験問題集合格させるのは2024年最新のHCIP-Datacom-Advanced Routing & Switching Technology V1.0 [Q152-Q175]

[2024年12月]更新のH12-831_V1.0-ENU試験問題集合格させるのは2024年最新のHCIP-Datacom-Advanced Routing & Switching Technology V1.0

無料で使えるH12-831_V1.0-ENU試験問題集で合格させるお手軽に試験合格

Huawei H12-831_V1.0試験は、データ通信とネットワークに関連する広範なトピックをカバーしており、高度なルーティングおよびスイッチング技術、ネットワークセキュリティ、仮想化、クラウドコンピューティングを含みます。この試験は、ITプロフェッショナルがこれらの分野での知識とスキルをテストし、複雑なデータ通信とネットワークシステムを設計、実装、および管理するために必要な専門知識を持っていることを確認するために設計されています。

試験は多肢選択問題から構成され、候補者が実世界のシナリオにその知識を適用する能力を示すことを要求します。試験は、候補者が高速かつダイナミックな環境で問題を解決し、決定する能力をテストするように設計されています。試験には、複雑なネットワークシナリオを構成およびトラブルシューティングする必要があるシミュレーションも含まれます。

質問 # 152
In OSPFv3, the LSA whose propagation range is an area has () types. (Fill in Arabic teaching characters only)

正解：

解説：
129

質問 # 153
Regarding the label space of MPLS, the description is wrong:

A. 16~1023is staticLSPand staticCR-LSPshared tab space
B. 1024Above areLDP,RSVP-TE. MP-BGPLabel space shared by other dynamic signaling protocols
C. penultimate jumpLSRWhen performing label exchange, if the exchanged label value is found to be3,By default, the label is popped and the message is sent to the last hop
D. If the out tag value is0,The router will directly discard the packet

正解：D

質問 # 154
According to this picture, what can we judge? (Multiple choice)

A. R1 has routes of 3002.-3/128 and 3002:.4/128
B. If the routing policy on AS_Pash is not configured, then 3002:4/28 must originate from AS 65001
C. R1 does not have routes of 3002:.3/128 and 3002.-4/128
D. If the routing policy on AS_Path is not configured, then 3002:-4/128 must not originate from AS 65001

正解：A、B

質問 # 155
The following six tools cannot be used to match BGP routing entries?

A. advancedA, CL
B. Community Filter
C. IP Prefix List
D. basicA, CL

正解：A

質問 # 156
Which of the following information can the DHCP binding table contain? (Multiple choice)

A. MAC address
B. Port and UDP port
C. Lease time
D. IP address

正解：A、C、D

質問 # 157
As shown in the figure, OSPF is enabled on all interfaces of the router, and the ip address identified in the figure is the device's IP address.
Loopback0 presses the IP address of the port, RI, R2, R3EJLoopbacD is advertised in the area 1, R4 LoopbacfkD advertises in area D and which of the following functional addresses can be pinged between the LoopbackD announcements of R5 and R5 in area 2?

Areal
10.0.1.1/32

A. 10.0.2.2and10.0.3.3
B. 10.0.4.4and10.0.2.2
C. 10.0.3.3 10.0.5.5
D. 10.0.2.2 10.0.5.5

正解：A

質問 # 158
In the network shown in the figure below, if you want to implement a remote LDP session between SWA and SWC, which statement is correct?

A. No need to specify the lsr-id of the correct equivalent
B. The configuration in the figure can be achieved
C. Need to be equipped with a straight connection port to establish a TCP connection
D. Need to create a remote peer, and then specify the lsr-id of the peer

正解：D

質問 # 159
You have set IS-IS IPv6 enable under the interface, what is the meaning of this command?

A. Activate on the interfaceIPv6 IS-ISprocess1
B. activate on the interfaceIPv6 IS-ISprocess10
C. Activate on the interfaceIPv6 IS-ISprocess3
D. activate on the interfaceIPv6 IS-ISprocess2

正解：A

質問 # 160
If display current-configuration can reach the setting of !JIS-IS, and display saved- There is no IS-IS setting in the configuration, so that means?

A. memory is runningIS-ISconfiguration, not saved toFlash
B. memory is runningIS-ISConfiguration saved toFlash
C. FlashRunningIS-ISconfiguration, not saved to memory
D. nothing enteredIS-ISThe command

正解：A

質問 # 161
Which statement about DHCP Snooping is wrong?

