[2024年11月]更新のCISSP認定実際の問題を提供します [Q502-Q524]

[2024年11月]更新のCISSP認定実際の問題を提供します

更新されたのはCISSP問題集PDFでCISSPリアル有効なブレーン問題集には1795問があります！

ISC CISSP認定試験を受ける資格を得るには、候補者は情報セキュリティの分野で最低5年間の専門的経験を持たなければなりません。あるいは、4年間の経験と関連分野の大学の学位を持つ候補者も適用できます。この試験は250の複数選択の質問で構成されており、候補者はそれを完了するのに最大6時間です。試験に合格するには、候補者は1000ポイントのうち最低700点を獲得する必要があります。

CISSP認定試験に受験資格を得るためには、情報セキュリティに関する職務経験が最低5年必要です。この要件を満たしていない場合でも、関連する学士号または修士号、または他の適用可能な認定資格を持っている場合は、試験の受験資格がある場合があります。

 

質問 # 502
A post-implementation review has identified that the Voice Over Internet Protocol (VoIP) system was designed to have gratuitous Address Resolution Protocol (ARP) disabled.
Why did the network architect likely design the VoIP system with gratuitous ARP disabled?

• A. Gratuitous ARP requires the likelihood of a successful brute-force attack on the phone.
• B. Gratuitous ARP requires the risk of a Man-in-the-Middle (MITM) attack.
• C. Gratuitous ARP requires the use of insecure layer 3 protocols.
• D. Gratuitous ARP requires the use of Virtual Local Area Network (VLAN) 1.

正解：B

解説：
Gratuitous ARP is a special type of ARP message that a sender device broadcasts on the network without any other device requesting it. It can be useful for updating the ARP table, changing the address of an interface, or informing the network of the sender's own MAC address. However, it also introduces the risk of a Man-in-the-Middle (MITM) attack, where an attacker can send a spoofed gratuitous ARP message to trick other devices into associating a legitimate IP address with a malicious MAC address. This way, the attacker can intercept, modify, or redirect the traffic intended for the legitimate device. Therefore, the network architect likely designed the VoIP system with gratuitous ARP disabled to prevent such attacks and ensure the security and integrity of the voice communication. References: Gratuitous ARP - Definition and Use Cases - Practical Networking .net; Gratuitous_ARP - Wireshark

質問 # 503
Given the various means to protect physical and logical assets, match the access management area to the technology.

正解：

解説：

Explanation

質問 # 504
Which of the following can be defined as the process of rerunning a portion of the test scenario or test plan to ensure that changes or corrections have not introduced new errors?

• A. Unit testing
• B. Pilot testing
• C. Parallel testing
• D. Regression testing

正解：D

解説：
Explanation/Reference:
Explanation:
Regression testing means that after a change to a system takes place, you retest to ensure functionality, performance, and protection.
Incorrect Answers:
A: With Unit testing, you test an individual component in a controlled environment where programmers validate data structure, logic, and boundary conditions.
B: Pilot testing involves having a group of end users try the system prior to its full deployment in order to give feedback on its performance.
D: Parallel Testing is performed when the organization is moving from one system to another. It is the process of performing workflows in the legacy system and the new system to assure that the processes will lead to the same result.
References:
Conrad, Eric, Seth Misenar and Joshua Feldman, CISSP Study Guide, 2nd Edition, Syngress, Waltham,
2012, p. 1105

質問 # 505
What is the name of the FIRST mathematical model of a multi-level security policy used to define the concept of a secure state, the modes of access, and rules for granting access?

• A. Harrison-Ruzzo-Ullman Model
• B. Rivest and Shamir Model
• C. Bell-LaPadula Model
• D. Clark and Wilson Model

正解：C

解説：
Explanation/Reference:
Explanation:
In the 1970s, the U.S. military used time-sharing mainframe systems and was concerned about the security of these systems and leakage of classified information. The Bell-LaPadula model was developed to address these concerns. It was the first mathematical model of a multilevel security policy used to define the concept of a secure state machine and modes of access, and outlined rules of access. Its development was funded by the U.S. government to provide a framework for computer systems that would be used to store and process sensitive information. The model's main goal was to prevent secret information from being accessed in an unauthorized manner.
A system that employs the Bell-LaPadula model is called a multilevel security system because users with different clearances use the system, and the system processes data at different classification levels.
Incorrect Answers:
A: The Clark-Wilson Model is an integrity model. This is not what is described in the question.
B: The HRU security model (Harrison, Ruzzo, Ullman model) is an operating system level computer security model which deals with the integrity of access rights in the system. This is not what is described in the question.
C: Rivest and Shamir is not a model. They created RSA cryptography. This is not what is described in the question.
References:
Harris, Shon, All In One CISSP Exam Guide, 6th Edition, McGraw-Hill, New York, 2013, p. 369

質問 # 506
Which one of the following is a security issue related to aggregation in a database?

