[2024年06月26日] 無料ダウンロードCisco 500-470リアル試験問題
あなたを合格させる試験には100%確認済み500-470試験問題
質問 # 17
Which three technologies are used in an SD-Access Fabric? (Choose three.)
- A. VXLAN
- B. TrustSec
- C. RSVP
- D. MPLS
- E. OTV
- F. LISP
正解：A、B、F
質問 # 18
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)
- A. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
- B. Cisco Active Advisor provides additional guidance for ISE deployments
- C. ISE requires an understanding of the command line for set-up and configuration.
- D. Cisco ISE includes wireless setup wizard and visibility wizard.
- E. ISE wizards and pre-canned configurations ease ISE roll-out significantly.
正解：A、B、D
質問 # 19
Which options are Network Access Device types?
- A. Switches, Wireless Controllers, and VPN Gateways
- B. Wireless Controllers, Routers, and VPN Gateways
- C. Switches, Routers, and VPN Gateways
- D. Switches, Wireless Controllers, and Routers
正解：A
質問 # 20
Which protocol is used between an Endpoint and a Switch with an 802.1 authentication?
- A. TACACS
- B. EAP
- C. RADIUS
- D. MAB
正解：B
質問 # 21
How many vEdge router security zones (VPN's) can be configured?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
Explanation
https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/Release_18.1/04Segmentation/02Conf
質問 # 22
How many bytes does a VxLAN header add to an original Ethernet frame?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
Explanation
https://www.arista.com/assets/data/pdf/Whitepapers/Arista_Networks_VXLAN_White_Paper.pdf A VxLAN header adds 50 bytes to an original Ethernet frame. This is because a VxLAN header consists of the following components:
8-byte outer UDP header for VxLAN: The default VxLAN destination UDP port number is 47891
20-byte outer IP header: Valid addresses of VTEPs or VxLAN multicast groups on the transport network. Devices in the transport network forward VxLAN packets based on the outer IP header1
8-byte VxLAN header: VxLAN information for the frame. It includes a 24-bit VxLAN Network Identifier (VNI) that identifies the VxLAN of the frame, and an 8-bit flags field that indicates the validity of the VNI1
14-byte inner Ethernet header: The original Ethernet header of the encapsulated frame. It includes the source and destination MAC addresses, the EtherType, and optionally a 4-byte VLAN tag2 The total size of these components is 8 + 20 + 8 + 14 = 50 bytes. Therefore, a VxLAN header adds 50 bytes to an original Ethernet frame.
References :=
VXLAN packet format - Aruba
MTU Considerations for VXLAN | Matt Oswalt
質問 # 23
Which two options are SD-WAN solution capabilities? (Choose two.)
- A. Cloud hosted or on-Premise fully redundant management and control plane functions
- B. The separation of management plane, control plane and data plane to enable horizontal scaling
- C. Truck roll branch turn up for easy provisioning and new installations
- D. Ability to provide and integrate security with complementary products and applications
正解：A、B
質問 # 24
What is an example of Correlated Insights for SDA and Switching?
- A. Roaming Pattern Analysis
- B. Control Plane Reachability
- C. AP License Utilization
- D. Excessive Onboarding Time
正解：B
質問 # 25
Which two are benefits from a WAN design? (Choose two.)
- A. Lower circuit bandwidth requirements
- B. Provide lower quality service to guest users
- C. Ensure remote site uptime
- D. Prioritize and secure with granular control
- E. Reduce cost and increase operational complexity
正解：A、D
質問 # 26
What is the maximum # of concurrent endpoint with a distributed deployment?
- A. 500,000
- B. 100,000
- C. 10,000
- D. 20,000
正解：A
質問 # 27
Which three methods three technologies and deployed to gather data and provide insight? (Choose three.)
- A. IPv6
- B. FNF
- C. ARP caching
- D. BUM traffic
- E. Syslog
- F. SNMP
正解：B、E、F
解説：
Explanation
Syslog, FNF (Flexible NetFlow), and SNMP (Simple Network Management Protocol) are three technologies that can be deployed to gather data and provide insight into the network performance, health, and behavior.
Syslog is a standard protocol for logging messages from network devices, such as routers, switches, firewalls, and servers. Syslog messages can be sent to a centralized server for analysis, correlation, and alerting. FNF is a Cisco technology that captures and exports information about network flows, such as source and destination IP addresses, ports, protocols, bytes, packets, and timestamps. FNF can be used to monitor network traffic patterns, identify anomalies, and optimize network resources. SNMP is a protocol that allows network devices to communicate with management systems, such as Cisco DNA Center. SNMP can be used to collect statistics, configuration, and status information from network devices, as well as to send commands and notifications. SNMP can help network administrators to troubleshoot, configure, and manage their network devices remotely. References: Cisco DNA Center User Guide, Release 1.3.1.0 - Monitor the Network 1, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure Flexible NetFlow 2, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure SNMP 3
質問 # 28
Which three services must be enabled under the ISE Admin settings to successfully integrateISE, when integrating ISE with DNA-C? (Choose three.)
- A. Infoblox
- B. Threat-Centric NAC
- C. PxGrid
- D. SXP services
- E. Passive Identity Service
- F. ServiceNow
正解：A、D、F
解説：
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA): This is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE) by providing a guided workflow for configuring the most common ISE use cases, such as guest access, BYOD, and secure wired and wireless access1. IDA also provides validation checks, best practices, and troubleshooting tips to ensure a successful deployment.