A. Global enableDHCP Snoopingfunction, without any post-parameters, the device only processes by default DHCPv4message
B. DHCP SnoopingYou can prevent illegal attacks by setting trusted ports (all interfaces are untrusted by default.
mouth)
C. Enable in interface viewDHCP Snoopingfunction, then all theDHCPThe message command function takes effect
D. existVLANEnable in viewDHCP Snoopingfunction, then all interfaces of the device receive data belonging to thisVLANofDHCPThe message command function takes effect

正解：B

質問 # 162
By default, the Domain ID of each OSPF process running on the router is the same as the process number of the process, which can be modified by the domain-id command under the process

A. TRUE
B. FALSE

正解：B

質問 # 163
A campus deploys OSPF to implement network interworking. The LSDB of R2 is shown in the figure. From this LSDB. it is possible to What information was obtained?

A. Area 1forNSSAarea
B. ArealNone inType3 LSA. maybeR2in the area1In the correct directiontype3 LSAfiltered
C. R2existOSPFThe default route is delivered in the process
D. R2WillType7 LSAThe default route is converted toType5 LSAdefault route for

正解：A、C

質問 # 164
Basic QinQ can choose the outer tag encapsulation method according to the business type.

A. False
B. True

正解：A

質問 # 165
An engineer uses two routers to test IPv6 services, and simulates the interconnection between the headquarters and branches by running BGP4+. As shown in the figure, an engineer captures the packet to view the update message sent by R1.

Regarding the description of the message information, which of the following statements is correct?

A. The message describes the currently revoked IPv6 route
B. The route described in the message may be imported through import
C. The next-hop address of the route described in this message is: 2001:db8::2345:1.:1
D. The routing address prefix and its prefix length described in this message are: 2001:db8:2345:1::1/128/

正解：D

質問 # 166
What is the meaning of display current-configuration I include vlan command?

A. View eachVLANphysical interface information bound to the
B. CheckVLANIFinterfaceIPaddress
C. See what's currently createdVLAN
D. View all included"VLAN"Configuration of keywords

正解：D

質問 # 167
(Drag and drop) Please match the following DHCP attack types with corresponding explanations.

正解：

解説：

質問 # 168
What is the most efficient way to view device alarms through the CLI?

A. display alarm
B. display interface brief
C. display clock
D. display current-configuration

正解：A

質問 # 169
The Router ID of OSPFv3 needs to be configured in dotted decimal notation with a length of 128bits.

A. TRUE
B. FALSE

正解：B

質問 # 170
What check items can be set in IPSG? (Multiple choice)

A. MAC address
B. VLANID
C. Outgoing interface
D. IP address

正解：A、B、C、D

質問 # 171
Please pair the following DHCP attack types with corresponding explanations.

A. DHCPstarvation attack-3 DHCPPhishing attack man-in-the-middle attack-2 DHCPPacket flood attack-4
B. DHCPstarvation attack-2 DHCPPhishing attack-3man-in-the-middle attack-1 DHCPPacket flood attack-4
C. DHCPstarvation attack-1 DHCPPhishing attack-3man-in-the-middle attack-2 DHCPPacket flood attack-4
D. DHCPstarvation attack-4 DHCPPhishing attack-3man-in-the-middle attack-2 DHCPPacket flood attack-1

正解：C

質問 # 172
As shown in the figure, OSPF is enabled on all the routers. The IP address marked in the figure is the IP address of the loopbackO interface of the device. The LoopbackO of R1 and R2 is advertised in area 1, the LoopbackO of R4 is advertised in area 0, and the LoopbackO of R3 and R5E is advertised in area 0. In area 2, which of the following IP addresses can ping each other?

A. 10.022and10.0.5.5 (Non-backbone area received3class received does not count)
B. 10.0.4.4and10.022 (normal calculation3kind)
C. 10.0.3.3and10.0.5.5 (same area1kind)
D. 10.0.2.2and10.0.3.3 (Non-backbone area received3class received does not count)

正解：B、C

質問 # 173
As shown in the figure, all interfaces of the router enable OSPF. Which of the following statements is correct?

A. The Type1 LSA generated by R2 in area 0 contains 10.0.2.2/32 routing information
B. The Type2 LSA generated by R2 in area 0 contains 10.0.2.2/24 routing information
C. The Type3 LSA generated by R2 in area 0 contains 10.0.2.2/32 routing information
D. The Type5 LSA generated by R2 in area 0 contains 10.0.2.2/32 routing information

正解：A

質問 # 174
What is the Router-ID of OSPFv3?