• A. Partitioning
• B. Polyinstantiation
• C. Inference
• D. Data swapping

正解：C

解説：
Inference is the ability of users to infer or deduce information about data at sensitivity levels for which they do not have access privileges. -Ronald Krutz The CISSP PREP Guide (gold edition) pg 358 The other security issue is inference, which is very similar to aggregation. - Shon Harris All-in-one CISSP Certification Guide pg 727 Partitioning a database involves dividing the database into different parts, which makes it much harder for an unauthorized individual to find connecting pieces of data that can be brought together and other information that can be deduced or uncovered. - Shon Harris All-in-one CISSP Certification Guide pg 726 Polyinstantiation- This enables a relation to contain multiple tuples with the same primary keys with each instance distinguished by a security level. - Shon Harris All-in-one CISSP Certification Guide pg 727

質問 # 507
Which access control model was proposed for enforcing access control in government and military applications?

• A. Biba model
• B. Sutherland model
• C. Brewer-Nash model
• D. Bell-LaPadula model

正解：D

解説：
Explanation/Reference:
Explanation:
The Bell-LaPadula Model (abbreviated BLP) is a state machine model used for enforcing access control in government and military applications. It was developed by David Elliott Bell and Leonard J. LaPadula, subsequent to strong guidance from Roger R. Schell to formalize the U.S. Department of Defense (DoD) multilevel security (MLS) policy. The model is a formal state transition model of computer security policy that describes a set of access control rules which use security labels on objects and clearances for subjects. Security labels range from the most sensitive (e.g., "Top Secret"), down to the least sensitive (e.g., "Unclassified" or "Public").
Incorrect Answers:
B: The Biba Model describes a set of access control rules designed to ensure data integrity. It is not used for enforcing access control in government and military applications.
C: The Sutherland model is an information flow model. It is not used for enforcing access control in government and military applications.
D: The Brewer and Nash Model deals with conflict of interest. It is not used for enforcing access control in government and military applications.
References:
https://en.wikipedia.org/wiki/Bell-LaPadula_model

質問 # 508
After a breach incident, investigators narrowed the attack to a specific network administrator's credentials.
However, there was no evidence to determine how the hackers obtained the credentials. Much of the following actions could have BEST avoided the above breach per the investigation described above?

• A. A periodic review of network access loos
• B. A periodic review of password strength of all users across the organization
• C. A periodic review of active users en the network
• D. A periodic review of all privileged accounts actions

正解：D

解説：
A periodic review of all privileged accounts actions could have best avoided the breach incident that involved a network administrator's credentials. A privileged account is an account that has elevated permissions or access rights to a system or resource, such as a network administrator, a database administrator, or a root user.
Privileged accounts pose a high risk to the security of an organization, as they can be exploited by malicious insiders or external attackers to compromise the system or resource. A periodic review of all privileged accounts actions is a good practice to monitor and audit the activities and behaviors of the privileged users, and to detect and prevent any unauthorized or suspicious actions. A periodic review of network access logs, active users on the network, and password strength of all users across the organization are also good practices to enhance the security of an organization, but they are not as effective as a periodic review of all privileged accounts actions, as they may not capture the specific actions of the privileged users or the source of the breach. References:
* Privileged Account Management
* Privileged Access Management Best Practices
* Privileged Account Security: A Simple Overview

質問 # 509
As an analog of confidentiality labels, integrity labels in the Biba model are assigned according to which of the following rules?

• A. Integrity labels are assigned according to the harm that would occur from unauthorized disclosure of the information.
• B. Objects are assigned integrity labels according to their trustworthiness; subjects are assigned classes according to the harm that would be done if the data were modified improperly.
• C. Objects are assigned integrity labels identical to the corresponding confidentiality labels.
• D. Subjects are assigned classes according to their trustworthiness; objects are assigned integrity labels according to the harm that would be done if the data were modified improperly.