Wireless Setup Wizard and Visibility Wizard: These are two of the several wizards that Cisco ISE provides to simplify the configuration of various ISE functions and features. The Wireless Setup Wizard helps to configure the wireless network settings, such as SSIDs, authentication methods, and policies, for secure wireless access2. The Visibility Wizard helps to enable the ISE profiling service, which collects and analyzes endpoint data to identify, classify, and monitor devices on the network3.
ISE Wizards and Pre-Canned Configurations: These are the tools that ease the ISE roll-out significantly by providing ready-made templates, policies, and settings for common ISE scenarios, such as posture assessment, device administration, and threat-centric NAC. These tools help to reduce the manual configuration efforts and errors, and speed up the time to value.
References:
1: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Deployment Assistant [Cisco Identity Services Engine]] : 2: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Wireless Setup Wizard [Cisco Identity Services Engine]] : 3: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Visibility Wizard [Cisco Identity Services Engine]] : : [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Wizards and Pre-Canned Configurations [Cisco Identity Services Engine]]
質問 # 29
Which are three key features within the Cisco ISE that mainly compete with the other RADIUS and NAC products? (Choose three.)
- A. Ability to authenticate and authorize users and endpoints.
- B. Deep packet inspection upon authorization of endpoints.
- C. Software based firewall capabilities for selected devices and endpoints.
- D. Guest access and guest lifecycle management functionality.
- E. BYOD provides auto configuration of endpoints.
正解：A、D、E
質問 # 30
What is the default interval for BFD packets?
- A. 1 second
- B. 5 seconds
- C. 10 seconds
- D. 15 seconds
正解：A
質問 # 31
Which two platforms can host a vEdge Cloud Router? (Choose two.)
- A. Microsoft Azure
- B. Dreamhost
- C. DigitalCloud
- D. Google
- E. AWS
正解：A、E
解説：
Explanation
https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/sd-wan/nb-07-clo ud-router-data-sheet-cte-en.pdf A vEdge Cloud Router is a virtualized version of the vEdge router that can be deployed in various cloud environments. According to the Cisco vEdge Cloud Data Sheet1, the vEdge Cloud Router can be instantiated as a virtual machine (VM) on a KVM hypervisor or as a VM on a VMware ESXi hypervisor, as well as in public cloud environments, such as Amazon AWS or Google Cloud Platform. Therefore, the two platforms that can host a vEdge Cloud Router are AWS and Microsoft Azure.
References:
1: [Solutions - Cisco vEdge Cloud Data Sheet - Cisco]
質問 # 32
Which two are benefits from a WAN design? (Choose two.)
- A. Provide lower quality service to guest users
- B. Prioritize and secure with granular control
- C. Lower circuit bandwidth requirements
- D. Ensure remote site uptime
- E. Reduce cost and increase operational complexity
正解：B、D
質問 # 33
Which two platforms can host a vEdge Cloud Router? (Choose two.)
- A. Microsoft Azure
- B. Dreamhost
- C. DigitalCloud
- D. Google
- E. AWS
正解：A、E
質問 # 34
Which workflow is necessary for setting up a network hierarchy?
- A. Provision
- B. Policy
- C. Design
- D. Assurance
正解：C
解説：
Explanation
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-c The workflow that is necessary for setting up a network hierarchy is Design. The Design area is where you create the structure and framework of your network, including the physical topology, network settings, and device type profiles that you can apply to devices throughout your network. You can create a network hierarchy that represents your network's geographical locations, such as sites, buildings, and floors. You can also define global network settings, such as device credentials, IP address pools, service provider profiles, and network servers. You can also create network profiles, which are collections of design settings that you can assign to devices based on their roles and functions1.
References:
1: [Cisco DNA Center User Guide, Release 2.2.3 - Design Network Hierarchy and Settings [Cisco DNA Center] - Cisco]
質問 # 35
Which three methods can be implemented and deployed to gather data and provide insight? (Choose three.)
- A. IPv6
- B. FNF
- C. ARP caching
- D. BUM traffic
- E. Syslog
- F. SNMP
正解：B、E、F
質問 # 36
......
試験に備えるために、受験者はCiscoの公式学習資料、オンライントレーニングコース、模擬試験など、さまざまなリソースを活用することができます。また、Ciscoベースの企業ネットワークの実装や管理の経験を生かして、試験のトピックをより深く理解し、試験に合格する可能性を高めることもできます。全体的に、Cisco 500-470試験は、CiscoのSDA、SDWAN、およびISE技術に関するスキルと知識を向上させたいシステムエンジニアにとって貴重な認定資格です。
Cisco 500-470認定試験は、Cisco Enterprise Networks SDA、SDWAN、およびISEと協力するシステムエンジニアにとって重要な資格です。この試験は、複雑なネットワークソリューションの設計、展開、および管理を担当する専門家の知識とスキルをテストするように設計されています。試験は、ネットワークデザイン、実装、トラブルシューティングなど、様々なトピックをカバーしています。
500-470問題集100パー合格保証には最新のサンプル：https://jp.fast2test.com/500-470-premium-file.html
500-470問題PDFで500-470リアル試験問題解答：https://drive.google.com/open?id=1_Hve2gMFa63XNX1Zc_EX5niRIrFGY5oo