正解：D

解説：
As subjects in the world of confidentiality are assigned clearances
related to their trustworthiness, subjects in the Biba model are
assigned to integrity classes that are indicative of their trustworthiness.
Also, in the context of confidentiality, objects are
assigned classifications related to the amount of harm that would be
caused by unauthorized disclosure of the object. Similarly, in the
integrity model, objects are assigned to classes related to the amount
of harm that would be caused by the improper modification of the
object. Answer a is incorrect since integrity properties and
confidentiality properties are opposites. For example, in the Bell-
LaPadula model, there is no prohibition against a subject at one
classification reading information from a lower level of
confidentiality. However, when maintenance of the integrity of data
is the objective, reading of information from a lower level of
integrity by a subject at a higher level of integrity risks
contaminating data at the higher level of integrity. Thus, the simple
and * -properties in the Biba model are complements of the
corresponding properties in the Bell-LaPadula model. Recall that the
Simple Integrity Property states that a subject at one level of integrity is not permitted to observe (read) an object of a lower integrity (no read down). Also, the *- Integrity Property states that an object at one level of integrity is not permitted to modify (write to) an object of a higher level of integrity (no write up).
* Answer "Objects are assigned integrity labels according to their trustworthiness; subjects are assigned classes according to the harm that would be done if the data were modified improperly" is incorrect since the words object and subject are interchanged.
* In answer "Integrity labels are assigned according to the harm that would occur from unauthorized disclosure of the information", unauthorized disclosure refers to confidentiality and not to integrity.

質問 # 510
Which of the following algorithms is a stream cipher?

• A. RC4
• B. RC6
• C. RC2
• D. RC5

正解：A

解説：
RC2, RC4, RC5 and RC6 were developed by Ronal Rivest from RSA
Security.
In the RC family only RC4 is a stream cipher.
RC4 allows a variable key length.
RC2 works with 64-bit blocks and variable key lengths,
RC5 has variable block sizes, key length and number of processing rounds.
RC6 was designed to fix a flaw in RC5.
Source: ANDRESS, Mandy, Exam Cram CISSP, Coriolis, 2001, Chapter 6: Cryptography
(page 103).

質問 # 511
Which choice below would NOT be considered a benefit of employing
incident-handling capability?

• A. Security training personnel would have a better understanding of users knowledge of security issues.
• B. An individual acting alone would not be able to subvert a security process or control.
• C. It assists an organization in preventing damage from future incidents.
• D. It enhances internal communications and the readiness of the organization to respond to incidents.

正解：B

解説：
The primary benefits of employing an incident-handling capability are containing and repairing damage from incidents and preventing future damagE. Additional benefits related to establishing an incidenthandling capability are: Enhancement of the risk assessment process. An incidenthandling capability will allow organizations to collect threat data that may be useful in their risk assessment and safeguard selection processes (e.g., in designing new systems). Statistics on the numbers and types of incidents in the organization can be used in the risk-assessment process as an indication of vulnerabilities and threats. Enhancement of internal communications and the readiness of the organization to respond to any type of incident, not just computer security incidents. Internal communications will be improved, management will be better organized to receive communications, and contacts within public affairs, legal staff, law enforcement, and other groups will have been preestablished. Security training personnel will have a better understanding of users knowledge of security issues. Trainers can use actual incidents to vividly illustrate the importance of computer security. Training that is based on current threats and controls recommended by incident-handling staff provides users with
information more specifically directed to their current needs,
thereby reducing the risks to the organization from incidents.
*Answer "An individual acting alone would not be able to subvert a security process or control" is a
benefit of employing separation of duties controls.
Source: National Institute of Standards and Technology, An Introduction
to Computer Security: The NIST Handbook Special Publication 800-12.

質問 # 512
A computer system that employs the necessary hardware and software
assurance measures to enable it to process multiple levels of classified or
sensitive information is called a:

• A. Open system.
• B. Safe system.
• C. Trusted system.
• D. Closed system.

正解：C

解説：
The correct answer is Trusted system, by definition of a trusted system.
Answers Closed system and Open system refer to open, standard information on a product as
opposed to a closed or proprietary product. Answer Safe system is a distracter.

質問 # 513
Business rules can be enforced within a database through the use of

• A. Proxy
• B. Redundancy
• C. Views
• D. Authentication

正解：C

解説：
In database theory, a view consists of a stored query accessible as a virtual table in a relational database or a set of documents in a document-oriented database composed of the result set of a query or map and reduce functions. Unlike ordinary tables
(base tables) in a relational database, a view does not form part of the physical schema: it is a dynamic, virtual table computed or collated from data in the database. Changing the data in a table alters the data shown in subsequent invocations of the view. In some
NoSQL databases views are the only way to query data.
Views can provide advantages over tables:
Views can represent a subset of the data contained in a table
Views can join and simplify multiple tables into a single virtual table
Views can act as aggregated tables, where the database engine aggregates data (sum, average etc.) and presents the calculated results as part of the data
Views can hide the complexity of data; for example a view could appear as Sales2000 or
Sales2001, transparently partitioning the actual underlying table
Views take very little space to store; the database contains only the definition of a view, not a copy of all the data it presents
Depending on the SQL engine used, views can provide extra security
Views can limit the degree of exposure of a table or tables to the outer world
Just as functions (in programming) can provide abstraction, so database users can create abstraction by using views. In another parallel with functions, database users can manipulate nested views, thus one view can aggregate data from other views. Without the use of views the normalization of databases above second normal form would become much more difficult. Views can make it easier to create lossless join decomposition.
The following answers are incorrect:
Proxy
In computer networks, a proxy server is a server (a computer system or an application) that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client. A proxy server may optionally alter the client's request or the server's response, and sometimes it may serve the request without contacting the specified server. In this case, it 'caches' responses from the remote server, and returns subsequent requests for the same content directly.
Redundancy
Redundancy is the duplication of critical components or functions of a system with the intention of increasing reliability of the system, usually in the case of a backup or fail-safe.
There are four major forms of redundancy, these are:
Hardware redundancy, such as Fail-Over, Load Balancer, Stanby mechanisms, DMR, and
TMR
Information redundancy, such as Error detection and correction methods
Time redundancy, including transient fault detection methods such as Alternate Logic
Software redundancy
Redundancy allow you to avoid any single point of failure.
Authentication
The ways in which someone may be authenticated fall into three categories, based on what are known as the factors of authentication: something you know, something you have, or something you are. Each authentication factor covers a range of elements used to authenticate or verify a person's identity prior to being granted access, approving a transaction request, signing a document or other work product, granting authority to others, and establishing a chain of authority.
Security research has determined that for a positive identification, elements from at least two, and preferably all three, factors be verified. The three factors (classes) and some of elements of each factor are:
the knowledge factors: Something the user knows
(e.g., a password, pass phrase, or personal identification number (PIN)) the ownership factors: Something the user has
(e.g., wrist band, ID card, security token, software token)
the inherence factors: Something the user is or does
(e.g., fingerprint, retinal pattern, DNA sequence, signature, face, voice, or other biometric identifier).
TWO FACTORS AUTHENTICATION
When elements representing two factors are required for identification, the term two-factor authentication is applied. . e.g. a bankcard (something the user has) and a PIN (something the user knows). Business networks may require users to provide a password (knowledge factor) and a pseudorandom number from a security token (ownership factor).
The following reference(s) were/was used to create this question:
Official (ISC)2 Guide to the CISSP CBK, Second Edition (2010)
https://en.wikipedia.org/wiki/View_%28database%29
https://en.wikipedia.org/wiki/Redundancy_%28computer_science%29
https://en.wikipedia.org/wiki/Authentication

質問 # 514
What is called the formal acceptance of the adequacy of a system's overall security by the management?

• A. Certification
• B. Evaluation
• C. Acceptance
• D. Accreditation

正解：D

解説：
Explanation/Reference:
Explanation:
Accreditation is the authorization by management to implement software or systems in a production environment. This authorization may be either provisional or full. The following are incorrect answers:
Certification is incorrect. Certification is the process of evaluating the security stance of the software or system against a selected set of standards or policies. Certification is the technical evaluation of a product.
This may precede accreditation but is not a required precursor. Acceptance is incorrect. This term is sometimes used as the recognition that a piece of software or system has met a set of functional or service level criteria (the new payroll system has passed its acceptance test). Certification is the better term in this context. Evaluation is incorrect. Evaluation is certainly a part of the certification process but it is not the best answer to the question.
References: The Official Study Guide to the CBK from ISC2, pages 559-560 AIO3, pp. 314 - 317 AIOv4 Security Architecture and Design (pages 369 - 372) AIOv5 Security Architecture and Design (pages 370 -
372)

質問 # 515
In the modified Waterfall Model:

• A. Product verification and validation are not included.
• B. The model was reinterpreted to have phases begin at project milestones.
• C. Unlimited backward iteration is permitted.
• D. The model was reinterpreted to have phases end at project milestones.

正解：D

解説：
The modified Waterfall model was reinterpreted
to have phases end at project milestones.
Answer "Unlimited backward iteration is permitted" is false
because unlimited backward iteration is not permitted in the modified
Waterfall model.
Answer "The model was reinterpreted to have phases begin at project milestones" is a distracter.
Answer "Product verification and validation are not included" is false because verification and
validation are included.

質問 # 516
Which statement below BEST describes the primary purpose of risk
analysis?

• A. To quantify the impact of potential threats
• B. To influence site selection decisions
• C. To create a clear cost-to-value ratio for implementing security controls
• D. To influence the system design process

正解：A

解説：
The correct answer is "To quantify the impact of potential threats". The main purpose of performing a risk analysis is to put a hard cost or value onto the loss of a business function.
The other answers are benefits of risk management but not its
main purpose.

質問 # 517
Identity and Access Management (IAM) tools support the use of Security Assertion Markup Language (SAML). Which of the following statements is true of SAML?

• A. The SAML standard version 2 is backward compatible with previous versions.
• B. The SAML standard provides Single Sign-On (SSO) authentication.
• C. The SAML assertion contains a packet of user credentials.
• D. The SAML standard relies on Secure File Transfer Protocol (SFTP) as a protocol.

正解：B

質問 # 518
Which of the following is the primary security feature of a proxy server?

• A. URL blocking
• B. Route blocking
• C. Virus Detection
• D. Content filtering

正解：D

解説：
In many organizations, the HTTP proxy is used as a means to implement content filtering, for instance, by logging or blocking traffic that has been defined as, or is assumed to be nonbusiness related for some reason. Although filtering on a proxy server or firewall as part of a layered defense can be quite effective to prevent, for instance, virus infections (though it should never be the only protection against viruses), it will be only moderately effective in preventing access to unauthorized services (such as certain remote-access services or file sharing), as well as preventing the download of unwanted content. HTTP Tunneling. HTTP tunneling is technically a misuse of the protocol on the part of the designer of such tunneling applications. It has become a popular feature with the rise of the first streaming video and audio applications and has been implemented into many applications that have a market need to bypass user policy restrictions. Usually, HTTP tunneling is applied by encapsulating outgoing traffic from an application in an HTTP request and incoming traffic in a response. This is usually not done to circumvent security, but rather, to be compatible with existing firewall rules and allow an application to function through a firewall without the need to apply special rules, or additional configurations.
The following are incorrect choices:
Virus Detection A proxy is not best at detection malware and viruses within content. A antivirus
product would be use for that purpose.
URL blocking This would be a subset of Proxying, based on the content some URL's may be
blocked by the proxy but it is not doing filtering based on URL addresses only. This is not the
BEST answer.
Route blocking This is a function that would be done by Intrusion Detection and Intrusion
prevention system and not the proxy. This could be done by filtering devices such as Firewalls and
Routers as well. Again, not the best choice.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition
((ISC)2 Press) (Kindle Locations 6195-6201). Auerbach Publications. Kindle Edition.

質問 # 519
You have very strict Physical Access controls. At the same time you have loose Logical Access Controls. What is true about this setting?

• A. None of the choices.
• B. It can 100% secure your environment.
• C. It may not secure your environment.
• D. It may secure your environment.

正解：C

解説：
Access control is a bit like the four legs of a chair. Each of the legs must be equal or else an imbalance will be created. If you have very strict Physical Access controls but very poor Logical Access Controls then you may not succeed in securing your environment.

質問 # 520
How is polyinstantiation used to secure a multilevel database?

• A. Two operations at the same layer will conflict if they operate on the same data item and at least one of them is an update.
• B. It prevents low-level database users from inferring the existence of higher level data.
• C. It ensures that all mechanism in a system are responsible for enforcing the database security policy.
• D. It confirms that all constrained data items within the system conform to integrity specifications.

正解：B

解説：
"Polyinstantiation is the development of a detailed version of an object from another object using different values in the new object. In the database information security, this term is concerned with the same primary key for different relations at different classification levels being stored in the same database. For example, in a relational database, the same of a military unit may be classified Secret in the database and may have an identification number as the primary key. If another user at a lower classification level attempts to create a confidential entry for another military unit using the same identification number as a primary key, a rejection of this attempt would imply to the lower level user that the same identification number existed at a higher level of classification. To avoid this inference channel of information, the lower level user would be issued the same identification number for their unit and the database management system would manage this situation where the same primary key was used for different units." Pg 352-353 Krutz: The CISSP Prep Guide: Gold Edition.
"Polyinstantiation occurs when to or more rows in the same table appear to have identical primary key elements but contain different data for use at differing classification levels. Polyinstantiation is often used as a defense against some types of inference attacks.
For example, consider a database table containing the location of various naval ships on patrol.
Normally, this database contains the exact position of each ship stored at the level with secret classification. However, on particular ship, the USS UpToNoGood, is on an undercover mission to a top-secret location. Military commanders do not want anyone to know that the ship deviated from its normal patrol. If the database administrators simply change the classification of the UpToNoGood's location to top secret, a user with secret clearance would know that something unusual was going on when they couldn't query the location of the ship. However, if polyinstantiation is used, two records could be inserted into the table. The first one, classified at the top secret level, would reflect the true location of the ship and be available only to users with the appropriate top secret security clearance. The second record, classified at the secret level, would indicate that the ship was on routine patrol and would be returned to users with a secret clearance."
Pg. 191 Tittel: CISSP Study Guide Second Edition

質問 # 521
Which of the following practices provides the development of security and identification of threats in designing software?

• A. Threat modeling
• B. Stakeholder review
• C. Requirements review
• D. Penetration testing

正解：A

質問 # 522
The data transmission method in which data is sent continuously and
doesn't use either an internal clocking source or start/stop bits for
timing is known as:

• A. Asynchronous
• B. Synchronous
• C. Pleisiochronous
• D. Isochronous

正解：D

解説：
Isochronous data is synchronous data transmitting without a
clocking source, with the bits sent continuously and no start or stop
bits. All bits are of equal importance and are anticipated to occur at
regular time intervals.
* asynchronous, is a data transmission method using a start bit at the beginning of the data value, and a stop bit at the end of the value.
* synchronous, is a messageframed transmission method that uses clocking pulses to match the speed of the data transmission.
* pleisiochronous, is a transmission method that uses more than one timing source, sometimes running at different speeds. This method may require master and slave clock devices. Source: Communications Systems and Networks by
Ray Horak (M&T Books, 2000).

質問 # 523
What is known as the probability that you are not authenticated to access your account?

• A. FRR
• B. FAR
• C. MTBF
• D. ERR

正解：A

解説：
Biometric performance is most commonly measured in two ways: False Rejection Rate (FRR), and False Acceptance Rate (FAR). The FRR is the probability that you are not authenticated to access your account. A strict definition states that the FRR is the probability that a mated comparison (i.e. 2 biometric samples of the same finger) incorrectly determines that there is no match.

質問 # 524
......

ISC CISSP 認定試験は、情報セキュリティ分野で最も難しい認定試験の一つと考えられています。試験は、情報セキュリティのさまざまなドメインにおける候補者の知識とスキルをテストするように設計されており、合格スコアは厳格な評価プロセスによって決定されます。試験は、6時間以内に完了しなければならない250の多肢選択問題で構成されています。試験はコンピュータベースであり、世界中のPearson VUEテストセンターで実施されています。

 

あなたをお手軽にCISSP試験合格させるし100%試験合格保証：https://jp.fast2test.com/CISSP-premium-file.html

100%無料CISSP試験問題集実際問題を使おうISC Certification問題集：https://drive.google.com/open?id=16GSr3L8gT64DNlRmunUEbgWMaaQAhnXp